X-Git-Url: http://wien.tomnetworks.com/gitweb/?a=blobdiff_plain;f=src%2Fmainboard%2Flippert%2Ffrontrunner%2Fromstage.c;h=5578fd253a8e217ce5645e099db9da44e23fd833;hb=57b2ff886e0ce2c92820f5722c8031def3ac94cf;hp=64f1d7b6dc4d26bd91ce8c46dab268b72db69542;hpb=bba0d76952754da0c38cf94cf4a6860cff3ce9ba;p=coreboot.git

diff --git a/src/mainboard/lippert/frontrunner/romstage.c b/src/mainboard/lippert/frontrunner/romstage.c
index 64f1d7b6d..5578fd253 100644
--- a/src/mainboard/lippert/frontrunner/romstage.c
+++ b/src/mainboard/lippert/frontrunner/romstage.c
@@ -1,50 +1,72 @@
 #include <stdint.h>
+#include <spd.h>
 #include <device/pci_def.h>
 #include <arch/io.h>
 #include <device/pnp_def.h>
 #include <arch/hlt.h>
 #include <console/console.h>
-#include "lib/ramtest.c"
 #include "superio/winbond/w83627hf/w83627hf_early_serial.c"
 #include "cpu/x86/bist.h"
 #include "cpu/x86/msr.h"
 #include <cpu/amd/gx2def.h>
 #include <cpu/amd/geode_post_code.h>
 #include "southbridge/amd/cs5535/cs5535.h"
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
 #include "southbridge/amd/cs5535/cs5535_early_smbus.c"
 #include "southbridge/amd/cs5535/cs5535_early_setup.c"
-#include "northbridge/amd/gx2/raminit.h"
 
-/* this has to be done on a per-mainboard basis, esp. if you don't have smbus */
-static void sdram_set_spd_registers(const struct mem_controller *ctrl)
+#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
+
+static const unsigned char spdbytes[] = {	/* 4x Qimonda HYB25DC512160CF-6 */
+	0xFF, 0xFF,				/* only values used by raminit.c are set */
+	[SPD_MEMORY_TYPE]		= SPD_MEMORY_TYPE_SDRAM_DDR,	/* (Fundamental) memory type */
+	[SPD_NUM_ROWS]			= 0x0D,	/* Number of row address bits [13] */
+	[SPD_NUM_COLUMNS]		= 0x0A,	/* Number of column address bits [10] */
+	[SPD_NUM_DIMM_BANKS]		= 1,	/* Number of module rows (banks) */
+	0xFF, 0xFF, 0xFF,
+	[SPD_MIN_CYCLE_TIME_AT_CAS_MAX]	= 0x60,	/* SDRAM cycle time (highest CAS latency), RAS access time (tRAC) [6.0 ns in BCD] */
+	0xFF, 0xFF,
+	[SPD_REFRESH]			= 0x82,	/* Refresh rate/type [Self Refresh, 7.8 us] */
+	[SPD_PRIMARY_SDRAM_WIDTH]	= 64,	/* SDRAM width (primary SDRAM) [64 bits] */
+	0xFF, 0xFF, 0xFF,
+	[SPD_NUM_BANKS_PER_SDRAM]	= 4,	/* SDRAM device attributes, number of banks on SDRAM device */
+	[SPD_ACCEPTABLE_CAS_LATENCIES]	= 0x1C,	/* SDRAM device attributes, CAS latency [3, 2.5, 2] */
+	0xFF, 0xFF,
+	[SPD_MODULE_ATTRIBUTES]		= 0x20,	/* SDRAM module attributes [differential clk] */
+	[SPD_DEVICE_ATTRIBUTES_GENERAL]	= 0x40,	/* SDRAM device attributes, general [Concurrent AP] */
+	[SPD_SDRAM_CYCLE_TIME_2ND]	= 0x60,	/* SDRAM cycle time (2nd highest CAS latency) [6.0 ns in BCD] */
+	0xFF,
+	[SPD_SDRAM_CYCLE_TIME_3RD]	= 0x75,	/* SDRAM cycle time (3rd highest CAS latency) [7.5 ns in BCD] */
+	0xFF,
+	[SPD_tRP]			= 72,	/* Min. row precharge time [18 ns in units of 0.25 ns] */
+	[SPD_tRRD]			= 48,	/* Min. row active to row active [12 ns in units of 0.25 ns] */
+	[SPD_tRCD]			= 72,	/* Min. RAS to CAS delay [18 ns in units of 0.25 ns] */
+	[SPD_tRAS]			= 42,	/* Min. RAS pulse width = active to precharge delay [42 ns] */
+	[SPD_BANK_DENSITY]		= 0x40,	/* Density of each row on module [256 MB] */
+	0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+	[SPD_tRFC]			= 72	/* SDRAM Device Minimum Auto Refresh to Active/Auto Refresh [72 ns] */
+};
+
+static inline int spd_read_byte(unsigned int device, unsigned int address)
 {
-	msr_t msr;
-	/* 1. Initialize GLMC registers base on SPD values,
-	 * Hard coded as XpressROM for now */
-	//print_debug("sdram_enable step 1\n");
-	msr = rdmsr(0x20000018);
-	msr.hi = 0x10076013;
-	msr.lo = 0x3400;
-	wrmsr(0x20000018, msr);
-
-	msr = rdmsr(0x20000019);
-	msr.hi = 0x18000008;
-	msr.lo = 0x696332a3;
-	wrmsr(0x20000019, msr);
+	if (device != DIMM0)
+		return 0xFF;	/* No DIMM1, don't even try. */
+
+#if CONFIG_DEBUG_SMBUS
+	if (address >= sizeof(spdbytes) || spdbytes[address] == 0xFF) {
+		print_err("ERROR: spd_read_byte(DIMM0, 0x");
+		print_err_hex8(address);
+		print_err(") returns 0xff\n");
+	}
+#endif
 
+	/* Fake SPD ROM value */
+	return (address < sizeof(spdbytes)) ? spdbytes[address] : 0xFF;
 }
 
+#include "northbridge/amd/gx2/raminit.h"
+#include "northbridge/amd/gx2/pll_reset.c"
 #include "northbridge/amd/gx2/raminit.c"
 #include "lib/generic_sdram.c"
-
-#define PLLMSRhi 0x00000226
-#define PLLMSRlo 0x00000008
-#define PLLMSRlo1 ((0xde << 16) | (1 << 26) | (1 << 24))
-#define PLLMSRlo2 ((1<<14) |(1<<13) | (1<<0))
-#include "northbridge/amd/gx2/pll_reset.c"
 #include "cpu/amd/model_gx2/cpureginit.c"
 #include "cpu/amd/model_gx2/syspreinit.c"
 #include "cpu/amd/model_lx/msrinit.c"
@@ -52,7 +74,7 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl)
 void main(unsigned long bist)
 {
 	static const struct mem_controller memctrl [] = {
-		{.channel0 = {(0xa<<3)|0, (0xa<<3)|1}}
+		{.channel0 = {DIMM0, DIMM1}}
 	};
 	unsigned char temp;
 	SystemPreInit();
@@ -108,6 +130,4 @@ void main(unsigned long bist)
 //	ram_check(0, 16384);
 	ram_check(0x20000, 0x24000);
 //	ram_check(0x00000000, 640*1024);
-
 }
-