/*
- * m29f400bt.c: driver for programming JEDEC standard flash parts
+ * This file is part of the flashrom project.
*
+ * Copyright (C) 2000 Silicon Integrated System Corporation
*
- * Copyright 2000 Silicon Integrated System Corporation
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- * Reference:
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
*
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "flash.h"
-#include "m29f400bt.h"
-#include "debug.h"
-
-void toggle_ready_m29f400bt(volatile uint8_t *dst)
-{
- unsigned int i = 0;
- uint8_t tmp1, tmp2;
-
- tmp1 = *dst & 0x40;
-
- while (i++ < 0xFFFFFF) {
- tmp2 = *dst & 0x40;
- if (tmp1 == tmp2) {
- break;
- }
- tmp1 = tmp2;
- }
-}
-
-void data_polling_m29f400bt(volatile uint8_t *dst, uint8_t data)
-{
- unsigned int i = 0;
- uint8_t tmp;
-
- data &= 0x80;
-
- while (i++ < 0xFFFFFF) {
- tmp = *dst & 0x80;
- if (tmp == data) {
- break;
- }
- }
-}
void protect_m29f400bt(volatile uint8_t *bios)
{
*dst = *src;
//*(volatile char *) (bios) = 0xF0;
//usleep(5);
- toggle_ready_m29f400bt(dst);
+ toggle_ready_jedec(dst);
printf
("Value in the flash at address %p = %#x, want %#x\n",
(uint8_t *) (dst - bios), *dst, *src);
myusec_delay(10);
id1 = *(volatile uint8_t *)bios;
+ /* The data sheet says id2 is at (bios + 0x01) and id2 listed in
+ * flash.h does not match. It should be possible to use JEDEC probe.
+ */
id2 = *(volatile uint8_t *)(bios + 0x02);
*(volatile uint8_t *)(bios + 0xAAA) = 0xAA;
*(volatile uint8_t *)(bios + 0xAAA) = 0x10;
myusec_delay(10);
- toggle_ready_m29f400bt(bios);
+ toggle_ready_jedec(bios);
- return (0);
+ return 0;
}
int block_erase_m29f400bt(volatile uint8_t *bios, volatile uint8_t *dst)
*dst = 0x30;
myusec_delay(10);
- toggle_ready_m29f400bt(bios);
+ toggle_ready_jedec(bios);
- return (0);
+ return 0;
}
int write_m29f400bt(struct flashchip *flash, uint8_t *buf)
volatile uint8_t *bios = flash->virtual_memory;
//erase_m29f400bt (flash);
- printf("Programming Page:\n ");
+ printf("Programming page:\n ");
/*********************************
*Pages for M29F400BT:
* 16 0x7c000 0x7ffff TOP
printf("\n");
//protect_m29f400bt (bios);
- return (0);
+ return 0;
}
-int write_linuxbios_m29f400bt(struct flashchip *flash, uint8_t *buf)
+int write_coreboot_m29f400bt(struct flashchip *flash, uint8_t *buf)
{
volatile uint8_t *bios = flash->virtual_memory;
- printf("Programming Page:\n ");
+ printf("Programming page:\n ");
/*********************************
*Pages for M29F400BT:
* 16 0x7c000 0x7ffff TOP
printf("\n");
//protect_m29f400bt (bios);
- return (0);
+ return 0;
}