X-Git-Url: http://wien.tomnetworks.com/gitweb/?a=blobdiff_plain;f=src%2Fconfig.h;h=b0187a4fc96375eaa8f45955500df5e65f1da570;hb=refs%2Fheads%2Fcoreboot;hp=ab243deb3cb1ac630714845986651f1c74853b1c;hpb=a5826b5ad482f44d293387dc7513e5e98802a54e;p=seabios.git

diff --git a/src/config.h b/src/config.h
index ab243de..b0187a4 100644
--- a/src/config.h
+++ b/src/config.h
@@ -1,6 +1,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include "autoconf.h"
+
 // Configuration definitions.
 
 //#define CONFIG_APPNAME  "QEMU"
@@ -12,123 +14,23 @@
 #define CONFIG_APPNAME6 "BOCHS "
 #define CONFIG_APPNAME4 "BXPC"
 
-// Configure as a coreboot payload.
-#define CONFIG_COREBOOT 0
-
-// Control how verbose debug output is.
-#define CONFIG_DEBUG_LEVEL 1
-// Send debugging information to serial port
-#define CONFIG_DEBUG_SERIAL 0
-// Screen writes are also sent to debug ports.
-#define CONFIG_SCREEN_AND_DEBUG 1
-
-// Support running hardware initialization in parallel
-#define CONFIG_THREADS 1
-// Support int13 disk/floppy drive functions
-#define CONFIG_DRIVES 1
-// Support floppy drive access
-#define CONFIG_FLOPPY 1
-// Support USB devices
-#define CONFIG_USB 1
-// Support USB UHCI controllers
-#define CONFIG_USB_UHCI 1
-// Support USB OHCI controllers
-#define CONFIG_USB_OHCI 1
-// Support USB keyboards
-#define CONFIG_USB_KEYBOARD 1
-// Support for IDE disk code
-#define CONFIG_ATA 1
-// Use 32bit PIO accesses on ATA (minor optimization on PCI transfers)
-#define CONFIG_ATA_PIO32 0
-// Support for booting from a CD
-#define CONFIG_CDROM_BOOT 1
-// Support for emulating a boot CD as a floppy/harddrive
-#define CONFIG_CDROM_EMU 1
-// Support int 1a/b1 PCI BIOS calls
-#define CONFIG_PCIBIOS 1
-// Support int 15/53 APM BIOS calls
-#define CONFIG_APMBIOS 1
-// Support PnP BIOS entry point.
-#define CONFIG_PNPBIOS 1
-// Support Post Memory Manager (PMM) entry point.
-#define CONFIG_PMM 1
-// Support int 19/18 system bootup support
-#define CONFIG_BOOT 1
-// Support an interactive boot menu at end of post.
-#define CONFIG_BOOTMENU 1
-// Amount of time (in ms) to wait at menu before selecting normal boot.
-#define CONFIG_BOOTMENU_WAIT 2500
-// Support int 14 serial port calls
-#define CONFIG_SERIAL 1
-// Support int 17 parallel port calls
-#define CONFIG_LPT 1
-// Support int 16 keyboard calls
-#define CONFIG_KEYBOARD 1
-// Support calling int155f on each keyboard event
-#define CONFIG_KBD_CALL_INT15_4F 1
-// Disable A20 on 16bit boot
-#define CONFIG_DISABLE_A20 0
-// Support for int15c2 mouse calls
-#define CONFIG_PS2_MOUSE 1
-// If the target machine has multiple independent root buses, the
-// extra buses may be specified here.
-#define CONFIG_PCI_ROOT1 0x00
-#define CONFIG_PCI_ROOT2 0x00
-// Support searching coreboot flash format.
-#define CONFIG_COREBOOT_FLASH 0
-// Support floppy images in the coreboot flash.
-#define CONFIG_FLASH_FLOPPY 1
-// Support the lzma decompression algorighm.
-#define CONFIG_LZMA 1
-// Support finding and running option roms during post.
-#define CONFIG_OPTIONROMS 1
-// Set if option roms are already copied to 0xc0000-0xf0000
-#define CONFIG_OPTIONROMS_DEPLOYED 1
-// When option roms are not pre-deployed, SeaBIOS can copy an optionrom
-// from flash for up to 2 devices.
-#define OPTIONROM_VENDEV_1 0x00000000
-#define OPTIONROM_MEM_1 0x00000000
-#define OPTIONROM_VENDEV_2 0x00000000
-#define OPTIONROM_MEM_2 0x00000000
-
-// Support generation of a PIR table in 0xf000 segment (for emulators)
-#define CONFIG_PIRTABLE 1
-// Support generation of MPTable (for emulators)
-#define CONFIG_MPTABLE 1
-// Support generation of SM BIOS tables (for emulators)
-#define CONFIG_SMBIOS 1
-// Support finding a UUID (for smbios) via "magic" outl sequence.
-#define CONFIG_UUID_BACKDOOR 1
-// Support generation of ACPI tables (for emulators)
-#define CONFIG_ACPI 1
-// Support bios callbacks specific to via vgabios.
-#define CONFIG_VGAHOOKS 0
-// Support S3 resume handler.
-#define CONFIG_S3_RESUME 1
-// Run the vga rom during S3 resume.
-#define CONFIG_S3_RESUME_VGA_INIT 0
-// define it if the (emulated) hardware supports SMM mode
-#define CONFIG_USE_SMM 1
 // Maximum number of map entries in the e820 map
 #define CONFIG_MAX_E820 32
-// Space to reserve in f-segment for run-time built bios tables.
+// Space to reserve in f-segment for dynamic allocations
 #define CONFIG_MAX_BIOSTABLE 2048
 // Space to reserve in high-memory for tables
 #define CONFIG_MAX_HIGHTABLE (64*1024)
-
-// Maximum number of ATA controllers to support
-#define CONFIG_MAX_ATA_INTERFACES 4
-// Maximum number of internal drives supported
-#define CONFIG_MAX_DRIVES 8
 // Largest supported externaly facing drive id
 #define CONFIG_MAX_EXTDRIVE 16
+// Number of bytes the smbios may be and still live in the f-segment
+#define BUILD_MAX_SMBIOS_FSEG     600
 
 #define CONFIG_MODEL_ID      0xFC
 #define CONFIG_SUBMODEL_ID   0x00
 #define CONFIG_BIOS_REVISION 0x01
 
 // Various memory addresses used by the code.
-#define BUILD_STACK_ADDR          0x7c00
+#define BUILD_STACK_ADDR          0x7000
 #define BUILD_S3RESUME_STACK_ADDR 0x1000
 #define BUILD_AP_BOOT_ADDR        0x10000
 #define BUILD_EBDA_MINIMUM        0x90000
@@ -138,13 +40,17 @@
 #define BUILD_BIOS_SIZE           0x10000
 // 32KB for shadow ram copying (works around emulator deficiencies)
 #define BUILD_BIOS_TMP_ADDR       0x30000
-
-#define BUILD_APIC_ADDR           0xfee00000
-#define BUILD_IOAPIC_ADDR         0xfec00000
-
 #define BUILD_SMM_INIT_ADDR       0x38000
 #define BUILD_SMM_ADDR            0xa8000
 #define BUILD_SMM_SIZE            0x8000
+#define BUILD_MAX_HIGHMEM         0xe0000000
+
+#define BUILD_PCIMEM_START        0xe0000000
+#define BUILD_PCIMEM_END          0xfec00000    /* IOAPIC is mapped at */
+
+#define BUILD_IOAPIC_ADDR         0xfec00000
+#define BUILD_HPET_ADDRESS        0xfed00000
+#define BUILD_APIC_ADDR           0xfee00000
 
 // Important real-mode segments
 #define SEG_IVT      0x0000
@@ -168,13 +74,13 @@
 #define DEBUG_ISR_09 9
 #define DEBUG_ISR_0e 9
 #define DEBUG_HDL_10 20
-#define DEBUG_HDL_11 1
-#define DEBUG_HDL_12 1
+#define DEBUG_HDL_11 2
+#define DEBUG_HDL_12 2
 #define DEBUG_HDL_13 10
-#define DEBUG_HDL_14 1
+#define DEBUG_HDL_14 2
 #define DEBUG_HDL_15 9
 #define DEBUG_HDL_16 9
-#define DEBUG_HDL_17 1
+#define DEBUG_HDL_17 2
 #define DEBUG_HDL_18 1
 #define DEBUG_HDL_19 1
 #define DEBUG_HDL_1a 9
@@ -187,5 +93,11 @@
 #define DEBUG_ISR_hwpic2 5
 #define DEBUG_HDL_pnp 1
 #define DEBUG_HDL_pmm 1
+#define DEBUG_HDL_pcibios32 9
+#define DEBUG_HDL_apm 9
+
+#define DEBUG_unimplemented 2
+#define DEBUG_invalid 3
+#define DEBUG_thread 2
 
 #endif // config.h