ABUILD_DATE="December 10th, 2010"
ABUILD_VERSION="0.9.1"
+TOP=$PWD
+
# Where shall we place all the build trees?
TARGET=coreboot-builds
-XMLFILE=$( pwd )/abuild.xml
+XMLFILE=$TOP/abuild.xml
+REAL_XMLFILE=$XMLFILE
# path to payload. Should be more generic
PAYLOAD=/dev/null
# Configure-only mode
configureonly=0
+# Did any board fail to build?
+failed=0
+
# One might want to adjust these in case of cross compiling
for i in make gmake gnumake nonexistant_make; do
$i --version 2>/dev/null |grep "GNU Make" >/dev/null && break
} >> $XMLFILE
}
+function junit
+{
+ test "$mode" == "junit" && printf "$*\n" >> $XMLFILE
+ return 0
+}
+
+function junitfile
+{
+ test "$mode" == "junit" && {
+ printf '<![CDATA[\n'
+ cat $1
+ printf ']]>\n'
+ } >> $XMLFILE
+}
function vendors
if [ "$CONFIG" != "" ]; then
printf " Using existing configuration $CONFIG ... "
xml " <config>$CONFIG</config>"
- cp $CONFIG ${build_dir}/config.build
+ cp src/mainboard/$VENDOR/$MAINBOARD/$CONFIG ${build_dir}/config.build
else
printf " Creating config file... "
xml " <config>autogenerated</config>"
echo "CONFIG_CBFS_PREFIX=\"$cbfs_prefix\"" >> ${build_dir}/config.build
if [ "$PAYLOAD" != "/dev/null" ]; then
echo "# CONFIG_PAYLOAD_NONE is not set" >> ${build_dir}/config.build
+ echo "# CONFIG_PAYLOAD_SEABIOS is not set" >> ${build_dir}/config.build
echo "CONFIG_PAYLOAD_ELF=y" >> ${build_dir}/config.build
echo "CONFIG_PAYLOAD_FILE=\"$PAYLOAD\"" >> ${build_dir}/config.build
fi
fi
fi
- #yes "" | $MAKE oldconfig -j $cpus obj=${build_dir} objutil=$TARGET/sharedutils &> ${build_dir}/config.log
+ #yes "" | $MAKE oldconfig obj=${build_dir} objutil=$TARGET/sharedutils &> ${build_dir}/config.log
yes "" | $MAKE oldconfig DOTCONFIG=${build_dir}/config.build obj=${build_dir} objutil=$TARGET/sharedutils &> ${build_dir}/config.log
ret=$?
if [ $ret -eq 0 ]; then
CURR=$( pwd )
#stime=`perl -e 'print time();' 2>/dev/null || date +%s`
build_dir=$TARGET/${VENDOR}_${MAINBOARD}
- eval $MAKE $silent -j $cpus DOTCONFIG=${build_dir}/config.build obj=${build_dir} objutil=$TARGET/sharedutils \
+ eval $MAKE $silent DOTCONFIG=${build_dir}/config.build obj=${build_dir} objutil=$TARGET/sharedutils \
&> ${build_dir}/make.log
ret=$?
- mv .xcompile ${build_dir}/xcompile.build
+ cp .xcompile ${build_dir}/xcompile.build
cd $TARGET/${VENDOR}_${MAINBOARD}
etime=`perl -e 'print time();' 2>/dev/null || date +%s`
duration=$(( $etime - $stime ))
xml " <buildtime>${duration}s</buildtime>"
+ junit " <testcase classname='board' name='$TARCH/$VENDOR/$MAINBOARD' time='$duration' >"
xml " <log>"
xmlfile make.log
if [ $ret -eq 0 ]; then
xml " <compile>ok</compile>"
+ junit "<system-out>"
+ junitfile make.log
+ junit "</system-out>"
printf "ok\n" > compile.status
printf "ok. (took ${duration}s)\n"
cd $CURR
return 0
else
xml " <compile>failed</compile>"
+ junit "<failure type='BuildFailed'>"
+ junitfile make.log
+ junit "</failure>"
printf "FAILED after ${duration}s!\nLog excerpt:\n"
tail -n $CONTEXT make.log 2> /dev/null || tail -$CONTEXT make.log
cd $CURR
+ failed=1
return 1
fi
}
-function build_broken
-{
- CURR=`pwd`
- status="yes"
- [ -r "$ROOT/src/mainboard/${VENDOR}/${MAINBOARD}/BROKEN" ] && status="no"
- [ "$buildbroken" == "true" -o "$status" == "yes" ]
-}
-
function build_target
{
VENDOR=$1
HOSTCC='gcc'
printf "Building $VENDOR/$MAINBOARD; "
+ XMLFILE=$TOP/$TARGET/${VENDOR}_${MAINBOARD}/abuild.xml
xml "<mainboard>"
xml ""
xml ""
xml "</mainboard>"
+ junit " <testcase classname='board' name='$TARCH/$VENDOR/$MAINBOARD' >"
+ junit "<failure type='NoCrossCompiler'>No cross-compiler for $TARCH found</failure>"
+
return 0
else
printf "$TARCH: ok, $ARCH using ${CROSS_COMPILE}gcc\n"
CC="$CC -fno-stack-protector"
fi
- build_broken $VENDOR $MAINBOARD || \
- {
- printf " ( broken mainboard/$VENDOR/$MAINBOARD skipped )\n\n"
- xml " <status>knownbroken</status>"
- xml ""
- xml "</mainboard>"
- return 0
- }
-
stime=`perl -e 'print time();' 2>/dev/null || date +%s`
create_buildenv $VENDOR $MAINBOARD $CONFIG
if [ $? -eq 0 -a $configureonly -eq 0 ]; then
xml ""
xml "</mainboard>"
+ junit "</testcase>"
printf "\n"
}
printf "Options:\n"
printf " [-v|--verbose] print more messages\n"
printf " [-a|--all] build previously succeeded ports as well\n"
- printf " [-b|--broken] attempt to build ports that are known broken\n"
printf " [-r|--remove] remove output dir after build\n"
printf " [-t|--target <vendor/board>] attempt to build target vendor/board only\n"
printf " [-p|--payloads <dir>] use payloads in <dir> to build images\n"
printf " [-h|--help] print this help and exit\n"
printf " [-x|--xml] write xml log file \n"
printf " (defaults to $XMLFILE)\n"
+ printf " [-J|--junit] write JUnit formatted xml log file \n"
+ printf " (defaults to $XMLFILE)\n"
printf " [-T|--test] submit image(s) to automated test system\n"
printf " [-c|--cpus <numcpus>] build on <numcpus> at the same time\n"
printf " [-s|--silent] omit compiler calls in logs\n"
getoptbrand="`getopt -V`"
if [ "${getoptbrand:0:6}" == "getopt" ]; then
# Detected GNU getopt that supports long options.
- args=`getopt -l version,verbose,help,all,target:,broken,payloads:,test,cpus:,silent,xml,config,loglevel:,remove,prefix:,update,nostackprotect,scan-build,ccache -o Vvhat:bp:Tc:sxCl:rP:uy -- "$@"`
+ args=`getopt -l version,verbose,help,all,target:,payloads:,test,cpus:,silent,junit,xml,config,loglevel:,remove,prefix:,update,nostackprotect,scan-build,ccache -o Vvhat:p:Tc:sJxCl:rP:uy -- "$@"`
eval set -- $args
else
# Detected non-GNU getopt
- args=`getopt Vvhat:bp:Tc:sxCl:rP:uy $*`
+ args=`getopt Vvhat:bp:Tc:sJxCl:rP:uy $*`
set -- $args
fi
while true ; do
case "$1" in
-x|--xml) shift; mode=xml; rm -f $XMLFILE ;;
+ -J|--junit) shift; mode=junit; rm -f $XMLFILE ;;
-t|--target) shift; target="$1"; shift;;
-a|--all) shift; buildall=true;;
- -b|--broken) shift; buildbroken=true;;
-r|--remove) shift; remove=true;;
-v|--verbose) shift; verbose=true; silent='V=1';;
-V|--version) shift; myversion; exit 0;;
esac
done
+if [ "$cpus" != "1" ]; then
+ export MAKEFLAGS="-j $cpus"
+fi
+
# /path/to/freebios2/
test -z "$1" || ROOT=$1
xml '<?xml version="1.0" encoding="utf-8"?>'
xml '<abuild>'
+junit '<?xml version="1.0" encoding="utf-8"?>'
+junit '<testsuite>'
+
if [ "$target" != "" ]; then
# build a single board
VENDOR=`printf $target|cut -f1 -d/`
if [ ! -r $ROOT/src/mainboard/$target ]; then
printf "No such target: $target\n"
xml '</abuild>'
+ junit '</testsuite>'
exit 1
fi
build_target $VENDOR $MAINBOARD $CONFIG
test_target $VENDOR $MAINBOARD
+ test "$mode" != "text" && cat $TARGET/${VENDOR}_${MAINBOARD}/abuild.xml >> $REAL_XMLFILE
+ XMLFILE=$REAL_XMLFILE
else
# build all boards per default
for VENDOR in $( vendors ); do
remove_target $VENDOR $MAINBOARD
done
done
+ if [ "$mode" != "text" ]; then
+ for xmlfile in $TARGET/*_*/abuild.xml; do
+ cat $xmlfile >> $REAL_XMLFILE
+ done
+ fi
+ XMLFILE=$REAL_XMLFILE
fi
xml '</abuild>'
+junit '</testsuite>'
+exit $failed
projects / coreboot.git / blobdiff