#include "host.h"
#include "../usbspec/usb11spec.h"
+/* activate control_quirk (from MIKE) */
+//#define _USE_C_Q
+
+/* macro for accessing u32 variables that need to be in little endian byte order;
+ *
+ * whenever you read or write from an u32 field that the ohci host controller
+ * will read or write from too, use this macro for access!
+ */
+#define LE(dword) (u32)( (((dword) & 0xFF000000) >> 24) | \
+ (((dword) & 0x00FF0000) >> 8) | \
+ (((dword) & 0x0000FF00) << 8) | \
+ (((dword) & 0x000000FF) << 24) )
+
+static struct general_td *allocate_general_td();
+static void dbg_op_state();
+static void configure_ports(u8 from_init);
+static void setup_port(u32 reg, u8 from_init);
+
static struct ohci_hcca hcca_oh0;
+
+#ifdef _USE_C_Q
static struct endpoint_descriptor *allocate_endpoint()
{
struct endpoint_descriptor *ep;
- ep = (struct endpoint_descriptor *)calloc(sizeof(struct endpoint_descriptor), 16);
- ep->flags = OHCI_ENDPOINT_GENERAL_FORMAT;
- ep->headp = ep->tailp = ep->nexted = 0;
+ ep = (struct endpoint_descriptor *)memalign(16, sizeof(struct endpoint_descriptor));
+ memset(ep, 0, sizeof(struct endpoint_descriptor));
+ ep->flags = LE(OHCI_ENDPOINT_GENERAL_FORMAT);
+ ep->headp = ep->tailp = ep->nexted = LE(0);
return ep;
}
+#endif
-static struct general_td *allocate_general_td(size_t bsize)
+static struct general_td *allocate_general_td()
{
struct general_td *td;
- td = (struct general_td *)calloc(sizeof(struct general_td), 16);
- td->flags = 0;
- td->nexttd = virt_to_phys(td);
- if(bsize == 0) {
- td->cbp = td->be = 0;
- } else {
- td->cbp = virt_to_phys(malloc(bsize));
- td->be = td->cbp + bsize - 1;
- }
+ td = (struct general_td *)memalign(16, sizeof(struct general_td));
+ memset(td, 0, sizeof(struct general_td));
+ td->flags = LE(0);
+ td->nexttd = LE(0);
+ td->cbp = td->be = LE(0);
return td;
}
+#ifdef _USE_C_Q
static void control_quirk()
{
- static struct endpoint_descriptor *ed; /* empty ED */
- static struct general_td *td; /* dummy TD */
+ static struct endpoint_descriptor *ed = 0; /* empty ED */
+ static struct general_td *td = 0; /* dummy TD */
u32 head;
u32 current;
u32 status;
return;
}
-#define ED_MASK ((u32)~0x0f)
- ed->tailp = ed->headp = virt_to_phys((void*) ((u32)td & ED_MASK));
- ed->flags |= OHCI_ENDPOINT_DIRECTION_OUT;
+ ed->tailp = ed->headp = LE(virt_to_phys((void*) ((u32)td & OHCI_ENDPOINT_HEAD_MASK)));
+ ed->flags |= LE(OHCI_ENDPOINT_DIRECTION_OUT);
}
/*
* Load the special empty ED and tell the controller to
* process the control list.
*/
- sync_after_write(ed, 64);
- sync_after_write(td, 64);
+ sync_after_write(ed, 16);
+ sync_after_write(td, 16);
write32(OHCI0_HC_CTRL_HEAD_ED, virt_to_phys(ed));
status = read32(OHCI0_HC_CONTROL);
printf("nohead!\n");
}
}
+#endif
static void dbg_op_state()
}
}
+static void dbg_td_flag(u32 flag)
+{
+ printf("**************** dbg_td_flag: 0x%08X ***************\n", flag);
+ printf("CC: %X\tshould be 0, see page 32 (ohci spec)\n", (flag>>28)&0xf);
+ printf("EC: %X\tsee page 20 (ohci spec)\n", (flag>>26)&3);
+ printf(" T: %X\n", (flag>>24)&3);
+ printf("DI: %X\n", (flag>>21)&7);
+ printf("DP: %X\n", (flag>>19)&3);
+ printf(" R: %X\n", (flag>>18)&1);
+ printf("********************************************************\n");
+}
-/**
- * Enqueue a transfer descriptor.
- */
-u8 hcdi_enqueue(usb_transfer_descriptor *td) {
- control_quirk();
-
- printf( "===========================\n"
- "===========================\n"
- "done head (vor sync): 0x%08X\n", hcca_oh0.done_head);
- sync_before_read(&hcca_oh0, 256);
- printf("done head (nach sync): 0x%08X\n", hcca_oh0.done_head);
+static void general_td_fill(struct general_td *dest, const usb_transfer_descriptor *src)
+{
+ if(src->actlen) {
+ dest->cbp = LE(virt_to_phys(src->buffer));
+ dest->be = LE(LE(dest->cbp) + src->actlen - 1);
+ /* save virtual address here */
+ dest->bufaddr = (u32) src->buffer;
+ }
+ else {
+ dest->cbp = dest->be = LE(0);
+ dest->bufaddr = 0;
+ }
- struct general_td *tmptd = allocate_general_td(sizeof(td->actlen));
- (void) memcpy((void*) phys_to_virt(tmptd->cbp), td->buffer, sizeof(td->actlen)); /* throws dsi exception after some time :X */
+ dest->buflen = src->actlen;
- tmptd->flags &= ~OHCI_TD_DIRECTION_PID_MASK;
- switch(td->pid) {
+ dest->flags &= LE(~OHCI_TD_DIRECTION_PID_MASK);
+ switch(src->pid) {
case USB_PID_SETUP:
printf("pid_setup\n");
- tmptd->flags |= OHCI_TD_DIRECTION_PID_SETUP;
+ dest->flags |= LE(OHCI_TD_DIRECTION_PID_SETUP);
+ dest->flags |= LE(OHCI_TD_TOGGLE_0);
+ dest->flags |= LE(OHCI_TD_BUFFER_ROUNDING);
break;
case USB_PID_OUT:
printf("pid_out\n");
- tmptd->flags |= OHCI_TD_DIRECTION_PID_OUT;
+ dest->flags |= LE(OHCI_TD_DIRECTION_PID_OUT);
+ dest->flags |= LE(OHCI_TD_BUFFER_ROUNDING);
+
+ /*
+ * TODO: just temporary solution! (consider it with len?)
+ * there can be also regular PID_OUT pakets
+ */
+ dest->flags |= LE(OHCI_TD_TOGGLE_1);
break;
case USB_PID_IN:
printf("pid_in\n");
- tmptd->flags |= OHCI_TD_DIRECTION_PID_IN;
+ dest->flags |= LE(OHCI_TD_DIRECTION_PID_IN);
+ if(src->maxp > src->actlen) {
+ dest->flags |= LE(OHCI_TD_BUFFER_ROUNDING);
+ printf("round buffer!\n");
+ }
+ /*
+ * let the endpoint do the togglestuff!
+ * TODO: just temporary solution!
+ * there can be also inregular PID_IN pakets (@Status Stage)
+ */
+ dest->flags |= LE(OHCI_TD_TOGGLE_CARRY);
break;
}
+ dest->flags |= LE(OHCI_TD_SET_DELAY_INTERRUPT(7));
+}
- printf("tmptd hexump (before):\n");
- hexdump(tmptd, sizeof(struct general_td));
- printf("tmptd-cbp hexump (before):\n");
- hexdump((void*) phys_to_virt(tmptd->cbp), sizeof(td->actlen));
+#ifdef _DU_OHCI_F
+static void dump_address(void *addr, u32 size, const char* str)
+{
+ printf("%s hexdump (%d) @ 0x%08X:\n", str, size, addr);
+ hexdump(addr, size);
+}
+#endif
- sync_after_write((void*) (tmptd->cbp), sizeof(td->actlen));
- sync_after_write(tmptd, sizeof(struct general_td));
+static struct endpoint_descriptor _edhead;
+struct endpoint_descriptor *edhead = 0;
+void hcdi_fire()
+{
+#ifdef _DU_OHCI_F
+ printf("<^> <^> <^> hcdi_fire(start)\n");
+#endif
- struct endpoint_descriptor *dummyconfig = allocate_endpoint();
+ if(edhead == 0)
+ return;
- printf("tmpdt & ED_MASK: 0x%08X\n", virt_to_phys((void*) ((u32)tmptd & ED_MASK)));
-#define ED_MASK ((u32)~0x0f)
- dummyconfig->tailp = /* dummyconfig->headp = */ virt_to_phys((void*) ((u32)tmptd & ED_MASK));
-// dummyconfig->flags |= OHCI_ENDPOINT_DIRECTION_OUT;
- sync_after_write(dummyconfig, 64);
- write32(OHCI0_HC_CTRL_HEAD_ED, virt_to_phys(dummyconfig));
+#ifdef _USE_C_Q
+ required? YES! :O ... erm... or no? :/ ... in fact I have no idea
+ control_quirk();
+#endif
+
+ write32(OHCI0_HC_CTRL_HEAD_ED, virt_to_phys(edhead));
+
+ /* sync it all */
+ sync_after_write(edhead, sizeof(struct endpoint_descriptor));
+#ifdef _DU_OHCI_F
+ dump_address(edhead, sizeof(struct endpoint_descriptor), "edhead(before)");
+#endif
+
+ struct general_td *x = phys_to_virt(LE(edhead->headp) & OHCI_ENDPOINT_HEAD_MASK);
+ while(virt_to_phys(x)) {
+ sync_after_write(x, sizeof(struct general_td));
+#ifdef _DU_OHCI_F
+ dump_address(x, sizeof(struct general_td), "x(before)");
+#endif
+
+ if(x->buflen > 0) {
+ sync_after_write((void*) phys_to_virt(LE(x->cbp)), x->buflen);
+#ifdef _DU_OHCI_F
+ dump_address((void*) phys_to_virt(LE(x->cbp)), x->buflen, "x->cbp(before)");
+#endif
+ }
+ x = phys_to_virt(LE(x->nexttd));
+ }
- printf("OHCI_CTRL_CLE: 0x%08X\n", read32(OHCI0_HC_CONTROL)&OHCI_CTRL_CLE);
- printf("OHCI_CLF: 0x%08X\n", read32(OHCI0_HC_COMMAND_STATUS)&OHCI_CLF);
+ /* trigger control list */
set32(OHCI0_HC_CONTROL, OHCI_CTRL_CLE);
write32(OHCI0_HC_COMMAND_STATUS, OHCI_CLF);
- printf("+++++++++++++++++++++++++++++\n");
- /* spin until the controller is done with the control list */
- u32 current = read32(OHCI0_HC_CTRL_CURRENT_ED);
- printf("current: 0x%08X\n", current);
- while(!current) {
- udelay(10);
- current = read32(OHCI0_HC_CTRL_CURRENT_ED);
+ struct general_td *n=0, *prev = 0, *next = 0;
+ /* poll until edhead->headp is null */
+ do {
+ sync_before_read(edhead, sizeof(struct endpoint_descriptor));
+#ifdef _DU_OHCI_F
+ printf("edhead->headp: 0x%08X\n", LE(edhead->headp));
+ udelay(10000);
+#endif
+
+ /* if halted, debug output plz. will break the transfer */
+ if((LE(edhead->headp) & OHCI_ENDPOINT_HALTED)) {
+ n = phys_to_virt(LE(edhead->headp)&~0xf);
+ prev = phys_to_virt((u32)prev);
+#ifdef _DU_OHCI_F
+ printf("halted!\n");
+#endif
+
+ sync_before_read((void*) n, sizeof(struct general_td));
+#ifdef _DU_OHCI_F
+ printf("n: 0x%08X\n", n);
+ dump_address(n, sizeof(struct general_td), "n(after)");
+#endif
+ if(n->buflen > 0) {
+ sync_before_read((void*) n->bufaddr, n->buflen);
+#ifdef _DU_OHCI_F
+ dump_address((void*) n->bufaddr, n->buflen, "n->bufaddr(after)");
+#endif
+ }
+ dbg_td_flag(LE(n->flags));
+
+ sync_before_read((void*) prev, sizeof(struct general_td));
+#ifdef _DU_OHCI_F
+ printf("prev: 0x%08X\n", prev);
+ dump_address(prev, sizeof(struct general_td), "prev(after)");
+#endif
+ if(prev->buflen >0) {
+ sync_before_read((void*) prev->bufaddr, prev->buflen);
+#ifdef _DU_OHCI_F
+ dump_address((void*) prev->bufaddr, prev->buflen, "prev->bufaddr(after)");
+#endif
+ }
+#ifdef _DU_OHCI_F
+ dbg_td_flag(LE(prev->flags));
+ printf("halted end!\n");
+#endif
+ return;
+ }
+ prev = (struct general_td*) (LE(edhead->headp)&~0xf);
+ } while(LE(edhead->headp)&~0xf);
+
+ n = phys_to_virt(read32(OHCI0_HC_DONE_HEAD) & ~1);
+#ifdef _DU_OHCI_F
+ printf("hc_done_head: 0x%08X\n", read32(OHCI0_HC_DONE_HEAD));
+#endif
+
+ prev = 0; next = 0;
+ /* reverse done queue */
+ while(virt_to_phys(n) && edhead->tdcount) {
+ sync_before_read((void*) n, sizeof(struct general_td));
+#ifdef _DU_OHCI_F
+ printf("n: 0x%08X\n", n);
+ printf("next: 0x%08X\n", next);
+ printf("prev: 0x%08X\n", prev);
+#endif
+
+ next = n;
+ n = (struct general_td*) phys_to_virt(LE(n->nexttd));
+ next->nexttd = (u32) prev;
+ prev = next;
+
+ edhead->tdcount--;
}
- udelay(2000);
- udelay(2000);
- udelay(2000);
- current = read32(OHCI0_HC_CTRL_CURRENT_ED);
- printf("current: 0x%08X\n", current);
- printf("+++++++++++++++++++++++++++++\n");
- udelay(2000);
- udelay(2000);
- udelay(2000);
- udelay(2000);
- udelay(2000);
- udelay(2000);
- udelay(2000);
- udelay(2000);
-
- sync_before_read(tmptd, sizeof(struct general_td));
- printf("tmptd hexump (after):\n");
- hexdump(tmptd, sizeof(struct general_td));
-
- sync_before_read((void*) (tmptd->cbp), sizeof(td->actlen));
- printf("tmptd-cbp hexump (after):\n");
- hexdump((void*) (tmptd->cbp), sizeof(td->actlen));
-
- printf("done head (vor sync): 0x%08X\n", hcca_oh0.done_head);
- sync_before_read(&hcca_oh0, 256);
- printf("done head (nach sync): 0x%08X\n", hcca_oh0.done_head);
+ n = next;
+ prev = 0;
+ while(virt_to_phys(n)) {
+#ifdef _DU_OHCI_F
+ dump_address(n, sizeof(struct general_td), "n(after)");
+#endif
+ if(n->buflen > 0) {
+ sync_before_read((void*) n->bufaddr, n->buflen);
+#ifdef _DU_OHCI_F
+ dump_address((void*) n->bufaddr, n->buflen, "n->bufaddr(after)");
+#endif
+ }
+#ifdef _DU_OHCI_F
+ dbg_td_flag(LE(n->flags));
+#endif
+ prev = n;
+ n = (struct general_td*) n->nexttd;
+ free(prev);
+ }
+
+ hcca_oh0.done_head = 0;
+ sync_after_write(&hcca_oh0, sizeof(hcca_oh0));
+
+ write32(OHCI0_HC_CONTROL, read32(OHCI0_HC_CONTROL)&~OHCI_CTRL_CLE);
+
+ edhead = 0;
- free(tmptd);
+#ifdef _DU_OHCI_F
+ printf("<^> <^> <^> hcdi_fire(end)\n");
+#endif
+}
+
+/**
+ * Enqueue a transfer descriptor.
+ */
+u8 hcdi_enqueue(const usb_transfer_descriptor *td) {
+#ifdef _DU_OHCI_Q
+ printf("*()*()*()*()*()*()*() hcdi_enqueue(start)\n");
+#endif
+ if(!edhead) {
+ edhead = &_edhead;
+ memset(edhead, 0, sizeof(struct endpoint_descriptor));
+ edhead->flags = LE(OHCI_ENDPOINT_GENERAL_FORMAT);
+ edhead->headp = edhead->tailp = edhead->nexted = LE(0);
+ edhead->flags |= LE(OHCI_ENDPOINT_LOW_SPEED |
+ OHCI_ENDPOINT_SET_DEVICE_ADDRESS(td->devaddress) |
+ OHCI_ENDPOINT_SET_ENDPOINT_NUMBER(td->endpoint) |
+ OHCI_ENDPOINT_SET_MAX_PACKET_SIZE(td->maxp));
+ edhead->tdcount = 0;
+ }
+
+ struct general_td *tdhw = allocate_general_td();
+ general_td_fill(tdhw, td);
+ edhead->tdcount ++;
+
+ if(!edhead->headp) {
+ /* first transfer */
+ edhead->headp = LE(virt_to_phys((void*) ((u32)tdhw & OHCI_ENDPOINT_HEAD_MASK)));
+ }
+ else {
+ /* headp in endpoint already exists
+ * => go to list end
+ */
+ struct general_td *n = (struct general_td*) phys_to_virt(LE(edhead->headp) & OHCI_ENDPOINT_HEAD_MASK);
+ while(LE(n->nexttd)) {
+ n = phys_to_virt(LE(n->nexttd));
+ }
+ n->nexttd = LE(virt_to_phys((void*) ((u32)tdhw & OHCI_ENDPOINT_HEAD_MASK)));
+#ifdef _DU_OHCI_Q
+ printf("n: 0x%08X\n", n);
+ printf("n->nexttd: 0x%08X\n", phys_to_virt(LE(n->nexttd)));
+#endif
+ }
+
+#ifdef _DU_OHCI_Q
+ printf("*()*()*()*()*()*()*() hcdi_enqueue(end)\n");
+#endif
return 0;
}
+
/**
* Remove an transfer descriptor from transfer queue.
*/
write32(OHCI0_HC_CONTROL, OHCI_CONTROL_INIT | OHCI_USB_OPER);
/* wake on ConnectStatusChange, matching external hubs */
- set32(OHCI0_HC_RH_STATUS, RH_HS_DRWE);
+ write32(OHCI0_HC_RH_STATUS, /*RH_HS_DRWE |*/ RH_HS_LPSC);
/* Choose the interrupts we care about now, others later on demand */
write32(OHCI0_HC_INT_STATUS, ~0);
write32(OHCI0_HC_INT_ENABLE, OHCI_INTR_INIT);
+ //wtf?
+ wait_ms ((read32(OHCI0_HC_RH_DESCRIPTOR_A) >> 23) & 0x1fe);
+
+ configure_ports((u8)1);
irq_restore(cookie);
dbg_op_state();
}
+static void configure_ports(u8 from_init)
+{
+#ifdef _DU_OHCI_RH
+ printf("OHCI0_HC_RH_DESCRIPTOR_A:\t0x%08X\n", read32(OHCI0_HC_RH_DESCRIPTOR_A));
+ printf("OHCI0_HC_RH_DESCRIPTOR_B:\t0x%08X\n", read32(OHCI0_HC_RH_DESCRIPTOR_B));
+ printf("OHCI0_HC_RH_STATUS:\t\t0x%08X\n", read32(OHCI0_HC_RH_STATUS));
+ printf("OHCI0_HC_RH_PORT_STATUS_1:\t0x%08X\n", read32(OHCI0_HC_RH_PORT_STATUS_1));
+ printf("OHCI0_HC_RH_PORT_STATUS_2:\t0x%08X\n", read32(OHCI0_HC_RH_PORT_STATUS_2));
+#endif
+
+ setup_port(OHCI0_HC_RH_PORT_STATUS_1, from_init);
+ setup_port(OHCI0_HC_RH_PORT_STATUS_2, from_init);
+#ifdef _DU_OHCI_RH
+ printf("configure_ports done\n");
+#endif
+}
+
+static void setup_port(u32 reg, u8 from_init)
+{
+ u32 port = read32(reg);
+ if((port & RH_PS_CCS) && ((port & RH_PS_CSC) || from_init)) {
+ write32(reg, RH_PS_CSC);
+
+ wait_ms(120);
+
+ /* clear CSC flag, set PES and start port reset (PRS) */
+ write32(reg, RH_PS_PES);
+ while(!(read32(reg) & RH_PS_PES)) {
+#ifdef _DU_OHCI_RH
+ printf("fu\n");
+#endif
+ return;
+ }
+
+ write32(reg, RH_PS_PRS);
+
+ /* spin until port reset is complete */
+ while(!(read32(reg) & RH_PS_PRSC)); // hint: it may stuck here
+#ifdef _DU_OHCI_RH
+ printf("loop done\n");
+#endif
+
+ (void) usb_add_device();
+ }
+}
+
void hcdi_irq()
{
/* read interrupt status */
flags &= read32(OHCI0_HC_INT_ENABLE);
/* nothing to do? */
- if (flags == 0)
+ if (flags == 0) {
+ printf("OHCI Interrupt occured: but not for you! WTF?!\n");
return;
+ }
printf("OHCI Interrupt occured: ");
/* UnrecoverableError */
if (flags & OHCI_INTR_RHSC) {
printf("RootHubStatusChange\n");
/* TODO: set some next_statechange variable... */
+ configure_ports(0);
write32(OHCI0_HC_INT_STATUS, OHCI_INTR_RD | OHCI_INTR_RHSC);
}
/* ResumeDetected */
/* WritebackDoneHead */
if (flags & OHCI_INTR_WDH) {
printf("WritebackDoneHead\n");
- /* TODO: figure out what the linux kernel does here... */
+ /* basically the linux irq handler reverse TDs to their urbs
+ * and set done_head to null.
+ * since we are polling atm, just should do the latter task.
+ * however, this won't work for now (i don't know why...)
+ * TODO!
+ */
+#if 0
+ sync_before_read(&hcca_oh0, 256);
+ hcca_oh0.done_head = 0;
+ sync_after_write(&hcca_oh0, 256);
+#endif
}
/* TODO: handle any pending URB/ED unlinks... */
}
}
+void show_frame_no()
+{
+ sync_before_read(&hcca_oh0, 256);
+ printf("***** frame_no: %d *****\n", LE(hcca_oh0.frame_no));
+}