/*
- * This file is part of the LinuxBIOS project.
+ * This file is part of the superiotool project.
*
* Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
*
#include "superiotool.h"
-#define DEVICE_ID_REG 0x20
-#define DEVICE_REV_REG 0x21
+#define DEVICE_ID_REG_OLD 0x09
+
+#define DEVICE_ID_REG 0x20
+#define DEVICE_REV_REG 0x21
/**
* The ID entries must be in 0xYYZ format, where YY is the device ID,
* and Z is bits 7..4 of the device revision register. We do not match
- * bits 3..0 of the device revision here.
+ * bits 3..0 of the device revision here (at least for newer Super I/Os).
+ *
+ * But some of the older versions use both bytes (0x20 and 0x21), where
+ * register 0x21 holds the ID and the full 8 bits of 0x21 hold the revision.
+ *
+ * Some other Super I/Os only use bits 3..0 of 0x09 as ID.
*/
-const static struct superio_registers reg_table[] = {
- {0x601, "W83697HF/F", {
+static const struct superio_registers reg_table[] = {
+ /* ID and rev[3..0] */
+ {0x527, "W83977CTF", { /* TODO: Not yet in sensors-detect */
+ {EOT}}},
+ {0x52f, "W83977EF/EG", {/* TODO: Not yet in sensors-detect */
+ {EOT}}},
+ {0x595, "W83627SF", { /* TODO: Not yet in sensors-detect */
+ {EOT}}},
+ {0x601, "W83697HF/F/HG", { /* No G version? */
{NOLDN, NULL,
{0x07,0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x28,0x29,
0x2a,EOT},
{0x30,0x60,0x61,0x70,EOT},
{0x00,0x00,0x00,0x00,EOT}},
{EOT}}},
- {0x886, "W83627EHF/EF/EHG/EG", {
+ {0x610, "W83L517D/D-F", {
+ {EOT}}},
+ {0x708, "W83637HF/HG", {
+ {EOT}}},
+ {0x828, "W83627THF/THG", { /* We assume rev is bits 3..0 of 0x21. */
+ {NOLDN, NULL,
+ {0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x28,0x29,0x2a,
+ 0x2b,0x2c,0x2d,0x2e,0x2f,EOT},
+ {0x82,NANA,0xff,0x00,MISC,0x00,MISC,0x00,0x00,0x00,
+ MISC,MISC,MISC,0x00,0x00,EOT}},
+ /* Some register defaults depend on the value of PNPCSV. */
+ {0x0, "Floppy",
+ {0x30,0x60,0x61,0x70,0x74,0xf0,0xf1,0xf2,0xf4,
+ 0xf5,EOT},
+ {0x01,0x03,0xf0,0x06,0x02,0x0e,0x00,0xff,0x00,
+ 0x00,EOT}},
+ {0x1, "Parallel port",
+ {0x30,0x60,0x61,0x70,0x74,0xf0,EOT},
+ {0x01,0x03,0x78,0x07,0x04,0x3f,EOT}},
+ {0x2, "COM1",
+ {0x30,0x60,0x61,0x70,0xf0,EOT},
+ {0x01,0x03,0xf8,0x04,0x00,EOT}},
+ {0x3, "COM2",
+ {0x30,0x60,0x61,0x70,0xf0,0xf1,EOT},
+ {0x01,0x02,0xf8,0x03,0x00,0x00,EOT}},
+ {0x5, "Keyboard",
+ {0x30,0x60,0x61,0x62,0x63,0x70,0x72,0xf0,EOT},
+ {0x01,0x00,0x60,0x00,0x64,0x01,0x0c,0x80,EOT}},
+ {0x7, "GPIO 1, GPIO 5, game port, MIDI port",
+ {0x30,0x60,0x61,0x62,0x63,0x70,0xf0,0xf1,0xf2,0xf3,
+ 0xf4,0xf5,EOT},
+ {0x00,0x02,0x01,0x03,0x30,0x09,0xff,0x00,0x00,0xff,
+ 0x00,0x00,EOT}},
+ {0x8, "GPIO 2",
+ {0x30,0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7,EOT},
+ {0x00,0xff,0x00,0x00,0x00,RSVD,0x00,0x00,0x00,EOT}},
+ {0x9, "GPIO 3, GPIO 4",
+ {0x30,0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,EOT},
+ {0x00,0xff,0x00,0x00,0x00,0xff,0x00,0x00,EOT}},
+ {0xa, "ACPI",
+ /* Note: Datasheet says 0xe2 can't be read/written. */
+ {0x30,0x70,0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7,
+ 0xf0,0xf1,0xf3,0xf4,0xf6,0xf7,0xf9,0xfe,0xff,EOT},
+ {0x00,0x00,0x00,0x00,MISC,MISC,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,RSVD,RSVD,EOT}},
+ {0xb, "Hardware monitor",
+ {0x30,0x60,0x61,0x70,EOT},
+ {0x00,0x00,0x00,0x00,EOT}},
+ {EOT}}},
+#if 0
+ {0x85x, "W83687THF", { /* TODO: sensors-detect: 0x85 */
+ {EOT}}},
+#endif
+ {0xa02, "W83627DHG", {
+ {NOLDN, NULL,
+ {0x02,0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27,0x28,
+ 0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f,EOT},
+ {0x00,0xa0,NANA,0xff,0x00,MISC,0x00,MISC,RSVD,0x50,
+ 0x00,0x00,RSVD,0xe2,0x21,0x00,0x00,EOT}},
+ {0x0, "Floppy",
+ {0x30,0x60,0x61,0x70,0x74,0xf0,0xf1,0xf2,0xf4,0xf5,
+ EOT},
+ {0x01,0x03,0xf0,0x06,0x02,0x8e,0x00,0xff,0x00,0x00,
+ EOT}},
+ {0x1, "Parallel port",
+ {0x30,0x60,0x61,0x70,0x74,0xf0,EOT},
+ {0x01,0x03,0x78,0x07,0x04,0x3f,EOT}},
+ {0x2, "COM1",
+ {0x30,0x60,0x61,0x70,0xf0,EOT},
+ {0x01,0x03,0xf8,0x04,0x00,EOT}},
+ {0x3, "COM2",
+ {0x30,0x60,0x61,0x70,0xf0,0xf1,EOT},
+ {0x01,0x02,0xf8,0x03,0x00,0x00,EOT}},
+ {0x5, "Keyboard",
+ {0x30,0x60,0x61,0x62,0x63,0x70,0x72,0xf0,EOT},
+ {0x01,0x00,0x60,0x00,0x64,0x01,0x0c,0x83,EOT}},
+ {0x6, "Serial peripheral interface",
+ {0x30,0x62,0x63,EOT},
+ {0x00,0x00,0x00,EOT}},
+ {0x7, "GPIO 6",
+ {0x30,0xf4,0xf5,0xf6,0xf7,EOT},
+ {0x00,0xff,0x00,0x00,0x00,EOT}},
+ {0x8, "WDTO#, PLED",
+ {0x30,0xf5,0xf6,0xf7,EOT},
+ {0x00,0x00,0x00,0x00,EOT}},
+ {0x9, "GPIO 2, GPIO 3, GPIO 4, GPIO 5",
+ {0x30,0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7,0xe8,
+ 0xe9,0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7,0xfe,
+ EOT},
+ {0x00,0xff,0x00,0x00,0xff,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0xff,0x00,0x00,0x00,0xff,0x00,0x00,0x00,0x00,
+ EOT}},
+ {0xa, "ACPI",
+ {0x30,0x70,0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7,
+ 0xe8,0xe9,0xf2,0xf3,0xf4,0xf6,0xf7,0xfe,EOT},
+ {0x00,0x00,0x01,0x00,0xff,0x08,0x00,RSVD,0x1c,0x00,
+ RSVD,RSVD,0x7c,0x00,0x00,0x00,0x00,0x00,EOT}},
+ {0xb, "Hardware monitor",
+ {0x30,0x60,0x61,0x70,0xf0,0xf1,0xf2,EOT},
+ {0x00,0x00,0x00,0x00,0x81,0x00,0x00,EOT}},
+ {0xc, "PECI, SST",
+ {0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe8,0xf1,0xfe,0xff,
+ EOT},
+ {0x00,0x48,0x48,0x48,0x48,0x00,0x00,0x48,0x00,0x00,
+ EOT}},
+ {EOT}}},
+ {0xa23, "W83627UHG", {/* TODO: Not yet in sensors-detect */
+ {EOT}}},
+
+ /* ID and rev */
+ {0x9771, "W83977F-A/G-A/AF-A/AG-A", {
+ {EOT}}},
+ {0x9777, "W83977AF", {
+ /* W83977AF as found on the Advantech PCM-5820. We weren't able
+ * to find a datasheet (so far) which lists the 0x77 revision,
+ * but the hardware is there in the wild, so detect it...
+ */
+ {EOT}}},
+ {0x9773, "W83977TF", {
+ {NOLDN, NULL,
+ {0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x28,0x2a,0x2b,
+ 0x2c,0x2d,0x2e,0x2f,EOT},
+ {0x97,0x73,0xff,0xfe,MISC,0x00,MISC,0x00,0x00,0x00,
+ 0x00,RSVD,RSVD,RSVD,EOT}},
+ {0x0, "Floppy",
+ {0x30,0x60,0x61,0x70,0x74,0xf0,0xf1,0xf2,0xf4,0xf5,
+ EOT},
+ {0x01,0x03,0xf0,0x06,0x02,0x0e,0x00,0xff,0x00,0x00,
+ EOT}},
+ {0x1, "Parallel port",
+ {0x30,0x60,0x61,0x70,0x74,0xf0,EOT},
+ {0x01,0x03,0x78,0x07,0x04,0x3f,EOT}},
+ {0x2, "COM1",
+ {0x30,0x60,0x61,0x70,0xf0,EOT},
+ {0x01,0x03,0xf8,0x04,0x00,EOT}},
+ {0x3, "COM2",
+ {0x30,0x60,0x61,0x70,0xf0,0xf1,EOT},
+ {0x01,0x02,0xf8,0x03,0x00,0x00,EOT}},
+ {0x5, "Keyboard / mouse",
+ {0x30,0x60,0x61,0x62,0x63,0x70,0x72,0xf0,EOT},
+ {0x01,0x00,0x60,0x00,0x64,0x01,0x0c,0x83,EOT}},
+ {0x7, "GPIO 1",
+ {0x30,0x60,0x61,0x62,0x63,0x64,0x65,0x70,0x72,0xe0,
+ 0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7,0xf1,EOT},
+ {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,
+ 0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x00,EOT}},
+ {0x8, "GPIO 2",
+ {0x30,0x60,0x61,0x70,0x72,0xe8,0xe9,0xea,0xeb,0xec,
+ 0xed,0xee,0xf0,0xf1,0xf2,0xf3,0xf4,EOT},
+ {0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,
+ 0x01,0x01,0x00,RSVD,0x00,0x00,0x00,EOT}},
+ {0x9, "GPIO 3",
+ {0x30,0x60,0x61,0x62,0x63,0x64,0x65,0x70,0x72,0xe0,
+ 0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7,0xf1,EOT},
+ {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,
+ 0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x00,EOT}},
+ {0xa, "ACPI",
+ {0x30,0x60,0x61,0x62,0x63,0x64,0x65,0x70,0xe0,0xe1,
+ 0x02,0xe3,0xe4,0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,
+ 0xf7,0xfe,0xff,EOT},
+ {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ NANA,MISC,RSVD,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,RSVD,RSVD,EOT}},
+ {EOT}}},
+ {0x9774, "W83977ATF", {
+ {EOT}}},
+
+ /* ID only */
+ {0x52, "W83627HF/F/HG/G", {
+ {NOLDN, NULL,
+ {0x02,0x07,0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x28,
+ 0x29,0x2a,0x2b,0x2c,0x2e,0x2f,EOT},
+ {0x00,NANA,0x52,NANA,0xff,0x00,MISC,0x00,0x00,0x00,
+ 0x00,0x7c,0xc0,0x00,0x00,0x00,EOT}},
+ {0x0, "Floppy",
+ {0x30,0x60,0x61,0x70,0x74,0xf0,0xf1,0xf2,0xf4,
+ 0xf5,EOT},
+ {0x01,0x03,0xf0,0x06,0x02,0x0e,0x00,0xff,0x00,
+ 0x00,EOT}},
+ {0x1, "Parallel port",
+ {0x30,0x60,0x61,0x70,0x74,0xf0,EOT},
+ {0x01,0x03,0x78,0x07,0x04,0x3f,EOT}},
+ {0x2, "COM1",
+ {0x30,0x60,0x61,0x70,0xf0,EOT},
+ {0x01,0x03,0xf8,0x04,0x00,EOT}},
+ {0x3, "COM2",
+ {0x30,0x60,0x61,0x70,0xf0,0xf1,EOT},
+ {0x01,0x02,0xf8,0x03,0x00,0x00,EOT}},
+ {0x5, "Keyboard",
+ {0x30,0x60,0x61,0x62,0x63,0x70,0x72,0xf0,EOT},
+ {0x01,0x00,0x60,0x00,0x64,0x01,0x0c,0x80,EOT}},
+ {0x6, "Consumer IR",
+ {0x30,0x60,0x61,0x70,EOT},
+ {0x00,0x00,0x00,0x00,EOT}},
+ {0x7, "Game port, MIDI port, GPIO 1",
+ {0x30,0x60,0x61,0x62,0x63,0x70,0xf0,0xf1,0xf2,EOT},
+ {0x00,0x02,0x01,0x03,0x30,0x09,0xff,0x00,0x00,EOT}},
+ {0x8, "GPIO 2, Watchdog timer",
+ {0x30,0xf0,0xf1,0xf2,0xf3,0xf5,0xf6,0xf6,0xf7,EOT},
+ {0x00,0xff,0x00,0x00,0x00,0x00,0x00,0x00,0x00,EOT}},
+ {0x9, "GPIO 3",
+ {0x30,0xf0,0xf1,0xf2,0xf3,EOT},
+ {0x00,0xff,0x00,0x00,0x00,EOT}},
+ {0xa, "ACPI",
+ {0x30,0x70,0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7,
+ 0xf0,0xf1,0xf3,0xf4,0xf6,0xf7,0xf9,0xfe,0xff,EOT},
+ {0x00,0x00,0x00,0x00,NANA,NANA,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,EOT}},
+ {0xb, "Hardware monitor",
+ {0x30,0x60,0x61,0x70,0xf0,EOT},
+ {0x00,0x00,0x00,0x00,0x00,EOT}},
+ {EOT}}},
+ {0x68, "W83697SF/UF/UG", {
+ /* ID: 0x68 (for W83697SF/UF/UG)
+ * Rev: 0x1X (for W83697SF)
+ * 0x0X (for W83697SF) -- sic!
+ * 0x1X (for W83697UF/UG)
+ */
+ {NOLDN, NULL,
+ {0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x28,0x29,0x2a,
+ 0x2b,0x2c,EOT},
+ {0x68,NANA,0xef,0xfe,MISC,0x00,0x00,0x00,0x00,MISC,
+ 0x00,0x30,EOT}},
+ {0x0, "Floppy",
+ {0x30,0x60,0x61,0x70,0x74,0xf0,0xf1,0xf2,0xf4,0xf5,
+ EOT},
+ {0x01,0x03,0xf0,0x06,0x02,0x0e,0x00,0xff,0x00,0x00,
+ EOT}},
+ {0x1, "Parallel port",
+ {0x30,0x60,0x61,0x70,0x74,0xf0,EOT},
+ {0x01,0x03,0x78,0x07,0x03,0x3f,EOT}},
+ {0x2, "COM1",
+ {0x30,0x60,0x61,0x70,0xf0,EOT},
+ {0x01,0x03,0xf8,0x04,0x00,EOT}},
+ {0x3, "COM2",
+ {0x30,0x60,0x61,0x70,0xf0,0xf1,EOT},
+ {0x01,0x02,0xf8,0x03,0x00,0x00,EOT}},
+ {0x7, "Game port, GPIO 1",
+ {0x30,0x60,0x61,0x62,0x63,0xf0,0xf1,0xf2,EOT},
+ {0x00,0x02,0x01,0x00,0x00,0xff,0x00,0x00,EOT}},
+ {0x8, "MIDI port, GPIO 5",
+ {0x30,0x60,0x61,0x62,0x63,0x70,0xf0,0xf1,0xf2,0xf3,
+ 0xf4,0xf5,EOT},
+ {0x00,0x03,0x30,0x00,0x00,0x09,0xff,0x00,0x00,0x00,
+ 0x00,0x00,EOT}},
+ {0x9, "GPIO 2, GPIO 3, GPIO 4",
+ {0x30,0x60,0x61,0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,
+ 0xf7,0xf8,EOT},
+ {0x00,0x00,0x00,0xff,0x00,0x00,0xff,0x00,0x00,0xff,
+ 0x00,0x00,EOT}},
+ {0xa, "ACPI",
+ {0x30,0x70,0xf0,0xf1,0xf2,0xf3,0xf4,0xf6,0xf7,0xf9,
+ 0xfa,EOT},
+ {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,EOT}},
+ {0xb, "PWM",
+ {0x30,0x60,0x61,EOT},
+ {0x00,0x00,0x00,EOT}},
+ {0xc, "Smart card",
+ {0x30,0x60,0x61,0x70,0xf0,EOT},
+ {0x00,0x00,0x00,0x00,0x00,EOT}},
+ {0xd, "URC, GPIO 6",
+ {0x30,0x60,0x61,0x62,0x63,0x70,0xf0,0xf1,0xf2,0xf3,
+ 0xf4,EOT},
+ {0x00,0x03,0xe8,0x00,0x00,0x00,0x00,0xff,0x00,0x00,
+ 0x00,EOT}},
+ {0xe, "URD, GPIO 7",
+ {0x30,0x60,0x61,0x62,0x63,0x70,0xf0,0xf1,0xf2,0xf3,
+ EOT},
+ {0x00,0x02,0xe8,0x00,0x00,0x00,0x00,0xff,0x00,0x00,
+ EOT}},
+ {0xf, "GPIO 8",
+ {0x30,0x60,0x61,0xf0,0xf1,0xf2,EOT},
+ {0x00,0x00,0x00,0xff,0x00,0x00,EOT}},
+ {EOT}}},
+ {0x88, "W83627EHF/EF/EHG/EG", {
+ /*
+ * As per datasheet the ID should be 0x886? here.
+ * Not mentioned in the datasheet, but sensors-detect says
+ * 0x8853 is also possible. Also, the ASUS A8V-E Deluxe
+ * (W83627EHF) has an ID of 0x8854 (verified on hardware).
+ * So we now assume all 0x88?? IDs to mean W83627EHF/EF/EHG/EG.
+ */
{NOLDN, NULL,
{0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27,0x28,
0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f,EOT},
{0x30,0x60,0x61,0x70,0xf0,0xf1,EOT},
{0x00,0x00,0x00,0x00,0xc1,0x00,EOT}},
{EOT}}},
+
+ /* ID[3..0] */
+ {0xa, "W83877F", {
+ {EOT}}},
+ {0xc, "W83877TF", {
+ {EOT}}},
+ {0xd, "W83877ATF", {
+ {EOT}}},
{EOT}
};
-static void enter_conf_mode_winbond(uint16_t port)
+static void enter_conf_mode_winbond_88(uint16_t port)
{
- outb(0x87, port);
- outb(0x87, port);
+ outb(0x88, port);
}
-static void exit_conf_mode_winbond(uint16_t port)
+static void enter_conf_mode_winbond_89(uint16_t port)
{
- outb(0xaa, port);
+ outb(0x89, port);
}
-void probe_idregs_winbond(uint16_t port)
+static void enter_conf_mode_winbond_86(uint16_t port)
+{
+ outb(0x86, port);
+ outb(0x86, port);
+}
+
+static void probe_idregs_winbond_helper(const char *init, uint16_t port)
{
uint16_t id;
- uint8_t devid, rev;
+ uint8_t devid, rev, olddevid;
- enter_conf_mode_winbond(port);
+ probing_for("Winbond", init, port);
devid = regval(port, DEVICE_ID_REG);
rev = regval(port, DEVICE_REV_REG);
+ olddevid = regval(port, DEVICE_ID_REG_OLD) & 0x0f;
- /* Bits 3..0 of 'rev' form the IC version, we don't match that. */
- id = (devid << 4) | ((rev & 0xf0) >> 4);
+ if (devid == 0x52 || devid == 0x68 || devid == 0x88)
+ id = devid; /* ID only */
+ else if ((devid == 0x97) && ((rev & 0xf0) == 0x70))
+ id = (devid << 8) | rev; /* ID and rev */
+ else
+ id = (devid << 4) | ((rev & 0xf0) >> 4); /* ID and rev[3..0] */
+
+ if (olddevid == 0x0a || olddevid == 0x0c || olddevid == 0x0d)
+ id = olddevid & 0x0f; /* ID[3..0] */
if (superio_unknown(reg_table, id)) {
- no_superio_found(port);
- exit_conf_mode_winbond(port);
+ if (verbose)
+ printf(NOTFOUND "id/oldid=0x%02x/0x%02x, rev=0x%02x\n",
+ devid, olddevid, rev);
return;
}
- printf("Found Winbond %s (id=0x%02x, rev=0x%02x) at 0x%x\n",
- get_superio_name(reg_table, id), devid, rev, port);
+ if (olddevid == 0x0a || olddevid == 0x0c || olddevid == 0x0d)
+ printf("Found Winbond %s (id=0x%02x) at 0x%x\n",
+ get_superio_name(reg_table, id), olddevid, port);
+ else
+ printf("Found Winbond %s (id=0x%02x, rev=0x%02x) at 0x%x\n",
+ get_superio_name(reg_table, id), devid, rev, port);
+ chip_found = 1;
- /* TODO: Special notes in dump output for the MISC entries. */
dump_superio("Winbond", reg_table, port, id);
+}
+
+void probe_idregs_winbond(uint16_t port)
+{
+ enter_conf_mode_winbond_88(port);
+ probe_idregs_winbond_helper("(init=0x88) ", port);
+ exit_conf_mode_winbond_fintek_ite_8787(port);
- exit_conf_mode_winbond(port);
+ enter_conf_mode_winbond_89(port);
+ probe_idregs_winbond_helper("(init=0x89) ", port);
+ exit_conf_mode_winbond_fintek_ite_8787(port);
+
+ enter_conf_mode_winbond_86(port);
+ probe_idregs_winbond_helper("(init=0x86,0x86) ", port);
+ exit_conf_mode_winbond_fintek_ite_8787(port);
+
+ enter_conf_mode_winbond_fintek_ite_8787(port);
+ probe_idregs_winbond_helper("(init=0x87,0x87) ", port);
+ exit_conf_mode_winbond_fintek_ite_8787(port);
}
+void print_winbond_chips(void)
+{
+ print_vendor_chips("Winbond", reg_table);
+}
projects / coreboot.git / blobdiff