X-Git-Url: http://wien.tomnetworks.com/gitweb/?a=blobdiff_plain;f=summon-arm-toolchain;h=a802697c63b71637f118451e7d09399e837c7d3f;hb=2d05c56958e1aaf94b39a5a16377fdb96bc36ad7;hp=3a94e7d6e8f78b95b5ded3d6bb746a1df81b7256;hpb=7ba35f9f324808413b2ff414e36018fa198ed1cd;p=summon-arm-toolchain.git diff --git a/summon-arm-toolchain b/summon-arm-toolchain index 3a94e7d..a802697 100755 --- a/summon-arm-toolchain +++ b/summon-arm-toolchain @@ -2,14 +2,9 @@ # Written by Uwe Hermann , released as public domain. # Modified by Piotr Esden-Tempski , released as public domain. -# -# Requirements (example is for Debian, replace package names as needed): -# -# apt-get install flex bison libgmp3-dev libmpfr-dev libncurses5-dev \ -# libmpc-dev autoconf texinfo build-essential -# -# Or on Ubuntu Maverick give `apt-get build-dep gcc-4.5` a try. -# +# adapted for r0ket development by +# Matthias Rampke +# requires Homebrew # Stop if any command fails set -e @@ -18,22 +13,23 @@ set -e # Settings section # You probably want to customize those ############################################################################## -TARGET=arm-elf # Or: TARGET=arm-elf -PREFIX=/arm # Install location of your final toolchain +TARGET=arm-eabi # Or: TARGET=arm-elf +PREFIX=${HOME}/arm # Install location of your final toolchain PARALLEL= # Or: PARALLEL="-j 5" for 4 CPUs -DARWIN_OPT_PATH=/opt/local # Path in which MacPorts or Fink is installed # Set to 'sudo' if you need superuser privileges while installing -SUDO='sudo' +SUDO='' # Set to 1 to be quieter while running QUIET=0 # Set to 1 to use linaro gcc instead of the FSF gcc USE_LINARO=1 +# Set to 1 to enable building of OpenOCD +OOCD_EN=1 # Set to 1 to build libstm32 provided by ST LIBSTM32_EN=0 # Set to 1 to build libopenstm32 an open source library for stm32 -LIBOPENSTM32_EN=0 +LIBOPENSTM32_EN=1 # Make the gcc default to Cortex-M3 -DEFAULT_TO_CORTEX_M3=0 +DEFAULT_TO_CORTEX_M3=1 ############################################################################## # Version and download url settings section @@ -42,17 +38,21 @@ if [ ${USE_LINARO} == 0 ] ; then # For FSF GCC: GCCVERSION=4.5.1 GCC=gcc-${GCCVERSION} + GCCDIR=${GCC} GCCURL=http://ftp.gnu.org/gnu/gcc/${GCC}/${GCC}.tar.gz else # For the Linaro GCC: - GCCVERSION=4.5-2010.08-1 - GCC=gcc-linaro-${GCCVERSION} - GCCURL=http://launchpad.net/gcc-linaro/4.5/${GCCVERSION}/+download/${GCC}.tar.gz + GCCRELEASE=4.6-2011.07 + GCCVERSION=4.6-2011.07-0 + GCC=gcc-linaro-${GCCRELEASE} + GCCDIR=gcc-linaro-${GCCVERSION} + GCCURL=http://launchpad.net/gcc-linaro/4.6/${GCCRELEASE}/+download/gcc-linaro-${GCCRELEASE}.tar.bz2 fi -BINUTILS=binutils-2.20 -NEWLIB=newlib-1.18.0 -GDB=gdb-7.2 +BINUTILS=binutils-2.21 +NEWLIB=newlib-1.19.0 +GDB=gdb-7.3 +OOCD=master LIBCMSIS=v1.10-2 LIBSTM32=v3.0.0-1 LIBSTM32USB=v3.0.1-1 @@ -62,6 +62,14 @@ LIBOPENSTM32=master # Flags section ############################################################################## +if which getconf > /dev/null; then + CPUS=$(getconf _NPROCESSORS_ONLN) +else + CPUS=1 +fi +PARALLEL=-j$((CPUS + 1)) +echo "${CPUS} cpu's detected running make with '${PARALLEL}' flag" + GDBFLAGS= BINUTILFLAGS= @@ -69,7 +77,7 @@ if [ ${DEFAULT_TO_CORTEX_M3} == 0 ] ; then GCCFLAGS= else # To default to the Cortex-M3: - GCCFLAGS="--with-arch=armv7-m --with-mode=thumb" + GCCFLAGS="--with-arch=armv7-m --with-mode=thumb --with-float=soft" fi # Pull in the local configuration, if any @@ -91,52 +99,49 @@ SUMMON_DIR=$(pwd) SOURCES=${SUMMON_DIR}/sources STAMPS=${SUMMON_DIR}/stamps + +############################################################################## +# Tool section +############################################################################## +TAR=tar + ############################################################################## # OS and Tooldetection section -# Detects which tools to use +# Detects which tools and flags to use ############################################################################## case "$(uname)" in Linux) echo "Found Linux OS." - TAR=tar ;; Darwin) echo "Found Darwin OS." # darwin dependencies - DARWINDEPS="gnutar mpfr libmpc gmp" + DARWINDEPS="wget mpfr libmpc gmp" DARWINDEPSCOUNT=4 - GCCFLAGS="${GCCFLAGS} \ - --with-gmp=${DARWIN_OPT_PATH} \ - --with-mpfr=${DARWIN_OPT_PATH} \ - --with-mpc=${DARWIN_OPT_PATH} \ - -with-libiconv-prefix=${DARWIN_OPT_PATH}" - - echo "Attempting to automatically check if common dependencies are installed on your system" - if ! which port > /dev/null; then - echo "MacPorts not installed." + echo "Installing dependencies ..." + if ! which brew > /dev/null; then + echo "Homebrew not installed." else - pc=`port installed ${DARWINDEPS} | wc -l | tr -d " "` - if [ ${pc} -lt $[${DARWINDEPSCOUNT}+1] ]; - then - echo "Something is missing, do you want to install everything needed?" - echo "(You need super user rights to do this.)" - - if [ read = "y" || read = "yes" ]; - then - sudo port install ${DARWINDEPS} - fi - else - echo "Found: "${DARWINDEPS}"!" - fi + brew install ${DARWINDEPS} | (grep -v '^Warning: Formula already installed: ' || true) fi + GCCFLAGS="${GCCFLAGS} \ + --with-gmp=$(brew --prefix gmp) \ + --with-mpfr=$(brew --prefix mpfr) \ + --with-mpc=$(brew --prefix mpc) + -with-libiconv-prefix=$(brew --prefix libiconv)" + TAR=gnutar + OOCD_CFLAGS="-m32 -I/opt/mine/include -I/opt/local/include" + OOCD_LDFLAGS="-L/opt/mine/lib -L/opt/local/lib" + ;; + CYGWIN*) + echo "Found CygWin that means Windows most likely." ;; - *) echo "Found unknown OS. Aborting!" exit 1 @@ -152,7 +157,7 @@ esac function fetch { if [ ! -e ${STAMPS}/$1.fetch ]; then log "Downloading $1 sources..." - wget -c --no-passive-ftp $2 + wget -c $2 touch ${STAMPS}/$1.fetch fi } @@ -167,12 +172,24 @@ function log { # Unpack an archive function unpack { log Unpacking $* - if [ -f ${SOURCES}/$1.tar.gz ]; - then - ${TAR} xfz${TARFLAGS} ${SOURCES}/$1.tar.gz - else - ${TAR} xfj${TARFLAGS} ${SOURCES}/$1.tar.bz2 - fi + # Use 'auto' mode decompression. Replace with a switch if tar doesn't support -a + ARCHIVE=$(ls ${SOURCES}/$1.tar.*) + case ${ARCHIVE} in + *.bz2) + echo "archive type bz2" + TYPE=j + ;; + *.gz) + echo "archive type gz" + TYPE=z + ;; + *) + echo "Unknown archive type of $1" + echo ${ARCHIVE} + exit 1 + ;; + esac + ${TAR} xf${TYPE}${TARFLAGS} ${SOURCES}/$1.tar.* } # Install a build @@ -191,6 +208,20 @@ fetch ${GCC} ${GCCURL} fetch ${NEWLIB} ftp://sources.redhat.com/pub/newlib/${NEWLIB}.tar.gz fetch ${GDB} http://ftp.gnu.org/gnu/gdb/${GDB}.tar.bz2 +if [ ${OOCD_EN} != 0 ]; then +if [ ! -e openocd-${OOCD}.tar.bz2 ]; then + log "Cloning OpenOCD sources..." + git clone git://openocd.git.sourceforge.net/gitroot/openocd/openocd openocd-${OOCD} + cd openocd-${OOCD} + ./bootstrap + cd .. + tar cfvj openocd-${OOCD}.tar.bz2 openocd-${OOCD} + #git archive --format=tar --prefix=openocd-${OOCD}/ ${OOCD} | \ + # bzip2 --stdout > ../openocd-${OOCD}.tar.bz2 + rm -rf openocd-${OOCD} +fi +fi + if [ ${LIBSTM32_EN} != 0 ]; then if [ ! -e libcmsis-${LIBCMSIS}.tar.bz2 ]; then log "Cloning libcmsis sources..." @@ -267,7 +298,7 @@ if [ ! -e ${STAMPS}/${GCC}-boot.build ]; then unpack ${GCC} boot cd build log "Configuring ${GCC}-boot" - ../${GCC}/configure --target=${TARGET} \ + ../${GCCDIR}/configure --target=${TARGET} \ --prefix=${PREFIX} \ --enable-interwork \ --enable-multilib \ @@ -287,7 +318,7 @@ if [ ! -e ${STAMPS}/${GCC}-boot.build ]; then cd .. log "Cleaning up ${GCC}-boot" touch ${STAMPS}/${GCC}-boot.build - rm -rf build/* ${GCC} + rm -rf build/* ${GCCDIR} fi if [ ! -e ${STAMPS}/${NEWLIB}.build ]; then @@ -302,9 +333,10 @@ if [ ! -e ${STAMPS}/${NEWLIB}.build ]; then --with-gnu-ld \ --disable-nls \ --disable-werror \ - --disable-newlib-supplied-syscalls + --disable-newlib-supplied-syscalls \ + --with-float=soft log "Building ${NEWLIB}" - make ${MAKEFLAGS} + make ${MAKEFLAGS} CFLAGS_FOR_TARGET="-msoft-float" CCASFLAGS="-msoft-float" install ${NEWLIB} install cd .. log "Cleaning up ${NEWLIB}" @@ -317,7 +349,7 @@ if [ ! -e ${STAMPS}/${GCC}.build ]; then unpack ${GCC} cd build log "Configuring ${GCC}" - ../${GCC}/configure --target=${TARGET} \ + ../${GCCDIR}/configure --target=${TARGET} \ --prefix=${PREFIX} \ --enable-interwork \ --enable-multilib \ @@ -336,7 +368,7 @@ if [ ! -e ${STAMPS}/${GCC}.build ]; then cd .. log "Cleaning up ${GCC}" touch ${STAMPS}/${GCC}.build - rm -rf build/* ${GCC} + rm -rf build/* ${GCCDIR} fi if [ ! -e ${STAMPS}/${GDB}.build ]; then @@ -358,8 +390,43 @@ if [ ! -e ${STAMPS}/${GDB}.build ]; then rm -rf build/* ${GDB} fi +if [ ${OOCD_EN} != 0 ]; then +if [ ! -e ${STAMPS}/openocd-${OOCD}.build ]; then + unpack openocd-${OOCD} + cd build + log "Configuring openocd-${OOCD}" + CFLAGS="${CFLAGS} ${OOCD_CFLAGS}" \ + LDFLAGS="${LDFLAGS} ${OOCD_LDFLAGS}" \ + ../openocd-${OOCD}/configure --enable-maintainer-mode \ + --prefix=${PREFIX} \ + --enable-dummy \ + --enable-parport \ + --enable-ft2232_libftdi \ + --enable-usb_blaster_libftdi \ + --enable-amtjtagaccel \ + --enable-zy1000 \ + --enable-ep93xx \ + --enable-at91rm9200 \ + --enable-gw16012 \ + --enable-presto_libftdi \ + --enable-usbprog \ + --enable-jlink \ + --enable-vsllink \ + --enable-rlink \ + --enable-arm-jtag-ew \ + --enable-buspirate + log "Building openocd-${OOCD}" + make ${MAKEFLAGS} + install openocd-${OOCD} install + cd .. + log "Cleaning up openocd-${OOCD}" + touch ${STAMPS}/openocd-${OOCD}.build + rm -rf build/* ${OOCD} +fi +fi + if [ ${LIBSTM32_EN} != 0 ]; then -if [ ! -e .libcmsis-${LIBCMSIS}.build ]; then +if [ ! -e ${STAMPS}/libcmsis-${LIBCMSIS}.build ]; then unpack libcmsis-${LIBCMSIS} cd libcmsis-${LIBCMSIS} log "Building libcmsis-${LIBCMSIS}" @@ -367,11 +434,11 @@ if [ ! -e .libcmsis-${LIBCMSIS}.build ]; then install libcmsis-${LIBCMSIS} arch_prefix=${TARGET} prefix=${PREFIX} install cd .. log "Cleaning up libcmsis-${LIBCMSIS}" - touch .libcmsis-${LIBCMSIS}.build + touch ${STAMPS}/libcmsis-${LIBCMSIS}.build rm -rf libcmsis-${LIBCMSIS} fi -if [ ! -e .libstm32-${LIBSTM32}.build ]; then +if [ ! -e ${STAMPS}/libstm32-${LIBSTM32}.build ]; then unpack libstm32-${LIBSTM32} cd libstm32-${LIBSTM32} log "Building libstm32-${LIBSTM32}" @@ -379,11 +446,11 @@ if [ ! -e .libstm32-${LIBSTM32}.build ]; then install libstm32-${LIBSTM32} arch_prefix=${TARGET} prefix=${PREFIX} install cd .. log "Cleaning up libstm32-${LIBSTM32}" - touch .libstm32-${LIBSTM32}.build + touch ${STAMPS}/libstm32-${LIBSTM32}.build rm -rf libstm32-${LIBSTM32} fi -if [ ! -e .libstm32usb-${LIBSTM32USB}.build ]; then +if [ ! -e ${STAMPS}/libstm32usb-${LIBSTM32USB}.build ]; then unpack libstm32usb-${LIBSTM32USB} cd libstm32usb-${LIBSTM32USB} log "Building libstm32usb-${LIBSTM32USB}" @@ -391,12 +458,13 @@ if [ ! -e .libstm32usb-${LIBSTM32USB}.build ]; then install libstm32usb-${LIBSTM32USB} arch_prefix=${TARGET} prefix=${PREFIX} install cd .. log "Cleaning up libstm32usb-${LIBSTM32USB}" - touch .libstm32usb-${LIBSTM32USB}.build + touch ${STAMPS}/libstm32usb-${LIBSTM32USB}.build rm -rf libstm32usb-${LIBSTM32USB} fi fi if [ $LIBOPENSTM32_EN != 0 ]; then +if [ ! -e ${STAMPS}/libopenstm32-${LIBOPENSTM32}.build ]; then unpack libopenstm32-${LIBOPENSTM32} cd libopenstm32-${LIBOPENSTM32} log "Building libopenstm32-${LIBOPENSTM32}" @@ -404,6 +472,7 @@ if [ $LIBOPENSTM32_EN != 0 ]; then install libopenstm32-${LIBOPENSTM32} PREFIX=${TARGET} DESTDIR=${PREFIX} install cd .. log "Cleaning up libopenstm32-${LIBOPENSTM32}" - touch .libopenstm32-${LIBOPENSTM32}.build + touch ${STAMPS}/libopenstm32-${LIBOPENSTM32}.build rm -rf libopenstm32-${LIBOPENSTM32} fi +fi