X-Git-Url: http://wien.tomnetworks.com/gitweb/?a=blobdiff_plain;f=summon-arm-toolchain;h=a802697c63b71637f118451e7d09399e837c7d3f;hb=2d05c56958e1aaf94b39a5a16377fdb96bc36ad7;hp=c8c29d54456a4c0d2306a0c59ddd3096b78a8dc0;hpb=ccb4e0ff2d07bddc8f15254dad6b7af4f169f064;p=summon-arm-toolchain.git diff --git a/summon-arm-toolchain b/summon-arm-toolchain index c8c29d5..a802697 100755 --- a/summon-arm-toolchain +++ b/summon-arm-toolchain @@ -2,47 +2,162 @@ # Written by Uwe Hermann , released as public domain. # Modified by Piotr Esden-Tempski , released as public domain. -# -# Requirements (example is for Debian, replace package names as needed): -# -# apt-get install flex bison libgmp3-dev libmpfr-dev libncurses5-dev \ -# libmpc-dev autoconf texinfo build-essential -# +# adapted for r0ket development by +# Matthias Rampke +# requires Homebrew # Stop if any command fails set -e -TARGET=arm-none-eabi # Or: TARGET=arm-elf -PREFIX=${HOME}/arm-none-eabi # Install location of your final toolchain +############################################################################## +# Settings section +# You probably want to customize those +############################################################################## +TARGET=arm-eabi # Or: TARGET=arm-elf +PREFIX=${HOME}/arm # Install location of your final toolchain PARALLEL= # Or: PARALLEL="-j 5" for 4 CPUs -DARWIN_OPT_PATH=/opt/local # Path in which MacPorts or Fink is installed +# Set to 'sudo' if you need superuser privileges while installing +SUDO='' +# Set to 1 to be quieter while running +QUIET=0 +# Set to 1 to use linaro gcc instead of the FSF gcc +USE_LINARO=1 +# Set to 1 to enable building of OpenOCD +OOCD_EN=1 +# Set to 1 to build libstm32 provided by ST +LIBSTM32_EN=0 +# Set to 1 to build libopenstm32 an open source library for stm32 +LIBOPENSTM32_EN=1 +# Make the gcc default to Cortex-M3 +DEFAULT_TO_CORTEX_M3=1 + +############################################################################## +# Version and download url settings section +############################################################################## +if [ ${USE_LINARO} == 0 ] ; then + # For FSF GCC: + GCCVERSION=4.5.1 + GCC=gcc-${GCCVERSION} + GCCDIR=${GCC} + GCCURL=http://ftp.gnu.org/gnu/gcc/${GCC}/${GCC}.tar.gz +else + # For the Linaro GCC: + GCCRELEASE=4.6-2011.07 + GCCVERSION=4.6-2011.07-0 + GCC=gcc-linaro-${GCCRELEASE} + GCCDIR=gcc-linaro-${GCCVERSION} + GCCURL=http://launchpad.net/gcc-linaro/4.6/${GCCRELEASE}/+download/gcc-linaro-${GCCRELEASE}.tar.bz2 +fi -BINUTILS=binutils-2.20 -GCC=gcc-4.5.1 -NEWLIB=newlib-1.18.0 -GDB=gdb-7.2 +BINUTILS=binutils-2.21 +NEWLIB=newlib-1.19.0 +GDB=gdb-7.3 +OOCD=master LIBCMSIS=v1.10-2 LIBSTM32=v3.0.0-1 LIBSTM32USB=v3.0.1-1 LIBOPENSTM32=master -LIBSTM32_EN=0 -LIBOPENSTM32_EN=0 + +############################################################################## +# Flags section +############################################################################## + +if which getconf > /dev/null; then + CPUS=$(getconf _NPROCESSORS_ONLN) +else + CPUS=1 +fi +PARALLEL=-j$((CPUS + 1)) +echo "${CPUS} cpu's detected running make with '${PARALLEL}' flag" + +GDBFLAGS= +BINUTILFLAGS= + +if [ ${DEFAULT_TO_CORTEX_M3} == 0 ] ; then + GCCFLAGS= +else + # To default to the Cortex-M3: + GCCFLAGS="--with-arch=armv7-m --with-mode=thumb --with-float=soft" +fi + +# Pull in the local configuration, if any +if [ -f local.sh ]; then + . ./local.sh +fi + +MAKEFLAGS=${PARALLEL} +TARFLAGS=v + +if [ ${QUIET} != 0 ]; then + TARFLAGS= + MAKEFLAGS="${MAKEFLAGS} -s" +fi + +export PATH="${PREFIX}/bin:${PATH}" SUMMON_DIR=$(pwd) SOURCES=${SUMMON_DIR}/sources STAMPS=${SUMMON_DIR}/stamps -export PATH="${PREFIX}/bin:${PATH}" -GCCFLAGS= -GDBFLAGS= -BINUTILFLAGS= +############################################################################## +# Tool section +############################################################################## +TAR=tar + +############################################################################## +# OS and Tooldetection section +# Detects which tools and flags to use +############################################################################## + +case "$(uname)" in + Linux) + echo "Found Linux OS." + ;; + Darwin) + echo "Found Darwin OS." + + # darwin dependencies + DARWINDEPS="wget mpfr libmpc gmp" + DARWINDEPSCOUNT=4 + + echo "Installing dependencies ..." + if ! which brew > /dev/null; then + echo "Homebrew not installed." + else + brew install ${DARWINDEPS} | (grep -v '^Warning: Formula already installed: ' || true) + fi + + GCCFLAGS="${GCCFLAGS} \ + --with-gmp=$(brew --prefix gmp) \ + --with-mpfr=$(brew --prefix mpfr) \ + --with-mpc=$(brew --prefix mpc) + -with-libiconv-prefix=$(brew --prefix libiconv)" + + TAR=gnutar + + OOCD_CFLAGS="-m32 -I/opt/mine/include -I/opt/local/include" + OOCD_LDFLAGS="-L/opt/mine/lib -L/opt/local/lib" + ;; + CYGWIN*) + echo "Found CygWin that means Windows most likely." + ;; + *) + echo "Found unknown OS. Aborting!" + exit 1 + ;; +esac + +############################################################################## +# Building section +# You probably don't have to touch anything after this +############################################################################## # Fetch a versioned file from a URL function fetch { if [ ! -e ${STAMPS}/$1.fetch ]; then - echo "Downloading $1 sources..." - wget -c --no-passive-ftp $2 + log "Downloading $1 sources..." + wget -c $2 touch ${STAMPS}/$1.fetch fi } @@ -56,40 +171,60 @@ function log { # Unpack an archive function unpack { + log Unpacking $* # Use 'auto' mode decompression. Replace with a switch if tar doesn't support -a - tar xvaf $1 + ARCHIVE=$(ls ${SOURCES}/$1.tar.*) + case ${ARCHIVE} in + *.bz2) + echo "archive type bz2" + TYPE=j + ;; + *.gz) + echo "archive type gz" + TYPE=z + ;; + *) + echo "Unknown archive type of $1" + echo ${ARCHIVE} + exit 1 + ;; + esac + ${TAR} xf${TYPE}${TARFLAGS} ${SOURCES}/$1.tar.* +} + +# Install a build +function install { + log $1 + ${SUDO} make ${MAKEFLAGS} $2 $3 $4 $5 $6 $7 $8 } -case "$(uname)" in - Linux) - echo "Found Linux OS." - ;; - Darwin) - echo "Found Darwin OS." - GCCFLAGS="${GCCFLAGS} \ - --with-gmp=${DARWIN_OPT_PATH} \ - --with-mpfr=${DARWIN_OPT_PATH} \ - --with-mpc=${DARWIN_OPT_PATH} \ - -with-libiconv-prefix=${DARWIN_OPT_PATH}" - ;; - *) - echo "Found unknown OS. Aborting!" - exit 1 - ;; -esac mkdir -p ${STAMPS} ${SOURCES} cd ${SOURCES} fetch ${BINUTILS} http://ftp.gnu.org/gnu/binutils/${BINUTILS}.tar.bz2 -fetch ${GCC} ${GCC_URL} +fetch ${GCC} ${GCCURL} fetch ${NEWLIB} ftp://sources.redhat.com/pub/newlib/${NEWLIB}.tar.gz fetch ${GDB} http://ftp.gnu.org/gnu/gdb/${GDB}.tar.bz2 +if [ ${OOCD_EN} != 0 ]; then +if [ ! -e openocd-${OOCD}.tar.bz2 ]; then + log "Cloning OpenOCD sources..." + git clone git://openocd.git.sourceforge.net/gitroot/openocd/openocd openocd-${OOCD} + cd openocd-${OOCD} + ./bootstrap + cd .. + tar cfvj openocd-${OOCD}.tar.bz2 openocd-${OOCD} + #git archive --format=tar --prefix=openocd-${OOCD}/ ${OOCD} | \ + # bzip2 --stdout > ../openocd-${OOCD}.tar.bz2 + rm -rf openocd-${OOCD} +fi +fi + if [ ${LIBSTM32_EN} != 0 ]; then if [ ! -e libcmsis-${LIBCMSIS}.tar.bz2 ]; then - echo "Cloning libcmsis sources..." + log "Cloning libcmsis sources..." git clone git://git.open-bldc.org/libcmsis.git cd libcmsis git archive --format=tar --prefix=libcmsis-${LIBCMSIS}/ ${LIBCMSIS} | \ @@ -99,7 +234,7 @@ if [ ! -e libcmsis-${LIBCMSIS}.tar.bz2 ]; then fi if [ ! -e libstm32-${LIBSTM32}.tar.bz2 ]; then - echo "Cloning libstm32 sources..." + log "Cloning libstm32 sources..." git clone git://git.open-bldc.org/libstm32.git cd libstm32 git archive --format=tar --prefix=libstm32-${LIBSTM32}/ ${LIBSTM32} | \ @@ -109,7 +244,7 @@ if [ ! -e libstm32-${LIBSTM32}.tar.bz2 ]; then fi if [ ! -e libstm32usb-${LIBSTM32USB}.tar.bz2 ]; then - echo "Cloning libstm32usb sources..." + log "Cloning libstm32usb sources..." git clone git://git.open-bldc.org/libstm32usb.git cd libstm32usb git archive --format=tar --prefix=libstm32usb-${LIBSTM32USB}/ ${LIBSTM32USB} | \ @@ -121,7 +256,7 @@ fi if [ ${LIBOPENSTM32_EN} != 0 ]; then if [ ! -e libopenstm32-${LIBOPENSTM32}.tar.bz2 ]; then - echo "Cloning libopenstm32 sources..." + log "Cloning libopenstm32 sources..." git clone git://libopenstm32.git.sourceforge.net/gitroot/libopenstm32/libopenstm32 cd libopenstm32 git archive --format=tar --prefix=libopenstm32-${LIBOPENSTM32}/ ${LIBOPENSTM32} | \ @@ -138,8 +273,7 @@ if [ ! -e build ]; then fi if [ ! -e ${STAMPS}/${BINUTILS}.build ]; then - log "Unpacking ${BINUTILS}" - unpack ${SOURCES}/${BINUTILS}.tar.bz2 + unpack ${BINUTILS} cd build log "Configuring ${BINUTILS}" ../${BINUTILS}/configure --target=${TARGET} \ @@ -152,9 +286,8 @@ if [ ! -e ${STAMPS}/${BINUTILS}.build ]; then --disable-werror \ ${BINUTILFLAGS} log "Building ${BINUTILS}" - make ${PARALLEL} - log "Installing ${BINUTILS}" - make install + make ${MAKEFLAGS} + install ${BINUTILS} install cd .. log "Cleaning up ${BINUTILS}" touch ${STAMPS}/${BINUTILS}.build @@ -162,11 +295,10 @@ if [ ! -e ${STAMPS}/${BINUTILS}.build ]; then fi if [ ! -e ${STAMPS}/${GCC}-boot.build ]; then - log "Unpacking ${GCC}-boot" - unpack ${SOURCES}/${GCC}.tar.bz2 + unpack ${GCC} boot cd build log "Configuring ${GCC}-boot" - ../${GCC}/configure --target=${TARGET} \ + ../${GCCDIR}/configure --target=${TARGET} \ --prefix=${PREFIX} \ --enable-interwork \ --enable-multilib \ @@ -178,20 +310,19 @@ if [ ! -e ${STAMPS}/${GCC}-boot.build ]; then --with-gnu-ld \ --disable-nls \ --disable-werror \ + --with-system-zlib \ ${GCCFLAGS} log "Building ${GCC}-boot" - make ${PARALLEL} all-gcc - log "Installing ${GCC}-boot" - make install-gcc + make ${MAKEFLAGS} all-gcc + install ${GCC}-boot install-gcc cd .. log "Cleaning up ${GCC}-boot" touch ${STAMPS}/${GCC}-boot.build - rm -rf build/* ${GCC} + rm -rf build/* ${GCCDIR} fi if [ ! -e ${STAMPS}/${NEWLIB}.build ]; then - log "Unpacking ${NEWLIB}" - unpack ${SOURCES}/${NEWLIB}.tar.gz + unpack ${NEWLIB} cd build log "Configuring ${NEWLIB}" ../${NEWLIB}/configure --target=${TARGET} \ @@ -202,11 +333,11 @@ if [ ! -e ${STAMPS}/${NEWLIB}.build ]; then --with-gnu-ld \ --disable-nls \ --disable-werror \ - --disable-newlib-supplied-syscalls + --disable-newlib-supplied-syscalls \ + --with-float=soft log "Building ${NEWLIB}" - make ${PARALLEL} - log "Installing ${NEWLIB}" - make install + make ${MAKEFLAGS} CFLAGS_FOR_TARGET="-msoft-float" CCASFLAGS="-msoft-float" + install ${NEWLIB} install cd .. log "Cleaning up ${NEWLIB}" touch ${STAMPS}/${NEWLIB}.build @@ -215,11 +346,10 @@ fi # Yes, you need to build gcc again! if [ ! -e ${STAMPS}/${GCC}.build ]; then - log "Unpacking ${GCC}" - unpack ${SOURCES}/${GCC}.tar.bz2 + unpack ${GCC} cd build log "Configuring ${GCC}" - ../${GCC}/configure --target=${TARGET} \ + ../${GCCDIR}/configure --target=${TARGET} \ --prefix=${PREFIX} \ --enable-interwork \ --enable-multilib \ @@ -230,20 +360,19 @@ if [ ! -e ${STAMPS}/${GCC}.build ]; then --with-gnu-ld \ --disable-nls \ --disable-werror \ + --with-system-zlib \ ${GCCFLAGS} log "Building ${GCC}" - make ${PARALLEL} - log "Installing ${GCC}" - make install + make ${MAKEFLAGS} + install ${GCC} install cd .. log "Cleaning up ${GCC}" touch ${STAMPS}/${GCC}.build - rm -rf build/* ${GCC} + rm -rf build/* ${GCCDIR} fi if [ ! -e ${STAMPS}/${GDB}.build ]; then - log "Unpacking ${GDB}" - unpack ${SOURCES}/${GDB}.tar.bz2 + unpack ${GDB} cd build log "Configuring ${GDB}" ../${GDB}/configure --target=${TARGET} \ @@ -253,69 +382,97 @@ if [ ! -e ${STAMPS}/${GDB}.build ]; then --disable-werror \ ${GDBFLAGS} log "Building ${GDB}" - make ${PARALLEL} - log "Installing ${GDB}" - make install + make ${MAKEFLAGS} + install ${GDB} install cd .. log "Cleaning up ${GDB}" touch ${STAMPS}/${GDB}.build rm -rf build/* ${GDB} fi +if [ ${OOCD_EN} != 0 ]; then +if [ ! -e ${STAMPS}/openocd-${OOCD}.build ]; then + unpack openocd-${OOCD} + cd build + log "Configuring openocd-${OOCD}" + CFLAGS="${CFLAGS} ${OOCD_CFLAGS}" \ + LDFLAGS="${LDFLAGS} ${OOCD_LDFLAGS}" \ + ../openocd-${OOCD}/configure --enable-maintainer-mode \ + --prefix=${PREFIX} \ + --enable-dummy \ + --enable-parport \ + --enable-ft2232_libftdi \ + --enable-usb_blaster_libftdi \ + --enable-amtjtagaccel \ + --enable-zy1000 \ + --enable-ep93xx \ + --enable-at91rm9200 \ + --enable-gw16012 \ + --enable-presto_libftdi \ + --enable-usbprog \ + --enable-jlink \ + --enable-vsllink \ + --enable-rlink \ + --enable-arm-jtag-ew \ + --enable-buspirate + log "Building openocd-${OOCD}" + make ${MAKEFLAGS} + install openocd-${OOCD} install + cd .. + log "Cleaning up openocd-${OOCD}" + touch ${STAMPS}/openocd-${OOCD}.build + rm -rf build/* ${OOCD} +fi +fi + if [ ${LIBSTM32_EN} != 0 ]; then -if [ ! -e .libcmsis-${LIBCMSIS}.build ]; then - log "Unpacking libcmsis-${LIBCMSIS}" - unpack ${SOURCES}/libcmsis-${LIBCMSIS}.tar.bz2 +if [ ! -e ${STAMPS}/libcmsis-${LIBCMSIS}.build ]; then + unpack libcmsis-${LIBCMSIS} cd libcmsis-${LIBCMSIS} log "Building libcmsis-${LIBCMSIS}" make arch_prefix=${TARGET} prefix=${PREFIX} - log "Installing libcmsis-${LIBCMSIS}" - make arch_prefix=${TARGET} prefix=${PREFIX} install + install libcmsis-${LIBCMSIS} arch_prefix=${TARGET} prefix=${PREFIX} install cd .. log "Cleaning up libcmsis-${LIBCMSIS}" - touch .libcmsis-${LIBCMSIS}.build + touch ${STAMPS}/libcmsis-${LIBCMSIS}.build rm -rf libcmsis-${LIBCMSIS} fi -if [ ! -e .libstm32-${LIBSTM32}.build ]; then - log "Unpacking libstm32-${LIBSTM32}" - unpack ${SOURCES}/libstm32-${LIBSTM32}.tar.bz2 +if [ ! -e ${STAMPS}/libstm32-${LIBSTM32}.build ]; then + unpack libstm32-${LIBSTM32} cd libstm32-${LIBSTM32} log "Building libstm32-${LIBSTM32}" make arch_prefix=${TARGET} prefix=${PREFIX} - log "Installing libstm32-${LIBSTM32}" - make arch_prefix=${TARGET} prefix=${PREFIX} install + install libstm32-${LIBSTM32} arch_prefix=${TARGET} prefix=${PREFIX} install cd .. log "Cleaning up libstm32-${LIBSTM32}" - touch .libstm32-${LIBSTM32}.build + touch ${STAMPS}/libstm32-${LIBSTM32}.build rm -rf libstm32-${LIBSTM32} fi -if [ ! -e .libstm32usb-${LIBSTM32USB}.build ]; then - log "Unpacking libstm32usb-${LIBSTM32USB}" - unpack ${SOURCES}/libstm32usb-${LIBSTM32USB}.tar.bz2 +if [ ! -e ${STAMPS}/libstm32usb-${LIBSTM32USB}.build ]; then + unpack libstm32usb-${LIBSTM32USB} cd libstm32usb-${LIBSTM32USB} log "Building libstm32usb-${LIBSTM32USB}" make arch_prefix=${TARGET} prefix=${PREFIX} - log "Installing libstm32usb-${LIBSTM32USB}" - make arch_prefix=${TARGET} prefix=${PREFIX} install + install libstm32usb-${LIBSTM32USB} arch_prefix=${TARGET} prefix=${PREFIX} install cd .. log "Cleaning up libstm32usb-${LIBSTM32USB}" - touch .libstm32usb-${LIBSTM32USB}.build + touch ${STAMPS}/libstm32usb-${LIBSTM32USB}.build rm -rf libstm32usb-${LIBSTM32USB} fi fi if [ $LIBOPENSTM32_EN != 0 ]; then - log "Unpacking libopenstm32-${LIBOPENSTM32}" - unpack ${SOURCES}/libopenstm32-${LIBOPENSTM32}.tar.bz2 +if [ ! -e ${STAMPS}/libopenstm32-${LIBOPENSTM32}.build ]; then + unpack libopenstm32-${LIBOPENSTM32} cd libopenstm32-${LIBOPENSTM32} log "Building libopenstm32-${LIBOPENSTM32}" make PREFIX=${TARGET} DESTDIR=${PREFIX} - log "Installing libopenstm32-${LIBOPENSTM32}" - make PREFIX=${TARGET} DESTDIR=${PREFIX} install + install libopenstm32-${LIBOPENSTM32} PREFIX=${TARGET} DESTDIR=${PREFIX} install cd .. log "Cleaning up libopenstm32-${LIBOPENSTM32}" - touch .libopenstm32-${LIBOPENSTM32}.build + touch ${STAMPS}/libopenstm32-${LIBOPENSTM32}.build rm -rf libopenstm32-${LIBOPENSTM32} fi +fi