#include "config.h" // CONFIG_*
#include "usb.h" // usb_ctrlrequest
#include "biosvar.h" // GET_GLOBAL
+#include "ps2port.h" // ATKBD_CMD_GETID
struct usb_pipe *keyboard_pipe VAR16VISIBLE;
+struct usb_pipe *mouse_pipe VAR16VISIBLE;
/****************************************************************
* Setup
****************************************************************/
+// Send USB HID protocol message.
static int
set_protocol(struct usb_pipe *pipe, u16 val)
{
return send_default_control(pipe, &req, NULL);
}
+// Send USB HID SetIdle request.
static int
set_idle(struct usb_pipe *pipe, int ms)
{
#define KEYREPEATWAITMS 500
#define KEYREPEATMS 33
-int
-usb_keyboard_init(struct usb_pipe *pipe
- , struct usb_interface_descriptor *iface, int imax)
+static int
+usb_kbd_init(struct usb_pipe *pipe, struct usb_endpoint_descriptor *epdesc)
{
if (! CONFIG_USB_KEYBOARD)
return -1;
if (keyboard_pipe)
// XXX - this enables the first found keyboard (could be random)
return -1;
- dprintf(2, "usb_keyboard_setup %p\n", pipe);
- // Find intr in endpoint.
- struct usb_endpoint_descriptor *epdesc = findEndPointDesc(
- iface, imax, USB_ENDPOINT_XFER_INT, USB_DIR_IN);
- if (!epdesc || epdesc->wMaxPacketSize != 8) {
- dprintf(1, "No keyboard intr in?\n");
+ if (epdesc->wMaxPacketSize != 8)
return -1;
- }
// Enable "boot" protocol.
- int ret = set_protocol(pipe, 1);
+ int ret = set_protocol(pipe, 0);
if (ret)
return -1;
// Periodically send reports to enable key repeat.
return 0;
}
-void
-usb_keyboard_setup(void)
+static int
+usb_mouse_init(struct usb_pipe *pipe, struct usb_endpoint_descriptor *epdesc)
{
- if (! CONFIG_USB_KEYBOARD)
- return;
- keyboard_pipe = NULL;
+ if (! CONFIG_USB_MOUSE)
+ return -1;
+ if (mouse_pipe)
+ // XXX - this enables the first found mouse (could be random)
+ return -1;
+
+ if (epdesc->wMaxPacketSize < 3 || epdesc->wMaxPacketSize > 8)
+ return -1;
+
+ // Enable "boot" protocol.
+ int ret = set_protocol(pipe, 0);
+ if (ret)
+ return -1;
+
+ mouse_pipe = alloc_intr_pipe(pipe, epdesc);
+ if (!mouse_pipe)
+ return -1;
+
+ dprintf(1, "USB mouse initialized\n");
+ return 0;
+}
+
+// Initialize a found USB HID device (if applicable).
+int
+usb_hid_init(struct usb_pipe *pipe
+ , struct usb_interface_descriptor *iface, int imax)
+{
+ if (! CONFIG_USB_KEYBOARD || ! CONFIG_USB_MOUSE)
+ return -1;
+ dprintf(2, "usb_hid_init %p\n", pipe);
+
+ if (iface->bInterfaceSubClass != USB_INTERFACE_SUBCLASS_BOOT)
+ // Doesn't support boot protocol.
+ return -1;
+
+ // Find intr in endpoint.
+ struct usb_endpoint_descriptor *epdesc = findEndPointDesc(
+ iface, imax, USB_ENDPOINT_XFER_INT, USB_DIR_IN);
+ if (!epdesc) {
+ dprintf(1, "No usb hid intr in?\n");
+ return -1;
+ }
+
+ if (iface->bInterfaceProtocol == USB_INTERFACE_PROTOCOL_KEYBOARD)
+ return usb_kbd_init(pipe, epdesc);
+ if (iface->bInterfaceProtocol == USB_INTERFACE_PROTOCOL_MOUSE)
+ return usb_mouse_init(pipe, epdesc);
+ return -1;
}
* Keyboard events
****************************************************************/
+// Mapping from USB key id to ps2 key sequence.
static u16 KeyToScanCode[] VAR16 = {
0x0000, 0x0000, 0x0000, 0x0000, 0x001e, 0x0030, 0x002e, 0x0020,
0x0012, 0x0021, 0x0022, 0x0023, 0x0017, 0x0024, 0x0025, 0x0026,
0x0048, 0x0049, 0x0052, 0x0053
};
+// Mapping from USB modifier id to ps2 key sequence.
static u16 ModifierToScanCode[] VAR16 = {
//lcntl, lshift, lalt, lgui, rcntl, rshift, ralt, rgui
0x001d, 0x002a, 0x0038, 0xe05b, 0xe01d, 0x0036, 0xe038, 0xe05c
#define RELEASEBIT 0x80
+// Format of USB keyboard event data
struct keyevent {
u8 modifiers;
u8 reserved;
u8 keys[6];
};
+// Translate data from KeyToScanCode[] to calls to process_key().
static void
prockeys(u16 keys)
{
process_key(keys);
}
+// Handle a USB key press/release event.
static void
procscankey(u8 key, u8 flags)
{
prockeys(keys | flags);
}
+// Handle a USB modifier press/release event.
static void
procmodkey(u8 mods, u8 flags)
{
}
}
+// Process USB keyboard data.
static void noinline
handle_key(struct keyevent *data)
{
SET_EBDA2(ebda_seg, usbkey_last.data, old.data);
}
-void
+// Check if a USB keyboard event is pending and process it if so.
+static void
usb_check_key(void)
{
if (! CONFIG_USB_KEYBOARD)
handle_key(&data);
}
}
+
+// Test if USB keyboard is active.
+inline int
+usb_kbd_active(void)
+{
+ if (! CONFIG_USB_KEYBOARD)
+ return 0;
+ return GET_GLOBAL(keyboard_pipe) != NULL;
+}
+
+// Handle a ps2 style keyboard command.
+inline int
+usb_kbd_command(int command, u8 *param)
+{
+ if (! CONFIG_USB_KEYBOARD)
+ return -1;
+ dprintf(9, "usb keyboard cmd=%x\n", command);
+ switch (command) {
+ case ATKBD_CMD_GETID:
+ // Return the id of a standard AT keyboard.
+ param[0] = 0xab;
+ param[1] = 0x83;
+ return 0;
+ default:
+ return -1;
+ }
+}
+
+
+/****************************************************************
+ * Mouse events
+ ****************************************************************/
+
+// Format of USB mouse event data
+struct mouseevent {
+ u8 buttons;
+ u8 x, y;
+ u8 reserved[5];
+};
+
+// Process USB mouse data.
+static void
+handle_mouse(struct mouseevent *data)
+{
+ dprintf(9, "Got mouse b=%x x=%x y=%x\n", data->buttons, data->x, data->y);
+
+ s8 x = data->x, y = -data->y;
+ u8 flag = ((data->buttons & 0x7) | (1<<3)
+ | (x & 0x80 ? (1<<4) : 0) | (y & 0x80 ? (1<<5) : 0));
+ process_mouse(flag);
+ process_mouse(x);
+ process_mouse(y);
+}
+
+// Check if a USB mouse event is pending and process it if so.
+static void
+usb_check_mouse(void)
+{
+ if (! CONFIG_USB_MOUSE)
+ return;
+ struct usb_pipe *pipe = GET_GLOBAL(mouse_pipe);
+ if (!pipe)
+ return;
+
+ for (;;) {
+ struct mouseevent data;
+ int ret = usb_poll_intr(pipe, &data);
+ if (ret)
+ break;
+ handle_mouse(&data);
+ }
+}
+
+// Test if USB mouse is active.
+inline int
+usb_mouse_active(void)
+{
+ if (! CONFIG_USB_MOUSE)
+ return 0;
+ return GET_GLOBAL(mouse_pipe) != NULL;
+}
+
+// Handle a ps2 style mouse command.
+inline int
+usb_mouse_command(int command, u8 *param)
+{
+ if (! CONFIG_USB_MOUSE)
+ return -1;
+ dprintf(9, "usb mouse cmd=%x\n", command);
+ switch (command) {
+ case PSMOUSE_CMD_ENABLE:
+ case PSMOUSE_CMD_DISABLE:
+ case PSMOUSE_CMD_SETSCALE11:
+ return 0;
+ case PSMOUSE_CMD_SETSCALE21:
+ case PSMOUSE_CMD_SETRATE:
+ case PSMOUSE_CMD_SETRES:
+ // XXX
+ return 0;
+ case PSMOUSE_CMD_RESET_BAT:
+ case PSMOUSE_CMD_GETID:
+ // Return the id of a standard AT mouse.
+ param[0] = 0xaa;
+ param[1] = 0x00;
+ return 0;
+
+ case PSMOUSE_CMD_GETINFO:
+ param[0] = 0x00;
+ param[1] = 4;
+ param[2] = 100;
+ return 0;
+
+ default:
+ return -1;
+ }
+}
+
+// Check for USB events pending - called periodically from timer interrupt.
+void
+usb_check_event(void)
+{
+ usb_check_key();
+ usb_check_mouse();
+}