X-Git-Url: http://wien.tomnetworks.com/gitweb/?a=blobdiff_plain;f=summon-arm-toolchain;h=3c43ef4f336020ef08a6de9fe2f995e8eac88be3;hb=fc95f7b57d33b4069374e7d8e6d6f9e9af428d46;hp=97c2508a2bbda6c54e45907e4501f1f2bac1d253;hpb=d4b27e83ab7676613d088e2e43461c9f49f36e74;p=summon-arm-toolchain.git diff --git a/summon-arm-toolchain b/summon-arm-toolchain index 97c2508..3c43ef4 100755 --- a/summon-arm-toolchain +++ b/summon-arm-toolchain @@ -2,14 +2,9 @@ # Written by Uwe Hermann , released as public domain. # Modified by Piotr Esden-Tempski , released as public domain. -# -# Requirements (example is for Debian, replace package names as needed): -# -# apt-get install flex bison libgmp3-dev libmpfr-dev libncurses5-dev \ -# libmpc-dev autoconf texinfo build-essential -# -# Or on Ubuntu Maverick give `apt-get build-dep gcc-4.5` a try. -# +# adapted for r0ket development by +# Matthias Rampke +# requires Homebrew # Stop if any command fails set -e @@ -18,22 +13,24 @@ set -e # Settings section # You probably want to customize those ############################################################################## -TARGET=arm-elf # Or: TARGET=arm-elf -PREFIX=/arm # Install location of your final toolchain +TARGET=arm-eabi # Or: TARGET=arm-elf +[ -z $PREFIX ] && PREFIX=${HOME}/arm # Install location of your final toolchain +[ -z $WORKDIR ] && WORKDIR=$PREFIX/work #temporary directory PARALLEL= # Or: PARALLEL="-j 5" for 4 CPUs -DARWIN_OPT_PATH=/opt/local # Path in which MacPorts or Fink is installed # Set to 'sudo' if you need superuser privileges while installing -SUDO='sudo' +SUDO='' # Set to 1 to be quieter while running QUIET=0 # Set to 1 to use linaro gcc instead of the FSF gcc -USE_LINARO=0 +USE_LINARO=1 +# Set to 1 to enable building of OpenOCD +OOCD_EN=0 # Set to 1 to build libstm32 provided by ST LIBSTM32_EN=0 # Set to 1 to build libopenstm32 an open source library for stm32 -LIBOPENSTM32_EN=0 +LIBOPENSTM32_EN=1 # Make the gcc default to Cortex-M3 -DEFAULT_TO_CORTEX_M3=0 +DEFAULT_TO_CORTEX_M3=1 ############################################################################## # Version and download url settings section @@ -42,17 +39,21 @@ if [ ${USE_LINARO} == 0 ] ; then # For FSF GCC: GCCVERSION=4.5.1 GCC=gcc-${GCCVERSION} + GCCDIR=${GCC} GCCURL=http://ftp.gnu.org/gnu/gcc/${GCC}/${GCC}.tar.gz else # For the Linaro GCC: - GCCVERSION=4.5-2010.08-1 - GCC=gcc-linaro-${GCCVERSION} - GCCURL=http://launchpad.net/gcc-linaro/4.5/${GCCVERSION}/+download/${GCC}.tar.gz + GCCRELEASE=4.6-2011.07 + GCCVERSION=4.6-2011.07-0 + GCC=gcc-linaro-${GCCRELEASE} + GCCDIR=gcc-linaro-${GCCVERSION} + GCCURL=http://launchpad.net/gcc-linaro/4.6/${GCCRELEASE}/+download/gcc-linaro-${GCCRELEASE}.tar.bz2 fi -BINUTILS=binutils-2.20 -NEWLIB=newlib-1.18.0 -GDB=gdb-7.2 +BINUTILS=binutils-2.21 +NEWLIB=newlib-1.19.0 +GDB=gdb-7.3 +OOCD=master LIBCMSIS=v1.10-2 LIBSTM32=v3.0.0-1 LIBSTM32USB=v3.0.1-1 @@ -62,6 +63,14 @@ LIBOPENSTM32=master # Flags section ############################################################################## +if which getconf > /dev/null; then + CPUS=$(getconf _NPROCESSORS_ONLN) +else + CPUS=1 +fi +PARALLEL=-j$((CPUS + 1)) +echo "${CPUS} cpu's detected running make with '${PARALLEL}' flag" + GDBFLAGS= BINUTILFLAGS= @@ -69,7 +78,7 @@ if [ ${DEFAULT_TO_CORTEX_M3} == 0 ] ; then GCCFLAGS= else # To default to the Cortex-M3: - GCCFLAGS="--with-arch=armv7-m --with-mode=thumb" + GCCFLAGS="--with-arch=armv7-m --with-mode=thumb --with-float=soft" fi # Pull in the local configuration, if any @@ -87,57 +96,53 @@ fi export PATH="${PREFIX}/bin:${PATH}" -SUMMON_DIR=$(pwd) +SUMMON_DIR=${WORKDIR} SOURCES=${SUMMON_DIR}/sources STAMPS=${SUMMON_DIR}/stamps + +############################################################################## +# Tool section +############################################################################## +TAR=tar + ############################################################################## # OS and Tooldetection section -# Detects which tools to use +# Detects which tools and flags to use ############################################################################## case "$(uname)" in Linux) echo "Found Linux OS." - TAR=tar ;; Darwin) echo "Found Darwin OS." - GCCFLAGS="${GCCFLAGS} \ - --with-gmp=${DARWIN_OPT_PATH} \ - --with-mpfr=${DARWIN_OPT_PATH} \ - --with-mpc=${DARWIN_OPT_PATH} \ - -with-libiconv-prefix=${DARWIN_OPT_PATH}" - if ! which gnutar > /dev/null ; then - echo "ERROR: GNU tar not found! (try 'sudo port install gnutar')" - exit 1 - else - echo "GNU tar found!" - TAR=gnutar - fi - - echo "Attempting to automatically check if common depencies are installed on your system" - if ! which port > /dev/null; then - echo "MacPorts not installed, could not check for requirements automatically" + # darwin dependencies + DARWINDEPS="wget mpfr libmpc gmp" + DARWINDEPSCOUNT=4 + + echo "Installing dependencies ..." + if ! which brew > /dev/null; then + echo "Homebrew not installed." else - pc=`port installed mpfr libmpc gmp | wc -l | tr -d " "` - if [ ${pc} -lt 4 ]; - then - echo "Something is missing, do you want to install everything needed?" - echo "(You need super user rights to do this.)" - - if [ read = "y" || read = "yes" ]; - then - sudo port install mpfr libmpc gmp - fi - else - echo "Found mpfr, libmpc and gmp. Proceeding..." - fi + brew install ${DARWINDEPS} | (grep -v '^Warning: Formula already installed: ' || true) fi - ;; + GCCFLAGS="${GCCFLAGS} \ + --with-gmp=$(brew --prefix gmp) \ + --with-mpfr=$(brew --prefix mpfr) \ + --with-mpc=$(brew --prefix mpc) + -with-libiconv-prefix=$(brew --prefix libiconv)" + TAR=gnutar + + OOCD_CFLAGS="-m32 -I/opt/mine/include -I/opt/local/include" + OOCD_LDFLAGS="-L/opt/mine/lib -L/opt/local/lib" + ;; + CYGWIN*) + echo "Found CygWin that means Windows most likely." + ;; *) echo "Found unknown OS. Aborting!" exit 1 @@ -153,7 +158,7 @@ esac function fetch { if [ ! -e ${STAMPS}/$1.fetch ]; then log "Downloading $1 sources..." - wget -c --no-passive-ftp $2 + wget -c $2 touch ${STAMPS}/$1.fetch fi } @@ -168,12 +173,24 @@ function log { # Unpack an archive function unpack { log Unpacking $* - if [ -f ${SOURCES}/$1.tar.gz ]; - then - ${TAR} xfz${TARFLAGS} ${SOURCES}/$1.tar.gz - else - ${TAR} xfj${TARFLAGS} ${SOURCES}/$1.tar.bz2 - fi + # Use 'auto' mode decompression. Replace with a switch if tar doesn't support -a + ARCHIVE=$(ls ${SOURCES}/$1.tar.*) + case ${ARCHIVE} in + *.bz2) + echo "archive type bz2" + TYPE=j + ;; + *.gz) + echo "archive type gz" + TYPE=z + ;; + *) + echo "Unknown archive type of $1" + echo ${ARCHIVE} + exit 1 + ;; + esac + ${TAR} xf${TYPE}${TARFLAGS} ${SOURCES}/$1.tar.* } # Install a build @@ -192,6 +209,20 @@ fetch ${GCC} ${GCCURL} fetch ${NEWLIB} ftp://sources.redhat.com/pub/newlib/${NEWLIB}.tar.gz fetch ${GDB} http://ftp.gnu.org/gnu/gdb/${GDB}.tar.bz2 +if [ ${OOCD_EN} != 0 ]; then +if [ ! -e openocd-${OOCD}.tar.bz2 ]; then + log "Cloning OpenOCD sources..." + git clone git://openocd.git.sourceforge.net/gitroot/openocd/openocd openocd-${OOCD} + cd openocd-${OOCD} + ./bootstrap + cd .. + tar cfvj openocd-${OOCD}.tar.bz2 openocd-${OOCD} + #git archive --format=tar --prefix=openocd-${OOCD}/ ${OOCD} | \ + # bzip2 --stdout > ../openocd-${OOCD}.tar.bz2 + rm -rf openocd-${OOCD} +fi +fi + if [ ${LIBSTM32_EN} != 0 ]; then if [ ! -e libcmsis-${LIBCMSIS}.tar.bz2 ]; then log "Cloning libcmsis sources..." @@ -236,6 +267,7 @@ if [ ! -e libopenstm32-${LIBOPENSTM32}.tar.bz2 ]; then fi fi +mkdir -p ${SUMMON_DIR} cd ${SUMMON_DIR} if [ ! -e build ]; then @@ -268,7 +300,7 @@ if [ ! -e ${STAMPS}/${GCC}-boot.build ]; then unpack ${GCC} boot cd build log "Configuring ${GCC}-boot" - ../${GCC}/configure --target=${TARGET} \ + ../${GCCDIR}/configure --target=${TARGET} \ --prefix=${PREFIX} \ --enable-interwork \ --enable-multilib \ @@ -288,7 +320,7 @@ if [ ! -e ${STAMPS}/${GCC}-boot.build ]; then cd .. log "Cleaning up ${GCC}-boot" touch ${STAMPS}/${GCC}-boot.build - rm -rf build/* ${GCC} + rm -rf build/* ${GCCDIR} fi if [ ! -e ${STAMPS}/${NEWLIB}.build ]; then @@ -303,9 +335,10 @@ if [ ! -e ${STAMPS}/${NEWLIB}.build ]; then --with-gnu-ld \ --disable-nls \ --disable-werror \ - --disable-newlib-supplied-syscalls + --disable-newlib-supplied-syscalls \ + --with-float=soft log "Building ${NEWLIB}" - make ${MAKEFLAGS} + make ${MAKEFLAGS} CFLAGS_FOR_TARGET="-msoft-float" CCASFLAGS="-msoft-float" install ${NEWLIB} install cd .. log "Cleaning up ${NEWLIB}" @@ -318,7 +351,7 @@ if [ ! -e ${STAMPS}/${GCC}.build ]; then unpack ${GCC} cd build log "Configuring ${GCC}" - ../${GCC}/configure --target=${TARGET} \ + ../${GCCDIR}/configure --target=${TARGET} \ --prefix=${PREFIX} \ --enable-interwork \ --enable-multilib \ @@ -337,7 +370,7 @@ if [ ! -e ${STAMPS}/${GCC}.build ]; then cd .. log "Cleaning up ${GCC}" touch ${STAMPS}/${GCC}.build - rm -rf build/* ${GCC} + rm -rf build/* ${GCCDIR} fi if [ ! -e ${STAMPS}/${GDB}.build ]; then @@ -359,8 +392,43 @@ if [ ! -e ${STAMPS}/${GDB}.build ]; then rm -rf build/* ${GDB} fi +if [ ${OOCD_EN} != 0 ]; then +if [ ! -e ${STAMPS}/openocd-${OOCD}.build ]; then + unpack openocd-${OOCD} + cd build + log "Configuring openocd-${OOCD}" + CFLAGS="${CFLAGS} ${OOCD_CFLAGS}" \ + LDFLAGS="${LDFLAGS} ${OOCD_LDFLAGS}" \ + ../openocd-${OOCD}/configure --enable-maintainer-mode \ + --prefix=${PREFIX} \ + --enable-dummy \ + --enable-parport \ + --enable-ft2232_libftdi \ + --enable-usb_blaster_libftdi \ + --enable-amtjtagaccel \ + --enable-zy1000 \ + --enable-ep93xx \ + --enable-at91rm9200 \ + --enable-gw16012 \ + --enable-presto_libftdi \ + --enable-usbprog \ + --enable-jlink \ + --enable-vsllink \ + --enable-rlink \ + --enable-arm-jtag-ew \ + --enable-buspirate + log "Building openocd-${OOCD}" + make ${MAKEFLAGS} + install openocd-${OOCD} install + cd .. + log "Cleaning up openocd-${OOCD}" + touch ${STAMPS}/openocd-${OOCD}.build + rm -rf build/* ${OOCD} +fi +fi + if [ ${LIBSTM32_EN} != 0 ]; then -if [ ! -e .libcmsis-${LIBCMSIS}.build ]; then +if [ ! -e ${STAMPS}/libcmsis-${LIBCMSIS}.build ]; then unpack libcmsis-${LIBCMSIS} cd libcmsis-${LIBCMSIS} log "Building libcmsis-${LIBCMSIS}" @@ -368,11 +436,11 @@ if [ ! -e .libcmsis-${LIBCMSIS}.build ]; then install libcmsis-${LIBCMSIS} arch_prefix=${TARGET} prefix=${PREFIX} install cd .. log "Cleaning up libcmsis-${LIBCMSIS}" - touch .libcmsis-${LIBCMSIS}.build + touch ${STAMPS}/libcmsis-${LIBCMSIS}.build rm -rf libcmsis-${LIBCMSIS} fi -if [ ! -e .libstm32-${LIBSTM32}.build ]; then +if [ ! -e ${STAMPS}/libstm32-${LIBSTM32}.build ]; then unpack libstm32-${LIBSTM32} cd libstm32-${LIBSTM32} log "Building libstm32-${LIBSTM32}" @@ -380,11 +448,11 @@ if [ ! -e .libstm32-${LIBSTM32}.build ]; then install libstm32-${LIBSTM32} arch_prefix=${TARGET} prefix=${PREFIX} install cd .. log "Cleaning up libstm32-${LIBSTM32}" - touch .libstm32-${LIBSTM32}.build + touch ${STAMPS}/libstm32-${LIBSTM32}.build rm -rf libstm32-${LIBSTM32} fi -if [ ! -e .libstm32usb-${LIBSTM32USB}.build ]; then +if [ ! -e ${STAMPS}/libstm32usb-${LIBSTM32USB}.build ]; then unpack libstm32usb-${LIBSTM32USB} cd libstm32usb-${LIBSTM32USB} log "Building libstm32usb-${LIBSTM32USB}" @@ -392,12 +460,13 @@ if [ ! -e .libstm32usb-${LIBSTM32USB}.build ]; then install libstm32usb-${LIBSTM32USB} arch_prefix=${TARGET} prefix=${PREFIX} install cd .. log "Cleaning up libstm32usb-${LIBSTM32USB}" - touch .libstm32usb-${LIBSTM32USB}.build + touch ${STAMPS}/libstm32usb-${LIBSTM32USB}.build rm -rf libstm32usb-${LIBSTM32USB} fi fi if [ $LIBOPENSTM32_EN != 0 ]; then +if [ ! -e ${STAMPS}/libopenstm32-${LIBOPENSTM32}.build ]; then unpack libopenstm32-${LIBOPENSTM32} cd libopenstm32-${LIBOPENSTM32} log "Building libopenstm32-${LIBOPENSTM32}" @@ -405,6 +474,7 @@ if [ $LIBOPENSTM32_EN != 0 ]; then install libopenstm32-${LIBOPENSTM32} PREFIX=${TARGET} DESTDIR=${PREFIX} install cd .. log "Cleaning up libopenstm32-${LIBOPENSTM32}" - touch .libopenstm32-${LIBOPENSTM32}.build + touch ${STAMPS}/libopenstm32-${LIBOPENSTM32}.build rm -rf libopenstm32-${LIBOPENSTM32} fi +fi