X-Git-Url: http://wien.tomnetworks.com/gitweb/?a=blobdiff_plain;f=summon-arm-toolchain;h=7cb10a51724bbf2884042e632d1c131d7a89f3ef;hb=489cef87de9710f56d804b19dc9ec5ae5c57001b;hp=b7314cfc508ec13f1707119c416a679801608789;hpb=01f0afad95cd988fd30d280c113018f115a69f9f;p=summon-arm-toolchain.git diff --git a/summon-arm-toolchain b/summon-arm-toolchain index b7314cf..7cb10a5 100755 --- a/summon-arm-toolchain +++ b/summon-arm-toolchain @@ -2,14 +2,9 @@ # Written by Uwe Hermann , released as public domain. # Modified by Piotr Esden-Tempski , released as public domain. -# -# Requirements (example is for Debian, replace package names as needed): -# -# apt-get install flex bison libgmp3-dev libmpfr-dev libncurses5-dev \ -# libmpc-dev autoconf texinfo build-essential -# -# Or on Ubuntu Maverick give `apt-get build-dep gcc-4.5` a try. -# +# adapted for r0ket development by +# Matthias Rampke +# requires Homebrew # Stop if any command fails set -e @@ -18,21 +13,23 @@ set -e # Settings section # You probably want to customize those ############################################################################## -TARGET=arm-none-eabi # Or: TARGET=arm-elf -PREFIX=${HOME}/sat # Install location of your final toolchain -DARWIN_OPT_PATH=/opt/local # Path in which MacPorts or Fink is installed +TARGET=arm-eabi # Or: TARGET=arm-elf +PREFIX=${HOME}/arm # Install location of your final toolchain +PARALLEL= # Or: PARALLEL="-j 5" for 4 CPUs # Set to 'sudo' if you need superuser privileges while installing -SUDO= +SUDO='' # Set to 1 to be quieter while running QUIET=0 # Set to 1 to use linaro gcc instead of the FSF gcc -USE_LINARO=0 +USE_LINARO=1 +# Set to 1 to enable building of OpenOCD +OOCD_EN=0 # Set to 1 to build libstm32 provided by ST LIBSTM32_EN=0 # Set to 1 to build libopenstm32 an open source library for stm32 -LIBOPENSTM32_EN=0 +LIBOPENSTM32_EN=1 # Make the gcc default to Cortex-M3 -DEFAULT_TO_CORTEX_M3=0 +DEFAULT_TO_CORTEX_M3=1 ############################################################################## # Version and download url settings section @@ -41,18 +38,21 @@ if [ ${USE_LINARO} == 0 ] ; then # For FSF GCC: GCCVERSION=4.5.1 GCC=gcc-${GCCVERSION} + GCCDIR=${GCC} GCCURL=http://ftp.gnu.org/gnu/gcc/${GCC}/${GCC}.tar.gz else # For the Linaro GCC: - GCCRELEASE=4.5-2010.11-0 - GCCVERSION=4.5-2010.11-1 - GCC=gcc-linaro-${GCCVERSION} - GCCURL=http://launchpad.net/gcc-linaro/4.5/${GCCRELEASE}/+download/${GCC}.tar.bz2 + GCCRELEASE=4.6-2011.07 + GCCVERSION=4.6-2011.07-0 + GCC=gcc-linaro-${GCCRELEASE} + GCCDIR=gcc-linaro-${GCCVERSION} + GCCURL=http://launchpad.net/gcc-linaro/4.6/${GCCRELEASE}/+download/gcc-linaro-${GCCRELEASE}.tar.bz2 fi -BINUTILS=binutils-2.20 -NEWLIB=newlib-1.18.0 -GDB=gdb-7.2 +BINUTILS=binutils-2.21 +NEWLIB=newlib-1.19.0 +GDB=gdb-7.3 +OOCD=master LIBCMSIS=v1.10-2 LIBSTM32=v3.0.0-1 LIBSTM32USB=v3.0.1-1 @@ -116,11 +116,28 @@ case "$(uname)" in ;; Darwin) echo "Found Darwin OS." - GCCFLAGS="${GCCFLAGS} \ - --with-gmp=${DARWIN_OPT_PATH} \ - --with-mpfr=${DARWIN_OPT_PATH} \ - --with-mpc=${DARWIN_OPT_PATH} \ - -with-libiconv-prefix=${DARWIN_OPT_PATH}" + + # darwin dependencies + DARWINDEPS="wget mpfr libmpc gmp" + DARWINDEPSCOUNT=4 + + echo "Installing dependencies ..." + if ! which brew > /dev/null; then + echo "Homebrew not installed." + else + brew install ${DARWINDEPS} | (grep -v '^Warning: Formula already installed: ' || true) + fi + + GCCFLAGS="${GCCFLAGS} \ + --with-gmp=$(brew --prefix gmp) \ + --with-mpfr=$(brew --prefix mpfr) \ + --with-mpc=$(brew --prefix mpc) + -with-libiconv-prefix=$(brew --prefix libiconv)" + + TAR=gnutar + + OOCD_CFLAGS="-m32 -I/opt/mine/include -I/opt/local/include" + OOCD_LDFLAGS="-L/opt/mine/lib -L/opt/local/lib" ;; CYGWIN*) echo "Found CygWin that means Windows most likely." @@ -140,7 +157,7 @@ esac function fetch { if [ ! -e ${STAMPS}/$1.fetch ]; then log "Downloading $1 sources..." - wget -c --no-passive-ftp $2 + wget -c $2 touch ${STAMPS}/$1.fetch fi } @@ -191,6 +208,20 @@ fetch ${GCC} ${GCCURL} fetch ${NEWLIB} ftp://sources.redhat.com/pub/newlib/${NEWLIB}.tar.gz fetch ${GDB} http://ftp.gnu.org/gnu/gdb/${GDB}.tar.bz2 +if [ ${OOCD_EN} != 0 ]; then +if [ ! -e openocd-${OOCD}.tar.bz2 ]; then + log "Cloning OpenOCD sources..." + git clone git://openocd.git.sourceforge.net/gitroot/openocd/openocd openocd-${OOCD} + cd openocd-${OOCD} + ./bootstrap + cd .. + tar cfvj openocd-${OOCD}.tar.bz2 openocd-${OOCD} + #git archive --format=tar --prefix=openocd-${OOCD}/ ${OOCD} | \ + # bzip2 --stdout > ../openocd-${OOCD}.tar.bz2 + rm -rf openocd-${OOCD} +fi +fi + if [ ${LIBSTM32_EN} != 0 ]; then if [ ! -e libcmsis-${LIBCMSIS}.tar.bz2 ]; then log "Cloning libcmsis sources..." @@ -267,7 +298,7 @@ if [ ! -e ${STAMPS}/${GCC}-boot.build ]; then unpack ${GCC} boot cd build log "Configuring ${GCC}-boot" - ../${GCC}/configure --target=${TARGET} \ + ../${GCCDIR}/configure --target=${TARGET} \ --prefix=${PREFIX} \ --enable-interwork \ --enable-multilib \ @@ -287,7 +318,7 @@ if [ ! -e ${STAMPS}/${GCC}-boot.build ]; then cd .. log "Cleaning up ${GCC}-boot" touch ${STAMPS}/${GCC}-boot.build - rm -rf build/* ${GCC} + rm -rf build/* ${GCCDIR} fi if [ ! -e ${STAMPS}/${NEWLIB}.build ]; then @@ -318,7 +349,7 @@ if [ ! -e ${STAMPS}/${GCC}.build ]; then unpack ${GCC} cd build log "Configuring ${GCC}" - ../${GCC}/configure --target=${TARGET} \ + ../${GCCDIR}/configure --target=${TARGET} \ --prefix=${PREFIX} \ --enable-interwork \ --enable-multilib \ @@ -337,7 +368,7 @@ if [ ! -e ${STAMPS}/${GCC}.build ]; then cd .. log "Cleaning up ${GCC}" touch ${STAMPS}/${GCC}.build - rm -rf build/* ${GCC} + rm -rf build/* ${GCCDIR} fi if [ ! -e ${STAMPS}/${GDB}.build ]; then @@ -359,6 +390,41 @@ if [ ! -e ${STAMPS}/${GDB}.build ]; then rm -rf build/* ${GDB} fi +if [ ${OOCD_EN} != 0 ]; then +if [ ! -e ${STAMPS}/openocd-${OOCD}.build ]; then + unpack openocd-${OOCD} + cd build + log "Configuring openocd-${OOCD}" + CFLAGS="${CFLAGS} ${OOCD_CFLAGS}" \ + LDFLAGS="${LDFLAGS} ${OOCD_LDFLAGS}" \ + ../openocd-${OOCD}/configure --enable-maintainer-mode \ + --prefix=${PREFIX} \ + --enable-dummy \ + --enable-parport \ + --enable-ft2232_libftdi \ + --enable-usb_blaster_libftdi \ + --enable-amtjtagaccel \ + --enable-zy1000 \ + --enable-ep93xx \ + --enable-at91rm9200 \ + --enable-gw16012 \ + --enable-presto_libftdi \ + --enable-usbprog \ + --enable-jlink \ + --enable-vsllink \ + --enable-rlink \ + --enable-arm-jtag-ew \ + --enable-buspirate + log "Building openocd-${OOCD}" + make ${MAKEFLAGS} + install openocd-${OOCD} install + cd .. + log "Cleaning up openocd-${OOCD}" + touch ${STAMPS}/openocd-${OOCD}.build + rm -rf build/* ${OOCD} +fi +fi + if [ ${LIBSTM32_EN} != 0 ]; then if [ ! -e ${STAMPS}/libcmsis-${LIBCMSIS}.build ]; then unpack libcmsis-${LIBCMSIS}