X-Git-Url: http://wien.tomnetworks.com/gitweb/?a=blobdiff_plain;f=src%2FKconfig;h=b0261d90683e56d693fc933942ca0ee1d30dc374;hb=8e073829ec69ee89b3e91f4c040c96988084a526;hp=20a1a13f6b2c16f3341d1a75fb625c42803a4631;hpb=1f807fd42f4c4d175c2af1357979fdf235f0be9a;p=coreboot.git diff --git a/src/Kconfig b/src/Kconfig index 20a1a13f6..b0261d906 100644 --- a/src/Kconfig +++ b/src/Kconfig @@ -1,28 +1,20 @@ ## -## This file is part of the coreboot repair project. +## This file is part of the coreboot project. ## -## Redistribution and use in source and binary forms, with or without -## modification, are permitted provided that the following conditions -## are met: -## 1. Redistributions of source code must retain the above copyright -## notice, this list of conditions and the following disclaimer. -## 2. Redistributions in binary form must reproduce the above copyright -## notice, this list of conditions and the following disclaimer in the -## documentation and/or other materials provided with the distribution. -## 3. The name of the author may not be used to endorse or promote products -## derived from this software without specific prior written permission. +## Copyright (C) 2009-2010 coresystems GmbH ## -## THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND -## ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -## IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -## ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE -## FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -## DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -## OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -## HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -## LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -## OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -## SUCH DAMAGE. +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## mainmenu "Coreboot Configuration" @@ -47,10 +39,107 @@ config LOCALVERSION the coreboot version number, so that you can easily distinguish boot logs of different boards from each other. +config CBFS_PREFIX + string "CBFS prefix to use" + default "fallback" + help + Select the prefix to all files put into the image. It's "fallback" + by default, "normal" is a common alternative. + +choice + prompt "Compiler" + default COMPILER_GCC + help + This option allows you to select the compiler used for building + coreboot. + +config COMPILER_GCC + bool "GCC" +config COMPILER_LLVM_CLANG + bool "LLVM/clang" +endchoice + +config SCANBUILD_ENABLE + bool "Build with scan-build for static analysis" + default n + help + Changes the build process to scan-build is used. + Requires scan-build in path. + +config SCANBUILD_REPORT_LOCATION + string "Directory to put scan-build report in" + default "" + depends on SCANBUILD_ENABLE + help + Where the scan-build report should be stored + +config CCACHE + bool "ccache" + default n + help + Enables the use of ccache for faster builds. + Requires ccache in path. + +config SCONFIG_GENPARSER + bool "Generate SCONFIG parser using flex and bison" + default n + depends on EXPERT + help + Enable this option if you are working on the sconfig + device tree parser and made changes to sconfig.l and + sconfig.y. + Otherwise, say N. + +config USE_OPTION_TABLE + bool "Use CMOS for configuration values" + default n + depends on HAVE_OPTION_TABLE + help + Enable this option if coreboot shall read options from the "CMOS" + NVRAM instead of using hard coded values. + +config COMPRESS_RAMSTAGE + bool "Compress ramstage with LZMA" + default y + help + Compress ramstage to save memory in the flash image. Note + that decompression might slow down booting if the boot flash + is connected through a slow Link (i.e. SPI) + +config INCLUDE_CONFIG_FILE + bool "Include the coreboot config file into the ROM image" + default y + help + Include in CBFS the coreboot config file that was used to compile the ROM image + +config EARLY_CBMEM_INIT + bool "Initialize CBMEM while in ROM stage" + default n + help + Make coreboot initialize the cbmem structures while running in rom + stage. This could be useful when the rom stage wants to communicate + some, for instance, execution timestamps. + +config COLLECT_TIMESTAMPS + bool "Create a table of timestamps collected during boot" + depends on EARLY_CBMEM_INIT + help + Make coreboot create a table of timer id/timer value pairs to + allow measuring time spent at different phases of the boot + process. endmenu source src/mainboard/Kconfig -source src/arch/i386/Kconfig + +# This option is used to set the architecture of a mainboard to X86. +# It is usually set in mainboard/*/Kconfig. +config ARCH_X86 + bool + default n + +if ARCH_X86 +source src/arch/x86/Kconfig +endif menu "Chipset" @@ -64,49 +153,19 @@ comment "Super I/O" source src/superio/Kconfig comment "Devices" source src/devices/Kconfig +comment "Embedded Controllers" +source src/ec/Kconfig endmenu +menu "Generic Drivers" +source src/drivers/Kconfig +endmenu + config PCI_BUS_SEGN_BITS int default 0 -config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID - hex - default 0x0 - -config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID - hex - default 0x0 - -config CPU_ADDR_BITS - int - default 36 - -config XIP_ROM_BASE - hex - default 0xfffe0000 - -config XIP_ROM_SIZE - hex - default 0x20000 - -config LB_CKS_RANGE_START - int - default 49 - -config LB_CKS_RANGE_END - int - default 125 - -config LB_CKS_LOC - int - default 126 - -config LOGICAL_CPUS - bool - default y - config PCI_ROM_RUN bool default n @@ -115,26 +174,6 @@ config HEAP_SIZE hex default 0x4000 -config COREBOOT_V2 - bool - default y - -config COREBOOT_V4 - bool - default y - -config DEBUG - bool - default n - -config USE_PRINTK_IN_CAR - bool - default n - -config USE_OPTION_TABLE - bool - default n - config MAX_CPUS int default 1 @@ -147,42 +186,36 @@ config MMCONF_SUPPORT bool default n -config RAMTOP - hex - default 0x200000 - -config ATI_RAGE_XL - bool - source src/console/Kconfig -config HAVE_ACPI_RESUME - bool - default n - -config ACPI_SSDTX_NUM - int - default 0 - -config HAVE_FALLBACK_BOOT +# This should default to N and be set by SuperI/O drivers that have an UART +config HAVE_UART_IO_MAPPED bool default y -config USE_FALLBACK_IMAGE +config HAVE_UART_MEMORY_MAPPED bool - default y + default n -config HAVE_FAILOVER_BOOT +config HAVE_ACPI_RESUME bool default n -config USE_FAILOVER_IMAGE +config HAVE_ACPI_SLIC bool default n +config ACPI_SSDTX_NUM + int + default 0 + config HAVE_HARD_RESET bool + default y if BOARD_HAS_HARD_RESET default n + help + This variable specifies whether a given board has a hard_reset + function, no matter if it's provided by board code or chipset code. config HAVE_INIT_TIMER bool @@ -193,17 +226,17 @@ config HAVE_MAINBOARD_RESOURCES bool default n -config HAVE_MOVNTI +config USE_OPTION_TABLE bool default n config HAVE_OPTION_TABLE bool - default y + default n help This variable specifies whether a given board has a cmos.layout file containing NVRAM/CMOS bit definitions. - It defaults to 'y' but can be changed to 'n' in mainboard/*/Kconfig. + It defaults to 'n' but can be selected in mainboard/*/Kconfig. config PIRQ_ROUTE bool @@ -221,6 +254,10 @@ config IOAPIC bool default n +config TPM + bool + default n + # TODO: Can probably be removed once all chipsets have kconfig options for it. config VIDEO_MB int @@ -247,27 +284,6 @@ config GFXUMA # # endmenu -#TODO Remove this option or make it useful. -config HAVE_LOW_TABLES - bool - default y - help - This Option is unused in the code. Since two boards try to set it to - 'n', they may be broken. We either need to make the option useful or - get rid of it. The broken boards are: - asus/m2v-mx_se - supermicro/h8dme - -config HAVE_HIGH_TABLES - bool - default n - help - This variable specifies whether a given northbridge has high table - support. - It is set in northbridge/*/Kconfig. - Whether or not the high tables are actually written by coreboot is - configurable by the user via WRITE_HIGH_TABLES. - config HAVE_ACPI_TABLES bool help @@ -307,15 +323,14 @@ config GENERATE_PIRQ_TABLE bool default HAVE_PIRQ_TABLE -config WRITE_HIGH_TABLES +config GENERATE_SMBIOS_TABLES bool - default HAVE_HIGH_TABLES + default y menu "System tables" config WRITE_HIGH_TABLES bool "Write 'high' tables to avoid being overwritten in F segment" - depends on HAVE_HIGH_TABLES default y config MULTIBOOT @@ -350,13 +365,23 @@ config GENERATE_PIRQ_TABLE If unsure, say Y. +config GENERATE_SMBIOS_TABLES + depends on ARCH_X86 + bool "Generate SMBIOS tables" + default y + help + Generate SMBIOS tables for this board. + + If unsure, say Y. + endmenu menu "Payload" choice prompt "Add a payload" - default PAYLOAD_NONE + default PAYLOAD_NONE if !ARCH_X86 + default PAYLOAD_SEABIOS if ARCH_X86 config PAYLOAD_NONE bool "None" @@ -378,20 +403,77 @@ config PAYLOAD_ELF You will be able to specify the location and file name of the payload image later. +config PAYLOAD_SEABIOS + bool "SeaBIOS" + depends on ARCH_X86 + help + Select this option if you want to build a coreboot image + with a SeaBIOS payload. If you don't know what this is + about, just leave it enabled. + + See http://coreboot.org/Payloads for more information. + +config PAYLOAD_FILO + bool "FILO" + help + Select this option if you want to build a coreboot image + with a FILO payload. If you don't know what this is + about, just leave it enabled. + + See http://coreboot.org/Payloads for more information. + endchoice -config FALLBACK_PAYLOAD_FILE +choice + prompt "SeaBIOS version" + default SEABIOS_STABLE + depends on PAYLOAD_SEABIOS + +config SEABIOS_STABLE + bool "stable" + help + Stable SeaBIOS version +config SEABIOS_MASTER + bool "master" + help + Newest SeaBIOS version +endchoice + +choice + prompt "FILO version" + default FILO_STABLE + depends on PAYLOAD_FILO + +config FILO_STABLE + bool "0.6.0" + help + Stable FILO version +config FILO_MASTER + bool "HEAD" + help + Newest FILO version +endchoice + +config PAYLOAD_FILE string "Payload path and filename" depends on PAYLOAD_ELF default "payload.elf" help The path and filename of the ELF executable file to use as payload. +config PAYLOAD_FILE + depends on PAYLOAD_SEABIOS + default "$(obj)/seabios/out/bios.bin.elf" + +config PAYLOAD_FILE + depends on PAYLOAD_FILO + default "payloads/external/FILO/filo/build/filo.elf" + # TODO: Defined if no payload? Breaks build? config COMPRESSED_PAYLOAD_LZMA bool "Use LZMA compression for payloads" default y - depends on PAYLOAD_ELF + depends on PAYLOAD_ELF || PAYLOAD_SEABIOS || PAYLOAD_FILO help In order to reduce the size payloads take up in the ROM chip coreboot can compress them using the LZMA algorithm. @@ -413,14 +495,14 @@ config VGA_BIOS You will be able to specify the location and file name of the image later. -config FALLBACK_VGA_BIOS_FILE +config VGA_BIOS_FILE string "VGA BIOS path and filename" depends on VGA_BIOS default "vgabios.bin" help The path and filename of the file to use as VGA BIOS. -config FALLBACK_VGA_BIOS_ID +config VGA_BIOS_ID string "VGA device PCI IDs" depends on VGA_BIOS default "1106,3230" @@ -434,6 +516,72 @@ config FALLBACK_VGA_BIOS_ID the "0x" prefix) and 3230 specifies the PCI device ID of the video card (also in hex, without "0x" prefix). +config INTEL_MBI + bool "Add an MBI image" + depends on NORTHBRIDGE_INTEL_I82830 + help + Select this option if you have an Intel MBI image that you would + like to add to your ROM. + + You will be able to specify the location and file name of the + image later. + +config MBI_FILE + string "Intel MBI path and filename" + depends on INTEL_MBI + default "mbi.bin" + help + The path and filename of the file to use as VGA BIOS. + +endmenu + +menu "Display" + depends on PCI_OPTION_ROM_RUN_YABEL || PCI_OPTION_ROM_RUN_REALMODE + +config FRAMEBUFFER_SET_VESA_MODE + prompt "Set VESA framebuffer mode" + bool + depends on PCI_OPTION_ROM_RUN_YABEL || PCI_OPTION_ROM_RUN_REALMODE + help + Set VESA framebuffer mode (needed for bootsplash) + +# TODO: Turn this into a "choice". +config FRAMEBUFFER_VESA_MODE + prompt "VESA framebuffer video mode" + hex + default 0x117 + depends on FRAMEBUFFER_SET_VESA_MODE + help + This option sets the resolution used for the coreboot framebuffer (and + bootsplash screen). Set to 0x117 for 1024x768x16. A diligent soul will + some day make this a "choice". + +config FRAMEBUFFER_KEEP_VESA_MODE + prompt "Keep VESA framebuffer" + bool + depends on PCI_OPTION_ROM_RUN_YABEL || PCI_OPTION_ROM_RUN_REALMODE + help + This option keeps the framebuffer mode set after coreboot finishes + execution. If this option is enabled, coreboot will pass a + framebuffer entry in its coreboot table and the payload will need a + framebuffer driver. If this option is disabled, coreboot will switch + back to text mode before handing control to a payload. + +config BOOTSPLASH + prompt "Show graphical bootsplash" + bool + depends on FRAMEBUFFER_SET_VESA_MODE + help + This option shows a graphical bootsplash screen. The grapics are + loaded from the CBFS file bootsplash.jpg. + +config BOOTSPLASH_FILE + string "Bootsplash path and filename" + depends on BOOTSPLASH + default "bootsplash.jpg" + help + The path and filename of the file to use as graphical bootsplash + screen. The file format has to be jpg. endmenu menu "Debugging" @@ -441,11 +589,313 @@ menu "Debugging" # TODO: Better help text and detailed instructions. config GDB_STUB bool "GDB debugging support" - default y + default n help If enabled, you will be able to set breakpoints for gdb debugging. - See src/arch/i386/lib/c_start.S for details. + See src/arch/x86/lib/c_start.S for details. + +config HAVE_DEBUG_RAM_SETUP + def_bool n + +config DEBUG_RAM_SETUP + bool "Output verbose RAM init debug messages" + default n + depends on HAVE_DEBUG_RAM_SETUP + help + This option enables additional RAM init related debug messages. + It is recommended to enable this when debugging issues on your + board which might be RAM init related. + + Note: This option will increase the size of the coreboot image. + + If unsure, say N. + +config HAVE_DEBUG_CAR + def_bool n + +config DEBUG_CAR + def_bool n + depends on HAVE_DEBUG_CAR + +if DEFAULT_CONSOLE_LOGLEVEL_7 || DEFAULT_CONSOLE_LOGLEVEL_8 +# Only visible if debug level is DEBUG (7) or SPEW (8) as it does additional +# printk(BIOS_DEBUG, ...) calls. +config DEBUG_CAR + bool "Output verbose Cache-as-RAM debug messages" + default n + depends on HAVE_DEBUG_CAR + help + This option enables additional CAR related debug messages. +endif + +config DEBUG_PIRQ + bool "Check PIRQ table consistency" + default n + depends on GENERATE_PIRQ_TABLE + help + If unsure, say N. + +config HAVE_DEBUG_SMBUS + def_bool n + +config DEBUG_SMBUS + bool "Output verbose SMBus debug messages" + default n + depends on HAVE_DEBUG_SMBUS + help + This option enables additional SMBus (and SPD) debug messages. + + Note: This option will increase the size of the coreboot image. + + If unsure, say N. + +config DEBUG_SMI + bool "Output verbose SMI debug messages" + default n + depends on HAVE_SMI_HANDLER + help + This option enables additional SMI related debug messages. + + Note: This option will increase the size of the coreboot image. + + If unsure, say N. + +config DEBUG_SMM_RELOCATION + bool "Debug SMM relocation code" + default n + depends on HAVE_SMI_HANDLER + help + This option enables additional SMM handler relocation related + debug messages. + + Note: This option will increase the size of the coreboot image. + + If unsure, say N. + +config DEBUG_MALLOC + def_bool n + +# Only visible if debug level is DEBUG (7) or SPEW (8) as it does additional +# printk(BIOS_DEBUG, ...) calls. +if DEFAULT_CONSOLE_LOGLEVEL_7 || DEFAULT_CONSOLE_LOGLEVEL_8 +config DEBUG_MALLOC + bool "Output verbose malloc debug messages" + default n + help + This option enables additional malloc related debug messages. + + Note: This option will increase the size of the coreboot image. + + If unsure, say N. +endif + +config DEBUG_ACPI + def_bool n + +# Only visible if debug level is DEBUG (7) or SPEW (8) as it does additional +# printk(BIOS_DEBUG, ...) calls. +if DEFAULT_CONSOLE_LOGLEVEL_7 || DEFAULT_CONSOLE_LOGLEVEL_8 +config DEBUG_ACPI + bool "Output verbose ACPI debug messages" + default n + help + This option enables additional ACPI related debug messages. + + Note: This option will slightly increase the size of the coreboot image. + + If unsure, say N. +endif + +config REALMODE_DEBUG + def_bool n + depends on PCI_OPTION_ROM_RUN_REALMODE + +if DEFAULT_CONSOLE_LOGLEVEL_7 || DEFAULT_CONSOLE_LOGLEVEL_8 +# Only visible if debug level is DEBUG (7) or SPEW (8) as it does additional +# printk(BIOS_DEBUG, ...) calls. +config REALMODE_DEBUG + bool "Enable debug messages for option ROM execution" + default n + depends on PCI_OPTION_ROM_RUN_REALMODE + help + This option enables additional x86emu related debug messages. + + Note: This option will increase the time to emulate a ROM. + + If unsure, say N. +endif + +config X86EMU_DEBUG + bool "Output verbose x86emu debug messages" + default n + depends on PCI_OPTION_ROM_RUN_YABEL + help + This option enables additional x86emu related debug messages. + + Note: This option will increase the size of the coreboot image. + + If unsure, say N. + +config X86EMU_DEBUG_JMP + bool "Trace JMP/RETF" + default n + depends on X86EMU_DEBUG + help + Print information about JMP and RETF opcodes from x86emu. + + Note: This option will increase the size of the coreboot image. + + If unsure, say N. + +config X86EMU_DEBUG_TRACE + bool "Trace all opcodes" + default n + depends on X86EMU_DEBUG + help + Print _all_ opcodes that are executed by x86emu. + + WARNING: This will produce a LOT of output and take a long time. + Note: This option will increase the size of the coreboot image. + + If unsure, say N. + +config X86EMU_DEBUG_PNP + bool "Log Plug&Play accesses" + default n + depends on X86EMU_DEBUG + help + Print Plug And Play accesses made by option ROMs. + + Note: This option will increase the size of the coreboot image. + + If unsure, say N. + +config X86EMU_DEBUG_DISK + bool "Log Disk I/O" + default n + depends on X86EMU_DEBUG + help + Print Disk I/O related messages. + + Note: This option will increase the size of the coreboot image. + + If unsure, say N. + +config X86EMU_DEBUG_PMM + bool "Log PMM" + default n + depends on X86EMU_DEBUG + help + Print messages related to POST Memory Manager (PMM). + + Note: This option will increase the size of the coreboot image. + + If unsure, say N. + + +config X86EMU_DEBUG_VBE + bool "Debug VESA BIOS Extensions" + default n + depends on X86EMU_DEBUG + help + Print messages related to VESA BIOS Extension (VBE) functions. + + Note: This option will increase the size of the coreboot image. + + If unsure, say N. + +config X86EMU_DEBUG_INT10 + bool "Redirect INT10 output to console" + default n + depends on X86EMU_DEBUG + help + Let INT10 (i.e. character output) calls print messages to debug output. + + Note: This option will increase the size of the coreboot image. + + If unsure, say N. + +config X86EMU_DEBUG_INTERRUPTS + bool "Log intXX calls" + default n + depends on X86EMU_DEBUG + help + Print messages related to interrupt handling. + + Note: This option will increase the size of the coreboot image. + + If unsure, say N. + +config X86EMU_DEBUG_CHECK_VMEM_ACCESS + bool "Log special memory accesses" + default n + depends on X86EMU_DEBUG + help + Print messages related to accesses to certain areas of the virtual + memory (e.g. BDA (BIOS Data Area) or interrupt vectors) + + Note: This option will increase the size of the coreboot image. + + If unsure, say N. + +config X86EMU_DEBUG_MEM + bool "Log all memory accesses" + default n + depends on X86EMU_DEBUG + help + Print memory accesses made by option ROM. + Note: This also includes accesses to fetch instructions. + + Note: This option will increase the size of the coreboot image. + + If unsure, say N. + +config X86EMU_DEBUG_IO + bool "Log IO accesses" + default n + depends on X86EMU_DEBUG + help + Print I/O accesses made by option ROM. + + Note: This option will increase the size of the coreboot image. + + If unsure, say N. + +config DEBUG_TPM + bool "Output verbose TPM debug messages" + default n + depends on TPM + help + This option enables additional TPM related debug messages. + +if SOUTHBRIDGE_INTEL_BD82X6X && DEFAULT_CONSOLE_LOGLEVEL_8 +# Only visible with the right southbridge and loglevel. +config DEBUG_INTEL_ME + bool "Verbose logging for Intel Management Engine" + default n + help + Enable verbose logging for Intel Management Engine driver that + is present on Intel 6-series chipsets. +endif + +config LLSHELL + bool "Built-in low-level shell" + default n + help + If enabled, you will have a low level shell to examine your machine. + Put llshell() in your (romstage) code to start the shell. + See src/arch/x86/llshell/llshell.inc for details. + +config TRACE + bool "Trace function calls" + default n + help + If enabled, every function will print information to console once + the function is entered. The syntax is ~0xaaaabbbb(0xccccdddd) + the 0xaaaabbbb is the actual function and 0xccccdddd is EIP + of calling function. Please note some printk releated functions + are omitted from trace to have good looking console dumps. endmenu config LIFT_BSP_APIC_ID @@ -457,7 +907,7 @@ config AP_CODE_IN_CAR bool default n -config USE_INIT +config RAMINIT_SYSINFO bool default n @@ -467,8 +917,46 @@ config ENABLE_APIC_EXT_ID config WARNINGS_ARE_ERRORS bool - default n + default y -config ID_SECTION_OFFSET - hex - default 0x10 +# The four POWER_BUTTON_DEFAULT_ENABLE, POWER_BUTTON_DEFAULT_DISABLE, +# POWER_BUTTON_FORCE_ENABLE and POWER_BUTTON_FORCE_DISABLE options are +# mutually exclusive. One of these options must be selected in the +# mainboard Kconfig if the chipset supports enabling and disabling of +# the power button. Chipset code uses the ENABLE_POWER_BUTTON option set +# in mainboard/Kconfig to know if the button should be enabled or not. + +config POWER_BUTTON_DEFAULT_ENABLE + def_bool n + help + Select when the board has a power button which can optionally be + disabled by the user. + +config POWER_BUTTON_DEFAULT_DISABLE + def_bool n + help + Select when the board has a power button which can optionally be + enabled by the user, e.g. when the board ships with a jumper over + the power switch contacts. + +config POWER_BUTTON_FORCE_ENABLE + def_bool n + help + Select when the board requires that the power button is always + enabled. + +config POWER_BUTTON_FORCE_DISABLE + def_bool n + help + Select when the board requires that the power button is always + disabled, e.g. when it has been hardwired to ground. + +config POWER_BUTTON_IS_OPTIONAL + bool + default y if POWER_BUTTON_DEFAULT_ENABLE || POWER_BUTTON_DEFAULT_DISABLE + default n if !(POWER_BUTTON_DEFAULT_ENABLE || POWER_BUTTON_DEFAULT_DISABLE) + help + Internal option that controls ENABLE_POWER_BUTTON visibility. + +source src/Kconfig.deprecated_options +source src/vendorcode/Kconfig