{0x00,0x03,0x10,0x0b,0x00,EOT}},
{EOT}}},
{0x8718, "IT8718F", {
+ {NOLDN, NULL,
+ {0x07,0x20,0x21,0x22,0x23,0x24,0x2b,EOT},
+ {NANA,0x87,0x18,0x01,0x00,0x00,0x00,EOT}},
+ {0x0, "Floppy",
+ {0x30,0x60,0x61,0x70,0x74,0xf0,0xf1,EOT},
+ {0x00,0x03,0xf0,0x06,0x02,0x00,0x00,EOT}},
+ {0x1, "COM1",
+ {0x30,0x60,0x61,0x70,0xf0,0xf1,0xf2,0xf3,EOT},
+ {0x00,0x03,0xf8,0x04,0x00,0x50,0x00,0x7f,EOT}},
+ {0x2, "COM2",
+ {0x30,0x60,0x61,0x70,0xf0,0xf1,0xf2,0xf3,EOT},
+ {0x00,0x02,0xf8,0x03,0x00,0x50,0x00,0x7f,EOT}},
+ {0x3, "Parallel port",
+ {0x30,0x60,0x61,0x62,0x63,0x70,0x74,0xf0,EOT},
+ {0x00,0x03,0x78,0x07,0x78,0x07,0x03,0x03,EOT}},
+ {0x4, "Environment controller",
+ {0x30,0x60,0x61,0x62,0x63,0x70,0xf0,0xf1,0xf2,0xf3,
+ 0xf4,0xf5,0xf6,EOT},
+ {0x00,0x02,0x90,0x02,0x30,0x09,0x00,0x00,0x00,0x00,
+ 0x00,NANA,NANA,EOT}},
+ {0x5, "Keyboard",
+ {0x30,0x60,0x61,0x62,0x63,0x70,0x71,0xf0,EOT},
+ {0x01,0x00,0x60,0x00,0x64,0x01,0x02,0x00,EOT}},
+ {0x6, "Mouse",
+ {0x30,0x70,0x71,0xf0,EOT},
+ {0x00,0x0c,0x02,0x00,EOT}},
+ {0x7, "GPIO",
+ {0x25,0x26,0x27,0x28,0x29,0x2a,0x2c,0x60,0x61,0x62,
+ 0x63,0x64,0x65,0x70,0x71,0x72,0x73,0x74,0xb0,0xb1,
+ 0xb2,0xb3,0xb4,0xb5,0xb8,0xb9,0xba,0xbb,0xbc,0xbd,
+ 0xc0,0xc1,0xc2,0xc3,0xc4,0xc8,0xc9,0xca,0xcb,0xcc,
+ 0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7,0xf0,0xf1,
+ 0xf2,0xf3,0xf4,0xf5,0xf6,0xf7,0xf8,0xf9,0xfa,0xfb,
+ 0xfc,0xfd,0xfe,0xff,EOT},
+ {0x01,0x00,0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x20,0x38,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x01,0x00,0x00,0x40,0x00,0x01,0x00,0x00,0x40,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ NANA,0x00,0x00,0x00,EOT}},
+ {0xa, "Consumer IR",
+ {0x30,0x60,0x61,0x70,0xf0,EOT},
+ {0x00,0x03,0x10,0x0b,0x00,EOT}},
{EOT}}},
{EOT}
};
-/* TODO: Drop this function later. */
-void dump_ite(uint16_t port, uint16_t id)
-{
- dump_superio("ITE", reg_table, port, id);
-}
-
/**
- * Enable configuration sequence (ITE uses this for newer IT87[012]xF).
- *
- * IT871[01]F uses 0x87, 0x87 -> Fintek detection should handle it
- * IT8708F uses 0x87, 0x87 -> Fintek detection should handle it
+ * IT871[01]F and IT8708F use 0x87, 0x87
* IT8761F uses 0x87, 0x61, 0x55, 0x55/0xaa
* IT86xxF series uses different ports
* IT8661F uses 0x86, 0x61, 0x55/0xaa, 0x55/0xaa and 32 more writes
get_superio_name(reg_table, id), id, chipver, port);
dump_superio("ITE", reg_table, port, id);
+ dump_superio_readable(port); /* TODO */
}
void probe_idregs_ite(uint16_t port)