X-Git-Url: http://wien.tomnetworks.com/gitweb/?a=blobdiff_plain;f=summon-arm-toolchain;h=31c7991b350d21f9f822eaa73307473c35ba5209;hb=a306cfd7c432038525ae68776a213ed8069769ab;hp=d77ac17b673df1bcd6eaaaa3073947a1e21ca2da;hpb=32295df2b482209718ed3dbdc335c6357ce283ab;p=summon-arm-toolchain.git diff --git a/summon-arm-toolchain b/summon-arm-toolchain index d77ac17..31c7991 100755 --- a/summon-arm-toolchain +++ b/summon-arm-toolchain @@ -1,117 +1,200 @@ -#!/bin/bash +#!/bin/sh # Written by Uwe Hermann , released as public domain. # Modified by Piotr Esden-Tempski , released as public domain. -# -# Requirements (example is for Debian, replace package names as needed): -# -# apt-get install flex bison libgmp3-dev libmpfr-dev libncurses5-dev \ -# libmpc-dev autoconf texinfo build-essential -# +# adapted for r0ket development by +# Matthias Rampke +# requires Homebrew +# Stop if any command fails +set -e + +############################################################################## +# Settings section +# You probably want to customize those +############################################################################## TARGET=arm-none-eabi # Or: TARGET=arm-elf -PREFIX=${HOME}/arm-none-eabi # Install location of your final toolchain -PARALLEL="" # Or: PARALLEL="-j 5" for 4 CPUs -DARWIN_OPT_PATH=/opt/local # Path in which MacPorts or Fink is installed - -BINUTILS=binutils-2.20 -GCC=gcc-4.5.1 -NEWLIB=newlib-1.18.0 -GDB=gdb-7.2 -LIBCMSIS=v1.10-2 -LIBSTM32=v3.0.0-1 -LIBSTM32USB=v3.0.1-1 -LIBOPENSTM32=master -LIBSTM32_EN=0 -LIBOPENSTM32_EN=0 - -SUMMON_DIR=$(pwd) -SOURCES=${SUMMON_DIR}/sources +[ -z $PREFIX ] && PREFIX=${HOME}/arm # Install location of your final toolchain +[ -z $WORKDIR ] && WORKDIR=$PREFIX/work #temporary directory +PARALLEL= # Or: PARALLEL="-j 5" for 4 CPUs +# Set to 'sudo' if you need superuser privileges while installing +SUDO='' +# Set to 1 to be quieter while running +QUIET=0 +# Set to 1 to use linaro gcc instead of the FSF gcc +USE_LINARO=0 +# Set to 1 to enable C++ +USE_CPP=0 +# Make the gcc default to Cortex-M3 +DEFAULT_TO_CORTEX_M3=1 -export PATH="${PREFIX}/bin:${PATH}" +############################################################################## +# Version and download url settings section +############################################################################## +if [ ${USE_LINARO} = 0 ] ; then + # For FSF GCC: + GCCVERSION=4.6.1 + if [ ${USE_CPP} = 0 ]; then + GCC=gcc-core-${GCCVERSION} + GCCDIR=gcc-${GCCVERSION} + else + GCC=gcc-${GCCVERSION} + GCCDIR=${GCC} + fi + GCCURL=http://ftp.gnu.org/gnu/gcc/${GCCDIR}/${GCC}.tar.bz2 +else + # For the Linaro GCC: + GCCRELEASE=4.6-2011.07 + GCCVERSION=4.6-2011.07-0 + GCC=gcc-linaro-${GCCRELEASE} + GCCDIR=gcc-linaro-${GCCVERSION} + GCCURL=http://launchpad.net/gcc-linaro/4.6/${GCCRELEASE}/+download/gcc-linaro-${GCCRELEASE}.tar.bz2 +fi + +BINUTILS=binutils-2.21 +NEWLIB=newlib-1.19.0 +GDB=gdb-7.3 +GMP=gmp-5.0.2 +MPFR=mpfr-3.0.1 +MPC=mpc-0.9 + +############################################################################## +# Flags section +############################################################################## + +if which getconf > /dev/null; then + CPUS=$(getconf _NPROCESSORS_ONLN) +else + CPUS=1 +fi +PARALLEL=-j$((CPUS + 1)) +echo "${CPUS} cpu's detected running make with '${PARALLEL}' flag" -GCCFLAGS= GDBFLAGS= BINUTILFLAGS= -case "$(uname)" in - Linux) - echo "Found Linux OS." - ;; - Darwin) - echo "Found Darwin OS." - GCCFLAGS="--with-gmp=${DARWIN_OPT_PATH} \ - --with-mpfr=${DARWIN_OPT_PATH} \ - --with-mpc=${DARWIN_OPT_PATH} \ - -with-libiconv-prefix=${DARWIN_OPT_PATH}" - ;; - *) - echo "Found unknown OS. Aborting!" - exit 1 - ;; -esac +if [ ${DEFAULT_TO_CORTEX_M3} = 0 ] ; then + GCCFLAGS= +else + # To default to the Cortex-M3: + GCCFLAGS="--with-arch=armv7-m --with-mode=thumb --with-float=soft" +fi -if [ ! -e ${SOURCES} ]; then - mkdir ${SOURCES} +# Pull in the local configuration, if any +if [ -f local.sh ]; then + . ./local.sh fi -cd ${SOURCES} +MAKEFLAGS=${PARALLEL} +TARFLAGS=v -echo "Downloading binutils sources..." -wget -c http://ftp.gnu.org/gnu/binutils/${BINUTILS}.tar.bz2 +if [ ${QUIET} != 0 ]; then + TARFLAGS= + MAKEFLAGS="${MAKEFLAGS} -s" +fi -echo "Downloading gcc sources..." -wget -c http://ftp.gnu.org/gnu/gcc/${GCC}/${GCC}.tar.bz2 +export PATH="${PREFIX}/bin:${PATH}" -echo "Downloading newlib sources..." -wget -c --no-passive-ftp ftp://sources.redhat.com/pub/newlib/${NEWLIB}.tar.gz +SUMMON_DIR=${WORKDIR} +SOURCES=${SUMMON_DIR}/sources +STAMPS=${SUMMON_DIR}/stamps -echo "Downloading gdb sources..." -wget -c http://ftp.gnu.org/gnu/gdb/${GDB}.tar.bz2 -if [ ${LIBSTM32_EN} != 0 ]; then -if [ ! -e libcmsis-${LIBCMSIS}.tar.bz2 ]; then - echo "Cloning libcmsis sources..." - git clone git://git.open-bldc.org/libcmsis.git - cd libcmsis - git archive --format=tar --prefix=libcmsis-${LIBCMSIS}/ ${LIBCMSIS} | \ - bzip2 --stdout > ../libcmsis-${LIBCMSIS}.tar.bz2 - cd .. - rm -rf libcmsis -fi +############################################################################## +# OS and Tooldetection section +# Detects which tools and flags to use +############################################################################## -if [ ! -e libstm32-${LIBSTM32}.tar.bz2 ]; then - echo "Cloning libstm32 sources..." - git clone git://git.open-bldc.org/libstm32.git - cd libstm32 - git archive --format=tar --prefix=libstm32-${LIBSTM32}/ ${LIBSTM32} | \ - bzip2 --stdout > ../libstm32-${LIBSTM32}.tar.bz2 - cd .. - rm -rf libstm32 +# normalized fetching with whatever we can find +if which fetch > /dev/null; then + FETCHCMD="fetch -p" +elif which wget > /dev/null; then + FETCHCMD=wget +elif which curl > /dev/null; then + FETCHCMD="curl -O" +else + FETCHCMD=ftp # the only HTTP client on some BSD fi -if [ ! -e libstm32usb-${LIBSTM32USB}.tar.bz2 ]; then - echo "Cloning libstm32usb sources..." - git clone git://git.open-bldc.org/libstm32usb.git - cd libstm32usb - git archive --format=tar --prefix=libstm32usb-${LIBSTM32USB}/ ${LIBSTM32USB} | \ - bzip2 --stdout > ../libstm32usb-${LIBSTM32USB}.tar.bz2 - cd .. - rm -rf libstm32usb -fi +if [ USE_LINARO = 1 ]; then + if which gnutar > /dev/null; then + TAR=gnutar + elif which gtar > /dev/null; then + TAR=gtar + else # hopefully it understands the GNU format + TAR=tar + fi +else + TAR=tar # use the system tar fi -if [ ${LIBOPENSTM32_EN} != 0 ]; then -if [ ! -e libopenstm32-${LIBOPENSTM32}.tar.bz2 ]; then - echo "Cloning libopenstm32 sources..." - git clone git://libopenstm32.git.sourceforge.net/gitroot/libopenstm32/libopenstm32 - cd libopenstm32 - git archive --format=tar --prefix=libopenstm32-${LIBOPENSTM32}/ ${LIBOPENSTM32} | \ - bzip2 --stdout > ../libopenstm32-${LIBOPENSTM32}.tar.bz2 - cd .. - rm -rf libopenstm32 -fi +############################################################################## +# Building section +# You probably don't have to touch anything after this +############################################################################## + +# Fetch a versioned file from a URL +fetch() { + if [ ! -e ${STAMPS}/$1.fetch ]; then + log "Downloading $1 sources..." + ${FETCHCMD} $2 + touch ${STAMPS}/$1.fetch + fi +} + +# Log a message out to the console +log() { + echo "******************************************************************" + echo "* $*" + echo "******************************************************************" +} + +# Unpack an archive +unpack() { + log Unpacking $* + # Use 'auto' mode decompression. Replace with a switch if tar doesn't support -a + ARCHIVE=$(ls ${SOURCES}/$1.tar.*) + case ${ARCHIVE} in + *.bz2) + echo "archive type bz2" + TYPE=j + ;; + *.gz) + echo "archive type gz" + TYPE=z + ;; + *) + echo "Unknown archive type of $1" + echo "leaving the decision to tar" + TYPE= + ;; + esac + ${TAR} xf${TYPE}${TARFLAGS} ${SOURCES}/$1.tar.* +} + +# Install a build +doinstall() { + log $1 + ${SUDO} make ${MAKEFLAGS} $2 $3 $4 $5 $6 $7 $8 +} + +if [ ! -d $SUMMON_DIR ]; then + mkdir -p ${SUMMON_DIR} + SUMMON_DIR_CREATED=1 +else + SUMMON_DIR_CREATED=0 fi +mkdir -p ${STAMPS} ${SOURCES} + +cd ${SOURCES} + +fetch ${BINUTILS} http://ftp.gnu.org/gnu/binutils/${BINUTILS}.tar.bz2 +fetch ${GCC} ${GCCURL} +fetch ${NEWLIB} ftp://sources.redhat.com/pub/newlib/${NEWLIB}.tar.gz +fetch ${GDB} http://ftp.gnu.org/gnu/gdb/${GDB}.tar.bz2 +fetch ${GMP} ftp://ftp.gmplib.org/pub/${GMP}/${GMP}.tar.bz2 +fetch ${MPFR} http://www.mpfr.org/${MPFR}/${MPFR}.tar.bz2 +fetch ${MPC} http://www.multiprecision.org/mpc/download/${MPC}.tar.gz cd ${SUMMON_DIR} @@ -119,15 +202,10 @@ if [ ! -e build ]; then mkdir build fi -if [ ! -e .${BINUTILS}.build ]; then - echo "******************************************************************" - echo "* Unpacking ${BINUTILS}" - echo "******************************************************************" - tar xfvj ${SOURCES}/${BINUTILS}.tar.bz2 +if [ ! -e ${STAMPS}/${BINUTILS}.build ]; then + unpack ${BINUTILS} cd build - echo "******************************************************************" - echo "* Configuring ${BINUTILS}" - echo "******************************************************************" + log "Configuring ${BINUTILS}" ../${BINUTILS}/configure --target=${TARGET} \ --prefix=${PREFIX} \ --enable-interwork \ @@ -136,33 +214,27 @@ if [ ! -e .${BINUTILS}.build ]; then --with-gnu-ld \ --disable-nls \ --disable-werror \ - ${BINUTILFLAGS} || exit - echo "******************************************************************" - echo "* Building ${BINUTILS}" - echo "******************************************************************" - make ${PARALLEL} || exit - echo "******************************************************************" - echo "* Installing ${BINUTILS}" - echo "******************************************************************" - make install || exit + ${BINUTILFLAGS} + log "Building ${BINUTILS}" + make ${MAKEFLAGS} + doinstall ${BINUTILS} install cd .. - echo "******************************************************************" - echo "* Cleaning up ${BINUTILS}" - echo "******************************************************************" - touch .${BINUTILS}.build + log "Cleaning up ${BINUTILS}" + touch ${STAMPS}/${BINUTILS}.build rm -rf build/* ${BINUTILS} fi -if [ ! -e .${GCC}-boot.build ]; then - echo "******************************************************************" - echo "* Unpacking ${GCC}-boot" - echo "******************************************************************" - tar xfvj ${SOURCES}/${GCC}.tar.bz2 +if [ ! -e ${STAMPS}/${GCC}-boot.build ]; then + unpack ${GCC} boot + unpack ${GMP} + mv ${GMP} ${GCCDIR}/gmp + unpack ${MPFR} + mv ${MPFR} ${GCCDIR}/mpfr + unpack ${MPC} + mv ${MPC} ${GCCDIR}/mpc cd build - echo "******************************************************************" - echo "* Configuring ${GCC}-boot" - echo "******************************************************************" - ../${GCC}/configure --target=${TARGET} \ + log "Configuring ${GCC}-boot" + ../${GCCDIR}/configure --target=${TARGET} \ --prefix=${PREFIX} \ --enable-interwork \ --enable-multilib \ @@ -174,32 +246,23 @@ if [ ! -e .${GCC}-boot.build ]; then --with-gnu-ld \ --disable-nls \ --disable-werror \ - ${GCCFLAGS} || exit - echo "******************************************************************" - echo "* Building ${GCC}-boot" - echo "******************************************************************" - make ${PARALLEL} all-gcc || exit - echo "******************************************************************" - echo "* Installing ${GCC}-boot" - echo "******************************************************************" - make install-gcc || exit + --with-system-zlib \ + ${GCCFLAGS} + log "Building ${GCC}-boot" + make ${MAKEFLAGS} all-gcc + doinstall ${GCC}-boot install-gcc cd .. - echo "******************************************************************" - echo "* Cleaning up ${GCC}-boot" - echo "******************************************************************" - touch .${GCC}-boot.build - rm -rf build/* ${GCC} + log "Cleaning up ${GCC}-boot" + touch ${STAMPS}/${GCC}-boot.build + rm -rf build/* ${GCCDIR} fi -if [ ! -e .${NEWLIB}.build ]; then - echo "******************************************************************" - echo "* Unpacking ${NEWLIB}" - echo "******************************************************************" - tar xfvz ${SOURCES}/${NEWLIB}.tar.gz +if [ ! -e ${STAMPS}/${NEWLIB}.build ]; then + unpack ${NEWLIB} cd build - echo "******************************************************************" - echo "* Configuring ${NEWLIB}" - echo "******************************************************************" + log "Configuring ${NEWLIB}" + # configuration options and flags partially + # from https://github.com/jsnyder/arm-eabi-toolchain ../${NEWLIB}/configure --target=${TARGET} \ --prefix=${PREFIX} \ --enable-interwork \ @@ -208,178 +271,74 @@ if [ ! -e .${NEWLIB}.build ]; then --with-gnu-ld \ --disable-nls \ --disable-werror \ - --disable-newlib-supplied-syscalls || exit - echo "******************************************************************" - echo "* Building ${NEWLIB}" - echo "******************************************************************" - make ${PARALLEL} || exit - echo "******************************************************************" - echo "* Installing ${NEWLIB}" - echo "******************************************************************" - make install || exit + --disable-newlib-supplied-syscalls \ + --disable-shared \ + --disable-nls \ + --disable-libgloss \ + --with-float=soft + log "Building ${NEWLIB}" + NEWLIB_FLAGS="-ffunction-sections -fdata-sections -DPREFER_SIZE_OVER_SPEED -D__OPTIMIZE_SIZE__ -Os -fomit-frame-pointer -fno-unroll-loops -D__BUFSIZ__=256 -mabi=aapcs" + make ${MAKEFLAGS} CFLAGS_FOR_TARGET="${NEWLIB_FLAGS}" CCASFLAGS="${NEWLIB_FLAGS}" + doinstall ${NEWLIB} install cd .. - echo "******************************************************************" - echo "* Cleaning up ${NEWLIB}" - echo "******************************************************************" - touch .${NEWLIB}.build + log "Cleaning up ${NEWLIB}" + touch ${STAMPS}/${NEWLIB}.build rm -rf build/* ${NEWLIB} fi # Yes, you need to build gcc again! -if [ ! -e .${GCC}.build ]; then - echo "******************************************************************" - echo "* Unpacking ${GCC}" - echo "******************************************************************" - tar xfvj ${SOURCES}/${GCC}.tar.bz2 +if [ ! -e ${STAMPS}/${GCC}.build ]; then + unpack ${GCC} + unpack ${GMP} + mv ${GMP} ${GCCDIR}/gmp + unpack ${MPFR} + mv ${MPFR} ${GCCDIR}/mpfr + unpack ${MPC} + mv ${MPC} ${GCCDIR}/mpc cd build - echo "******************************************************************" - echo "* Configuring ${GCC}" - echo "******************************************************************" - ../${GCC}/configure --target=${TARGET} \ + log "Configuring ${GCC}" + [ ${USE_CPP} = 1 ] && GCCFLAGS="--enable-languages='c,c++' ${GCCFLAGS}" + ../${GCCDIR}/configure --target=${TARGET} \ --prefix=${PREFIX} \ --enable-interwork \ --enable-multilib \ - --enable-languages="c,c++" \ --with-newlib \ --disable-shared \ --with-gnu-as \ --with-gnu-ld \ --disable-nls \ --disable-werror \ - ${GCCFLAGS} || exit - echo "******************************************************************" - echo "* Building ${GCC}" - echo "******************************************************************" - make ${PARALLEL} || exit - echo "******************************************************************" - echo "* Installing ${GCC}" - echo "******************************************************************" - make install || exit + --with-system-zlib \ + ${GCCFLAGS} + log "Building ${GCC}" + make ${MAKEFLAGS} + doinstall ${GCC} install cd .. - echo "******************************************************************" - echo "* Cleaning up ${GCC}" - echo "******************************************************************" - touch .${GCC}.build - rm -rf build/* ${GCC} + log "Cleaning up ${GCC}" + touch ${STAMPS}/${GCC}.build + rm -rf build/* ${GCCDIR} fi -if [ ! -e .${GDB}.build ]; then - echo "******************************************************************" - echo "* Unpacking ${GDB}" - echo "******************************************************************" - tar xfvj ${SOURCES}/${GDB}.tar.bz2 +if [ ! -e ${STAMPS}/${GDB}.build ]; then + unpack ${GDB} cd build - echo "******************************************************************" - echo "* Configuring ${GDB}" - echo "******************************************************************" + log "Configuring ${GDB}" ../${GDB}/configure --target=${TARGET} \ --prefix=${PREFIX} \ --enable-interwork \ --enable-multilib \ --disable-werror \ - ${GDBFLAGS} || exit - echo "******************************************************************" - echo "* Building ${GDB}" - echo "******************************************************************" - make ${PARALLEL} || exit - echo "******************************************************************" - echo "* Installing ${GDB}" - echo "******************************************************************" - make install || exit + ${GDBFLAGS} + log "Building ${GDB}" + make ${MAKEFLAGS} + doinstall ${GDB} install cd .. - echo "******************************************************************" - echo "* Cleaning up ${GDB}" - echo "******************************************************************" - touch .${GDB}.build + log "Cleaning up ${GDB}" + touch ${STAMPS}/${GDB}.build rm -rf build/* ${GDB} fi -if [ ${LIBSTM32_EN} != 0 ]; then -if [ ! -e .libcmsis-${LIBCMSIS}.build ]; then - echo "******************************************************************" - echo "* Unpacking libcmsis-${LIBCMSIS}" - echo "******************************************************************" - tar xfvj ${SOURCES}/libcmsis-${LIBCMSIS}.tar.bz2 - cd libcmsis-${LIBCMSIS} - echo "******************************************************************" - echo "* Building libcmsis-${LIBCMSIS}" - echo "******************************************************************" - make arch_prefix=${TARGET} prefix=${PREFIX} || exit - echo "******************************************************************" - echo "* Installing libcmsis-${LIBCMSIS}" - echo "******************************************************************" - make arch_prefix=${TARGET} prefix=${PREFIX} install || exit - cd .. - echo "******************************************************************" - echo "* Cleaning up libcmsis-${LIBCMSIS}" - echo "******************************************************************" - touch .libcmsis-${LIBCMSIS}.build - rm -rf libcmsis-${LIBCMSIS} -fi - -if [ ! -e .libstm32-${LIBSTM32}.build ]; then - echo "******************************************************************" - echo "* Unpacking libstm32-${LIBSTM32}" - echo "******************************************************************" - tar xfvj ${SOURCES}/libstm32-${LIBSTM32}.tar.bz2 - cd libstm32-${LIBSTM32} - echo "******************************************************************" - echo "* Building libstm32-${LIBSTM32}" - echo "******************************************************************" - make arch_prefix=${TARGET} prefix=${PREFIX} || exit - echo "******************************************************************" - echo "* Installing libstm32-${LIBSTM32}" - echo "******************************************************************" - make arch_prefix=${TARGET} prefix=${PREFIX} install || exit - cd .. - echo "******************************************************************" - echo "* Cleaning up libstm32-${LIBSTM32}" - echo "******************************************************************" - touch .libstm32-${LIBSTM32}.build - rm -rf libstm32-${LIBSTM32} -fi - -if [ ! -e .libstm32usb-${LIBSTM32USB}.build ]; then - echo "******************************************************************" - echo "* Unpacking libstm32usb-${LIBSTM32USB}" - echo "******************************************************************" - tar xfvj ${SOURCES}/libstm32usb-${LIBSTM32USB}.tar.bz2 - cd libstm32usb-${LIBSTM32USB} - echo "******************************************************************" - echo "* Building libstm32usb-${LIBSTM32USB}" - echo "******************************************************************" - make arch_prefix=${TARGET} prefix=${PREFIX} || exit - echo "******************************************************************" - echo "* Installing libstm32usb-${LIBSTM32USB}" - echo "******************************************************************" - make arch_prefix=${TARGET} prefix=${PREFIX} install || exit - cd .. - echo "******************************************************************" - echo "* Cleaning up libstm32usb-${LIBSTM32USB}" - echo "******************************************************************" - touch .libstm32usb-${LIBSTM32USB}.build - rm -rf libstm32usb-${LIBSTM32USB} -fi -fi - -if [ $LIBOPENSTM32_EN != 0 ]; then - echo "******************************************************************" - echo "* Unpacking libopenstm32-${LIBOPENSTM32}" - echo "******************************************************************" - tar xfvj ${SOURCES}/libopenstm32-${LIBOPENSTM32}.tar.bz2 - cd libopenstm32-${LIBOPENSTM32} - echo "******************************************************************" - echo "* Building libopenstm32-${LIBOPENSTM32}" - echo "******************************************************************" - make PREFIX=${TARGET} DESTDIR=${PREFIX} || exit - echo "******************************************************************" - echo "* Installing libopenstm32-${LIBOPENSTM32}" - echo "******************************************************************" - make PREFIX=${TARGET} DESTDIR=${PREFIX} install || exit - cd .. - echo "******************************************************************" - echo "* Cleaning up libopenstm32-${LIBOPENSTM32}" - echo "******************************************************************" - touch .libopenstm32-${LIBOPENSTM32}.build - rm -rf libopenstm32-${LIBOPENSTM32} +if [ ${SUMMON_DIR_CREATED} = 1 ]; then + log "Removing work directory" + rm -rf ${SUMMON_DIR} fi