static void pnp_enter_conf_state(device_t dev);
static void pnp_exit_conf_state(device_t dev);
-static void dump_pnp_device(device_t dev);
+//static void dump_pnp_device(device_t dev);
struct chip_operations superio_smsc_lpc47m10x_ops = {
CHIP_NAME("SMSC LPC47M10x Super I/O")
{ &ops, LPC47M10X2_KBC, PNP_IO0 | PNP_IO1 | PNP_IRQ0 | PNP_IRQ1, { 0x7ff, 0 }, { 0x7ff, 0x4}, },
};
-/**********************************************************************************/
-/* PUBLIC INTERFACE */
-/**********************************************************************************/
-
-/*
- * Function: enable_dev
- * Parameters: dev - pointer to structure describing a Super I/O device
- * Return Value: None
- * Description: Create device structures and allocate resources to devices
- * specified in the pnp_dev_info array (above).
+/**
+ * Create device structures and allocate resources to devices specified in the
+ * pnp_dev_info array (above).
+ *
+ * @param dev Pointer to structure describing a Super I/O device.
*/
static void enable_dev(device_t dev)
{
- pnp_enable_devices(dev, &pnp_ops,
- ARRAY_SIZE(pnp_dev_info),
+ pnp_enable_devices(dev, &pnp_ops, ARRAY_SIZE(pnp_dev_info),
pnp_dev_info);
}
-/*
- * Function: lpc47m10x_pnp_set_resources
- * Parameters: dev - pointer to structure describing a Super I/O device
- * Return Value: None
- * Description: Configure the specified Super I/O device with the resources
- * (I/O space, etc.) that have been allocated for it.
+/**
+ * Configure the specified Super I/O device with the resources (I/O space,
+ * etc.) that have been allocated for it.
+ *
+ * @param dev Pointer to structure describing a Super I/O device.
*/
static void lpc47m10x_pnp_set_resources(device_t dev)
{
pnp_exit_conf_state(dev);
}
-/*
- * Function: lpc47m10x_init
- * Parameters: dev - pointer to structure describing a Super I/O device
- * Return Value: None
- * Description: Initialize the specified Super I/O device.
- * Devices other than COM ports and the keyboard controller are
- * ignored. For COM ports, we configure the baud rate.
+/**
+ * Initialize the specified Super I/O device.
+ *
+ * Devices other than COM ports and the keyboard controller are ignored.
+ * For COM ports, we configure the baud rate.
+ *
+ * @param dev Pointer to structure describing a Super I/O device.
*/
static void lpc47m10x_init(device_t dev)
{
struct superio_smsc_lpc47m10x_config *conf = dev->chip_info;
- struct resource *res0, *res1;
+ struct resource *res0;
if (!dev->enabled)
return;
break;
case LPC47M10X2_KBC:
- res0 = find_resource(dev, PNP_IDX_IO0);
- res1 = find_resource(dev, PNP_IDX_IO1);
pc_keyboard_init(&conf->keyboard);
break;
}
}
-/**********************************************************************************/
-/* PRIVATE FUNCTIONS */
-/**********************************************************************************/
-
-/*
- * Function: pnp_enter_conf_state
- * Parameters: dev - pointer to structure describing a Super I/O device
- * Return Value: None
- * Description: Enable access to the LPC47M10X2's configuration registers.
- */
+/** Enable access to the LPC47M10X2's configuration registers. */
static void pnp_enter_conf_state(device_t dev)
{
outb(0x55, dev->path.pnp.port);
}
-/*
- * Function: pnp_exit_conf_state
- * Parameters: dev - pointer to structure describing a Super I/O device
- * Return Value: None
- * Description: Disable access to the LPC47M10X2's configuration registers.
- */
+/** Disable access to the LPC47M10X2's configuration registers. */
static void pnp_exit_conf_state(device_t dev)
{
outb(0xaa, dev->path.pnp.port);
}
#if 0
-/*
- * Function: dump_pnp_device
- * Parameters: dev - pointer to structure describing a Super I/O device
- * Return Value: None
- * Description: Print the values of all of the LPC47M10X2's configuration registers.
- * NOTE: The LPC47M10X2 must be in configuration mode when this
- * function is called.
+/**
+ * Print the values of all of the LPC47M10X2's configuration registers.
+ *
+ * NOTE: The LPC47M10X2 must be in config mode when this function is called.
+ *
+ * @param dev Pointer to structure describing a Super I/O device.
*/
static void dump_pnp_device(device_t dev)
{
int register_index;
- print_debug("\r\n");
+ print_debug("\n");
for(register_index = 0; register_index <= LPC47M10X2_MAX_CONFIG_REGISTER; register_index++) {
uint8_t register_value;
print_debug_char(' ');
print_debug_hex8(register_value);
if ((register_index & 0x0f) == 0x0f) {
- print_debug("\r\n");
+ print_debug("\n");
}
}
- print_debug("\r\n");
+ print_debug("\n");
}
#endif