X-Git-Url: http://wien.tomnetworks.com/gitweb/?a=blobdiff_plain;f=src%2FKconfig;h=100ab928195939892f926ac01b49d06f2d137422;hb=31eabf9ba842612e7c525489ab2a6b60bba10ea0;hp=3133d8861598467a312ab5e04cd84857dad405ee;hpb=f31171c11f500c8818a1628ff1b4908a97eb6a85;p=seabios.git

diff --git a/src/Kconfig b/src/Kconfig
index 3133d88..100ab92 100644
--- a/src/Kconfig
+++ b/src/Kconfig
@@ -10,6 +10,13 @@ menu "General Features"
         help
             Configure as a coreboot payload.
 
+    config XEN
+        depends on !COREBOOT
+        bool "Build for Xen HVM"
+        default n
+        help
+            Configure to be used by xen hvmloader, for a HVM guest.
+
     config THREADS
         bool "Parallelize hardware init"
         default y
@@ -39,18 +46,19 @@ menu "General Features"
         default y
         help
             Support an interactive boot menu at end of post.
-    config BOOTMENU_WAIT
-        depends on BOOTMENU
-        int "Bootmenu delay"
-        default 2500
-        help
-            Amount of time (in ms) to wait at menu before selecting normal boot.
     config BOOTSPLASH
         depends on BOOTMENU
         bool "Graphical boot splash screen"
         default y
         help
             Support showing a graphical boot splash screen.
+    config BOOTORDER
+        depends on BOOT
+        bool "Boot ordering"
+        default y
+        help
+            Support controlling of the boot order via the fw_cfg/CBFS
+            "bootorder" file.
 
     config COREBOOT_FLASH
         depends on COREBOOT
@@ -96,15 +104,15 @@ menu "Hardware support"
     config AHCI
         depends on DRIVES
         bool "AHCI controllers"
-        default n
+        default y
         help
             Support for AHCI disk code.
     config VIRTIO_BLK
         depends on DRIVES && !COREBOOT
-        bool "VirtIO controllers"
+        bool "virtio-blk controllers"
         default y
         help
-            Support boot from virtio storage.
+            Support boot from virtio-blk storage.
     config FLOPPY
         depends on DRIVES
         bool "Floppy controller"
@@ -178,21 +186,6 @@ menu "Hardware support"
         help
             Support parallel ports. This also enables int 17 parallel port calls.
 
-    config EXTRA_PCI_ROOTS
-        bool "Extra root buses"
-        default n
-        help
-            If the target machine has multiple independent root buses,
-            the extra buses may be specified here.
-    config PCI_ROOT1
-        depends on EXTRA_PCI_ROOTS
-        hex "Extra primary PCI root bus number"
-        default 0x00
-    config PCI_ROOT2
-        depends on EXTRA_PCI_ROOTS
-        hex "Extra secondary PCI root bus number"
-        default 0x00
-
     config USE_SMM
         depends on !COREBOOT
         bool "System Management Mode (SMM)"
@@ -255,17 +248,6 @@ menu "BIOS interfaces"
             Select this if option ROMs are already copied to
             0xc0000-0xf0000.  This must only be selected when using
             Bochs or QEMU versions older than 0.12.
-    config OPTIONROMS_CHECKSUM
-        depends on OPTIONROMS
-        bool "Require correct checksum on option ROMs"
-        default y
-        help
-            Option ROMs are required to have correct checksums.
-            However, some option ROMs in the wild don't correctly
-            follow the specifications and have bad checksums.
-            Say N here to allow SeaBIOS to execute them anyways.
-
-            If unsure, say Y.
     config PMM
         depends on OPTIONROMS
         bool "PMM interface"
@@ -299,12 +281,6 @@ menu "BIOS interfaces"
         default y
         help
             Support S3 resume handler.
-    config S3_RESUME_VGA_INIT
-        depends on S3_RESUME
-        bool "Run VGA rom on S3 resume"
-        default n
-        help
-            Run the vga rom during S3 resume.
 
     config VGAHOOKS
         depends on COREBOOT
@@ -348,6 +324,53 @@ menu "BIOS Tables"
             Support generation of ACPI tables.
 endmenu
 
+menu "VGA ROM"
+    config VGA_CIRRUS
+        bool "QEMU Cirrus CLGD 54xx VGA BIOS"
+        default n
+        help
+            Build support for Cirrus VGA emulation.
+
+    config VGA_BOCHS
+        bool "Bochs DISPI interface VGA BIOS"
+        default n
+        help
+            Build support for Bochs DISPI interface
+
+    config VGA_GEODELX
+        bool "GeodeLX interface VGA BIOS"
+        default n
+        help
+            Build support for Geode LX vga
+
+    config VGA_PCI
+        bool "PCI ROM Headers"
+        default y
+        help
+            Build PCI ROM headers so the vga rom can be extracted from
+            a PCI device.
+
+    config VGA_VID
+        depends on VGA_PCI
+        hex "PCI Vendor ID"
+        default 0x1013 if VGA_CIRRUS
+        default 0x1234 if VGA_BOCHS
+        default 0x1022 if VGA_GEODELX
+        default 0x0000
+        help
+            Vendor ID for the PCI ROM
+
+    config VGA_DID
+        depends on VGA_PCI
+        hex "PCI Device ID"
+        default 0x00b8 if VGA_CIRRUS
+        default 0x1111 if VGA_BOCHS
+        default 0x2081 if VGA_GEODELX
+        default 0x0000
+        help
+            Device ID for the PCI ROM
+endmenu
+
 menu "Debugging"
     config DEBUG_LEVEL
         int "Debug level"
@@ -364,12 +387,10 @@ menu "Debugging"
         default n
         help
             Send debugging information to serial port.
-
-    config SCREEN_AND_DEBUG
-        depends on DEBUG_LEVEL != 0
-        bool "Show screen writes on debug ports"
-        default y
+    config DEBUG_SERIAL_PORT
+        depends on DEBUG_SERIAL
+        hex "Serial port base address"
+        default 0x3f8
         help
-            Send characters that SeaBIOS writes to the screen to the
-            debug ports.
+            Base port for serial - generally 0x3f8, 0x2f8, 0x3e8, or 0x2e8.
 endmenu