X-Git-Url: http://wien.tomnetworks.com/gitweb/?a=blobdiff_plain;f=summon-arm-toolchain;h=31c7991b350d21f9f822eaa73307473c35ba5209;hb=a306cfd7c432038525ae68776a213ed8069769ab;hp=7aab2cfa5d35d699b7ebae5f46bd3be36cadfd26;hpb=13aac56a4e52eb18d9632b071ae2d7b7d05dfb8a;p=summon-arm-toolchain.git diff --git a/summon-arm-toolchain b/summon-arm-toolchain index 7aab2cf..31c7991 100755 --- a/summon-arm-toolchain +++ b/summon-arm-toolchain @@ -1,4 +1,4 @@ -#!/bin/bash +#!/bin/sh # Written by Uwe Hermann , released as public domain. # Modified by Piotr Esden-Tempski , released as public domain. @@ -13,48 +13,50 @@ set -e # Settings section # You probably want to customize those ############################################################################## -TARGET=arm-eabi # Or: TARGET=arm-elf -PREFIX=${HOME}/arm # Install location of your final toolchain +TARGET=arm-none-eabi # Or: TARGET=arm-elf +[ -z $PREFIX ] && PREFIX=${HOME}/arm # Install location of your final toolchain +[ -z $WORKDIR ] && WORKDIR=$PREFIX/work #temporary directory PARALLEL= # Or: PARALLEL="-j 5" for 4 CPUs # Set to 'sudo' if you need superuser privileges while installing SUDO='' # Set to 1 to be quieter while running -QUIET=1 +QUIET=0 # Set to 1 to use linaro gcc instead of the FSF gcc -USE_LINARO=1 -# Set to 1 to enable building of OpenOCD -OOCD_EN=1 -# Set to 1 to build libstm32 provided by ST -LIBSTM32_EN=0 -# Set to 1 to build libopenstm32 an open source library for stm32 -LIBOPENSTM32_EN=1 +USE_LINARO=0 +# Set to 1 to enable C++ +USE_CPP=0 # Make the gcc default to Cortex-M3 DEFAULT_TO_CORTEX_M3=1 ############################################################################## # Version and download url settings section ############################################################################## -if [ ${USE_LINARO} == 0 ] ; then +if [ ${USE_LINARO} = 0 ] ; then # For FSF GCC: - GCCVERSION=4.5.1 - GCC=gcc-${GCCVERSION} - GCCURL=http://ftp.gnu.org/gnu/gcc/${GCC}/${GCC}.tar.gz + GCCVERSION=4.6.1 + if [ ${USE_CPP} = 0 ]; then + GCC=gcc-core-${GCCVERSION} + GCCDIR=gcc-${GCCVERSION} + else + GCC=gcc-${GCCVERSION} + GCCDIR=${GCC} + fi + GCCURL=http://ftp.gnu.org/gnu/gcc/${GCCDIR}/${GCC}.tar.bz2 else # For the Linaro GCC: GCCRELEASE=4.6-2011.07 - GCCVERSION=${GCCRELEASE} - GCC=gcc-linaro-${GCCVERSION} - GCCURL=http://launchpad.net/gcc-linaro/4.6/${GCCRELEASE}/+download/${GCC}.tar.bz2 + GCCVERSION=4.6-2011.07-0 + GCC=gcc-linaro-${GCCRELEASE} + GCCDIR=gcc-linaro-${GCCVERSION} + GCCURL=http://launchpad.net/gcc-linaro/4.6/${GCCRELEASE}/+download/gcc-linaro-${GCCRELEASE}.tar.bz2 fi BINUTILS=binutils-2.21 NEWLIB=newlib-1.19.0 GDB=gdb-7.3 -OOCD=master -LIBCMSIS=v1.10-2 -LIBSTM32=v3.0.0-1 -LIBSTM32USB=v3.0.1-1 -LIBOPENSTM32=master +GMP=gmp-5.0.2 +MPFR=mpfr-3.0.1 +MPC=mpc-0.9 ############################################################################## # Flags section @@ -71,7 +73,7 @@ echo "${CPUS} cpu's detected running make with '${PARALLEL}' flag" GDBFLAGS= BINUTILFLAGS= -if [ ${DEFAULT_TO_CORTEX_M3} == 0 ] ; then +if [ ${DEFAULT_TO_CORTEX_M3} = 0 ] ; then GCCFLAGS= else # To default to the Cortex-M3: @@ -93,58 +95,38 @@ fi export PATH="${PREFIX}/bin:${PATH}" -SUMMON_DIR=$(pwd) +SUMMON_DIR=${WORKDIR} SOURCES=${SUMMON_DIR}/sources STAMPS=${SUMMON_DIR}/stamps -############################################################################## -# Tool section -############################################################################## -TAR=tar - ############################################################################## # OS and Tooldetection section # Detects which tools and flags to use ############################################################################## -case "$(uname)" in - Linux) - echo "Found Linux OS." - ;; - Darwin) - echo "Found Darwin OS." - - # darwin dependencies - DARWINDEPS="gnu-tar wget mpfr libmpc gmp" - DARWINDEPSCOUNT=4 - - echo "Installing dependencies" - if ! which brew > /dev/null; then - echo "homebrew not installed." - else - brew install ${DARWINDEPS} | grep -v '^Warning: Formula already installed: ' - fi - - GCCFLAGS="${GCCFLAGS} \ - --with-gmp=$(brew --prefix gmp) \ - --with-mpfr=$(brew --prefix mpfr) \ - --with-mpc=$(brew --prefix mpc) - -with-libiconv-prefix=$(brew --prefix libiconv)" - - TAR=gnutar - - OOCD_CFLAGS="-m32 -I/opt/mine/include -I/opt/local/include" - OOCD_LDFLAGS="-L/opt/mine/lib -L/opt/local/lib" - ;; - CYGWIN*) - echo "Found CygWin that means Windows most likely." - ;; - *) - echo "Found unknown OS. Aborting!" - exit 1 - ;; -esac +# normalized fetching with whatever we can find +if which fetch > /dev/null; then + FETCHCMD="fetch -p" +elif which wget > /dev/null; then + FETCHCMD=wget +elif which curl > /dev/null; then + FETCHCMD="curl -O" +else + FETCHCMD=ftp # the only HTTP client on some BSD +fi + +if [ USE_LINARO = 1 ]; then + if which gnutar > /dev/null; then + TAR=gnutar + elif which gtar > /dev/null; then + TAR=gtar + else # hopefully it understands the GNU format + TAR=tar + fi +else + TAR=tar # use the system tar +fi ############################################################################## # Building section @@ -152,23 +134,23 @@ esac ############################################################################## # Fetch a versioned file from a URL -function fetch { +fetch() { if [ ! -e ${STAMPS}/$1.fetch ]; then log "Downloading $1 sources..." - wget -c --no-passive-ftp $2 + ${FETCHCMD} $2 touch ${STAMPS}/$1.fetch fi } # Log a message out to the console -function log { +log() { echo "******************************************************************" echo "* $*" echo "******************************************************************" } # Unpack an archive -function unpack { +unpack() { log Unpacking $* # Use 'auto' mode decompression. Replace with a switch if tar doesn't support -a ARCHIVE=$(ls ${SOURCES}/$1.tar.*) @@ -183,20 +165,25 @@ function unpack { ;; *) echo "Unknown archive type of $1" - echo ${ARCHIVE} - exit 1 + echo "leaving the decision to tar" + TYPE= ;; esac ${TAR} xf${TYPE}${TARFLAGS} ${SOURCES}/$1.tar.* } # Install a build -function install { +doinstall() { log $1 ${SUDO} make ${MAKEFLAGS} $2 $3 $4 $5 $6 $7 $8 } - +if [ ! -d $SUMMON_DIR ]; then + mkdir -p ${SUMMON_DIR} + SUMMON_DIR_CREATED=1 +else + SUMMON_DIR_CREATED=0 +fi mkdir -p ${STAMPS} ${SOURCES} cd ${SOURCES} @@ -205,64 +192,9 @@ fetch ${BINUTILS} http://ftp.gnu.org/gnu/binutils/${BINUTILS}.tar.bz2 fetch ${GCC} ${GCCURL} fetch ${NEWLIB} ftp://sources.redhat.com/pub/newlib/${NEWLIB}.tar.gz fetch ${GDB} http://ftp.gnu.org/gnu/gdb/${GDB}.tar.bz2 - -if [ ${OOCD_EN} != 0 ]; then -if [ ! -e openocd-${OOCD}.tar.bz2 ]; then - log "Cloning OpenOCD sources..." - git clone git://openocd.git.sourceforge.net/gitroot/openocd/openocd openocd-${OOCD} - cd openocd-${OOCD} - ./bootstrap - cd .. - tar cfvj openocd-${OOCD}.tar.bz2 openocd-${OOCD} - #git archive --format=tar --prefix=openocd-${OOCD}/ ${OOCD} | \ - # bzip2 --stdout > ../openocd-${OOCD}.tar.bz2 - rm -rf openocd-${OOCD} -fi -fi - -if [ ${LIBSTM32_EN} != 0 ]; then -if [ ! -e libcmsis-${LIBCMSIS}.tar.bz2 ]; then - log "Cloning libcmsis sources..." - git clone git://git.open-bldc.org/libcmsis.git - cd libcmsis - git archive --format=tar --prefix=libcmsis-${LIBCMSIS}/ ${LIBCMSIS} | \ - bzip2 --stdout > ../libcmsis-${LIBCMSIS}.tar.bz2 - cd .. - rm -rf libcmsis -fi - -if [ ! -e libstm32-${LIBSTM32}.tar.bz2 ]; then - log "Cloning libstm32 sources..." - git clone git://git.open-bldc.org/libstm32.git - cd libstm32 - git archive --format=tar --prefix=libstm32-${LIBSTM32}/ ${LIBSTM32} | \ - bzip2 --stdout > ../libstm32-${LIBSTM32}.tar.bz2 - cd .. - rm -rf libstm32 -fi - -if [ ! -e libstm32usb-${LIBSTM32USB}.tar.bz2 ]; then - log "Cloning libstm32usb sources..." - git clone git://git.open-bldc.org/libstm32usb.git - cd libstm32usb - git archive --format=tar --prefix=libstm32usb-${LIBSTM32USB}/ ${LIBSTM32USB} | \ - bzip2 --stdout > ../libstm32usb-${LIBSTM32USB}.tar.bz2 - cd .. - rm -rf libstm32usb -fi -fi - -if [ ${LIBOPENSTM32_EN} != 0 ]; then -if [ ! -e libopenstm32-${LIBOPENSTM32}.tar.bz2 ]; then - log "Cloning libopenstm32 sources..." - git clone git://libopenstm32.git.sourceforge.net/gitroot/libopenstm32/libopenstm32 - cd libopenstm32 - git archive --format=tar --prefix=libopenstm32-${LIBOPENSTM32}/ ${LIBOPENSTM32} | \ - bzip2 --stdout > ../libopenstm32-${LIBOPENSTM32}.tar.bz2 - cd .. - rm -rf libopenstm32 -fi -fi +fetch ${GMP} ftp://ftp.gmplib.org/pub/${GMP}/${GMP}.tar.bz2 +fetch ${MPFR} http://www.mpfr.org/${MPFR}/${MPFR}.tar.bz2 +fetch ${MPC} http://www.multiprecision.org/mpc/download/${MPC}.tar.gz cd ${SUMMON_DIR} @@ -285,7 +217,7 @@ if [ ! -e ${STAMPS}/${BINUTILS}.build ]; then ${BINUTILFLAGS} log "Building ${BINUTILS}" make ${MAKEFLAGS} - install ${BINUTILS} install + doinstall ${BINUTILS} install cd .. log "Cleaning up ${BINUTILS}" touch ${STAMPS}/${BINUTILS}.build @@ -294,9 +226,15 @@ fi if [ ! -e ${STAMPS}/${GCC}-boot.build ]; then unpack ${GCC} boot + unpack ${GMP} + mv ${GMP} ${GCCDIR}/gmp + unpack ${MPFR} + mv ${MPFR} ${GCCDIR}/mpfr + unpack ${MPC} + mv ${MPC} ${GCCDIR}/mpc cd build log "Configuring ${GCC}-boot" - ../${GCC}/configure --target=${TARGET} \ + ../${GCCDIR}/configure --target=${TARGET} \ --prefix=${PREFIX} \ --enable-interwork \ --enable-multilib \ @@ -312,17 +250,19 @@ if [ ! -e ${STAMPS}/${GCC}-boot.build ]; then ${GCCFLAGS} log "Building ${GCC}-boot" make ${MAKEFLAGS} all-gcc - install ${GCC}-boot install-gcc + doinstall ${GCC}-boot install-gcc cd .. log "Cleaning up ${GCC}-boot" touch ${STAMPS}/${GCC}-boot.build - rm -rf build/* ${GCC} + rm -rf build/* ${GCCDIR} fi if [ ! -e ${STAMPS}/${NEWLIB}.build ]; then unpack ${NEWLIB} cd build log "Configuring ${NEWLIB}" + # configuration options and flags partially + # from https://github.com/jsnyder/arm-eabi-toolchain ../${NEWLIB}/configure --target=${TARGET} \ --prefix=${PREFIX} \ --enable-interwork \ @@ -332,10 +272,14 @@ if [ ! -e ${STAMPS}/${NEWLIB}.build ]; then --disable-nls \ --disable-werror \ --disable-newlib-supplied-syscalls \ + --disable-shared \ + --disable-nls \ + --disable-libgloss \ --with-float=soft log "Building ${NEWLIB}" - make ${MAKEFLAGS} CFLAGS_FOR_TARGET="-msoft-float" CCASFLAGS="-msoft-float" - install ${NEWLIB} install + NEWLIB_FLAGS="-ffunction-sections -fdata-sections -DPREFER_SIZE_OVER_SPEED -D__OPTIMIZE_SIZE__ -Os -fomit-frame-pointer -fno-unroll-loops -D__BUFSIZ__=256 -mabi=aapcs" + make ${MAKEFLAGS} CFLAGS_FOR_TARGET="${NEWLIB_FLAGS}" CCASFLAGS="${NEWLIB_FLAGS}" + doinstall ${NEWLIB} install cd .. log "Cleaning up ${NEWLIB}" touch ${STAMPS}/${NEWLIB}.build @@ -345,13 +289,19 @@ fi # Yes, you need to build gcc again! if [ ! -e ${STAMPS}/${GCC}.build ]; then unpack ${GCC} + unpack ${GMP} + mv ${GMP} ${GCCDIR}/gmp + unpack ${MPFR} + mv ${MPFR} ${GCCDIR}/mpfr + unpack ${MPC} + mv ${MPC} ${GCCDIR}/mpc cd build log "Configuring ${GCC}" - ../${GCC}/configure --target=${TARGET} \ + [ ${USE_CPP} = 1 ] && GCCFLAGS="--enable-languages='c,c++' ${GCCFLAGS}" + ../${GCCDIR}/configure --target=${TARGET} \ --prefix=${PREFIX} \ --enable-interwork \ --enable-multilib \ - --enable-languages="c,c++" \ --with-newlib \ --disable-shared \ --with-gnu-as \ @@ -362,11 +312,11 @@ if [ ! -e ${STAMPS}/${GCC}.build ]; then ${GCCFLAGS} log "Building ${GCC}" make ${MAKEFLAGS} - install ${GCC} install + doinstall ${GCC} install cd .. log "Cleaning up ${GCC}" touch ${STAMPS}/${GCC}.build - rm -rf build/* ${GCC} + rm -rf build/* ${GCCDIR} fi if [ ! -e ${STAMPS}/${GDB}.build ]; then @@ -381,96 +331,14 @@ if [ ! -e ${STAMPS}/${GDB}.build ]; then ${GDBFLAGS} log "Building ${GDB}" make ${MAKEFLAGS} - install ${GDB} install + doinstall ${GDB} install cd .. log "Cleaning up ${GDB}" touch ${STAMPS}/${GDB}.build rm -rf build/* ${GDB} fi -if [ ${OOCD_EN} != 0 ]; then -if [ ! -e ${STAMPS}/openocd-${OOCD}.build ]; then - unpack openocd-${OOCD} - cd build - log "Configuring openocd-${OOCD}" - CFLAGS="${CFLAGS} ${OOCD_CFLAGS}" \ - LDFLAGS="${LDFLAGS} ${OOCD_LDFLAGS}" \ - ../openocd-${OOCD}/configure --enable-maintainer-mode \ - --prefix=${PREFIX} \ - --enable-dummy \ - --enable-parport \ - --enable-ft2232_libftdi \ - --enable-usb_blaster_libftdi \ - --enable-amtjtagaccel \ - --enable-zy1000 \ - --enable-ep93xx \ - --enable-at91rm9200 \ - --enable-gw16012 \ - --enable-presto_libftdi \ - --enable-usbprog \ - --enable-jlink \ - --enable-vsllink \ - --enable-rlink \ - --enable-arm-jtag-ew \ - --enable-buspirate - log "Building openocd-${OOCD}" - make ${MAKEFLAGS} - install openocd-${OOCD} install - cd .. - log "Cleaning up openocd-${OOCD}" - touch ${STAMPS}/openocd-${OOCD}.build - rm -rf build/* ${OOCD} -fi -fi - -if [ ${LIBSTM32_EN} != 0 ]; then -if [ ! -e ${STAMPS}/libcmsis-${LIBCMSIS}.build ]; then - unpack libcmsis-${LIBCMSIS} - cd libcmsis-${LIBCMSIS} - log "Building libcmsis-${LIBCMSIS}" - make arch_prefix=${TARGET} prefix=${PREFIX} - install libcmsis-${LIBCMSIS} arch_prefix=${TARGET} prefix=${PREFIX} install - cd .. - log "Cleaning up libcmsis-${LIBCMSIS}" - touch ${STAMPS}/libcmsis-${LIBCMSIS}.build - rm -rf libcmsis-${LIBCMSIS} -fi - -if [ ! -e ${STAMPS}/libstm32-${LIBSTM32}.build ]; then - unpack libstm32-${LIBSTM32} - cd libstm32-${LIBSTM32} - log "Building libstm32-${LIBSTM32}" - make arch_prefix=${TARGET} prefix=${PREFIX} - install libstm32-${LIBSTM32} arch_prefix=${TARGET} prefix=${PREFIX} install - cd .. - log "Cleaning up libstm32-${LIBSTM32}" - touch ${STAMPS}/libstm32-${LIBSTM32}.build - rm -rf libstm32-${LIBSTM32} -fi - -if [ ! -e ${STAMPS}/libstm32usb-${LIBSTM32USB}.build ]; then - unpack libstm32usb-${LIBSTM32USB} - cd libstm32usb-${LIBSTM32USB} - log "Building libstm32usb-${LIBSTM32USB}" - make arch_prefix=${TARGET} prefix=${PREFIX} - install libstm32usb-${LIBSTM32USB} arch_prefix=${TARGET} prefix=${PREFIX} install - cd .. - log "Cleaning up libstm32usb-${LIBSTM32USB}" - touch ${STAMPS}/libstm32usb-${LIBSTM32USB}.build - rm -rf libstm32usb-${LIBSTM32USB} -fi -fi - -if [ $LIBOPENSTM32_EN != 0 ]; then -if [ ! -e ${STAMPS}/libopenstm32-${LIBOPENSTM32}.build ]; then - unpack libopenstm32-${LIBOPENSTM32} - cd libopenstm32-${LIBOPENSTM32} - log "Building libopenstm32-${LIBOPENSTM32}" - make PREFIX=${TARGET} DESTDIR=${PREFIX} - install libopenstm32-${LIBOPENSTM32} PREFIX=${TARGET} DESTDIR=${PREFIX} install - cd .. - log "Cleaning up libopenstm32-${LIBOPENSTM32}" - touch ${STAMPS}/libopenstm32-${LIBOPENSTM32}.build - rm -rf libopenstm32-${LIBOPENSTM32} -fi +if [ ${SUMMON_DIR_CREATED} = 1 ]; then + log "Removing work directory" + rm -rf ${SUMMON_DIR} fi