#include <stream/read_bytes.h>
#include <string.h>
+/* if they set the precompressed rom stream, they better have set a type */
+#if CONFIG_PRECOMPRESSED_PAYLOAD && ((!CONFIG_COMPRESSED_PAYLOAD_NRV2B) && (!CONFIG_COMPRESSED_PAYLOAD_LZMA))
+#error "You set CONFIG_PRECOMPRESSED_PAYLOAD but need to set CONFIG_COMPRESSED_PAYLOAD_NRV2B or CONFIG_COMPRESSED_PAYLOAD_LZMA"
+#endif
+
+/* If they set ANY of these, then we're compressed */
+#if ((CONFIG_COMPRESSED_PAYLOAD_NRV2B) || (CONFIG_COMPRESSED_PAYLOAD_LZMA))
+#define UNCOMPRESSER 1
+extern unsigned char _heap, _eheap;
+#endif
+
+#if (CONFIG_COMPRESSED_PAYLOAD_NRV2B)
+#define HAVE_UNCOMPRESSER 1
+// include generic nrv2b
+#include "../lib/nrv2b.c"
+#endif
+
+#if (CONFIG_COMPRESSED_PAYLOAD_LZMA)
+#if HAVE_UNCOMPRESSER
+#error "You're defining more than one compression type, which is not allowed (of course)"
+#endif
+#define HAVE_UNCOMPRESSER 1
+// include generic nrv2b
+#include "../lib/lzma.c"
+#endif
-#ifndef CONFIG_ROM_STREAM_START
-#define CONFIG_ROM_STREAM_START 0xffff0000UL
+#ifndef CONFIG_ROM_PAYLOAD_START
+#define CONFIG_ROM_PAYLOAD_START 0xffff0000UL
#endif
-/* well, this is a mess, and it will get fixed, but not right away.
- * until we stop using 'ld' for building the rom image, that is.
- * problem is, that on the sc520, ROM_STREAM_START has to be at 0x2000000.
- * but if you set CONFIG_ROM_STREAM_START to that, then ld will try to
- * build a giant image: 0x0-0x2000000, i.e. almost 4 GB.
- * so make this non-static, non-const for now.
+/* well, this is a mess, and it will get fixed, but not right away.
+ * until we stop using 'ld' for building the rom image, that is.
+ * problem is, that on the sc520, ROM_PAYLOAD_START has to be at 0x2000000.
+ * but if you set CONFIG_ROM_PAYLOAD_START to that, then ld will try to
+ * build a giant image: 0x0-0x2000000, i.e. almost 4 GB.
+ * so make this non-static, non-const for now.
*/
/*XXXXXXXXXXXXXX */
-/*static const */unsigned char *rom_start = (unsigned char *)CONFIG_ROM_STREAM_START;
-/*static const */unsigned char *rom_end = (unsigned char *)(CONFIG_ROM_STREAM_START + PAYLOAD_SIZE - 1);
+/*static const */unsigned char *rom_start = (unsigned char *)CONFIG_ROM_PAYLOAD_START;
+/*static const */unsigned char *rom_end = (unsigned char *)(CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE - 1);
/*XXXXXXXXXXXXXX */
+
static const unsigned char *rom;
+#if UNCOMPRESSER
+unsigned long
+uncompress(uint8_t * rom_start, uint8_t *dest )
+{
+#if (CONFIG_COMPRESSED_PAYLOAD_NRV2B)
+ unsigned long ilen; // used compressed stream length
+ return unrv2b(rom_start, dest, &ilen);
+#endif
+#if (CONFIG_COMPRESSED_PAYLOAD_LZMA)
+ return ulzma(rom_start, dest);
+#endif
+}
+#endif
int stream_init(void)
{
- rom = rom_start;
+#if (UNCOMPRESSER)
+ unsigned char *dest;
+ unsigned long olen;
+#endif
- printk_debug("%6d:%s() - rom_stream: 0x%08lx - 0x%08lx\n",
- __LINE__, __FUNCTION__,
+ printk_debug("rom_stream: 0x%08lx - 0x%08lx\n",
(unsigned long)rom_start,
(unsigned long)rom_end);
+
+#if (UNCOMPRESSER)
+
+ dest = &_eheap; /* need a good address on RAM */
+
+#if _RAMBASE<0x00100000
+ olen = *(unsigned int *)dest;
+#if (CONFIG_CONSOLE_VGA==1) || (CONFIG_PCI_ROM_RUN == 1)
+ if((dest < 0xa0000) && ((dest+olen)>0xa0000)) {
+ dest = (CONFIG_LB_MEM_TOPK<<10);
+ }
+#endif
+ if((dest < (unsigned char *) 0xf0000) && ((dest+olen)> (unsigned char *)0xf0000)) { // coreboot tables etc
+ dest = (unsigned char *) (CONFIG_LB_MEM_TOPK<<10);
+ }
+#endif
+
+ /* ALL of those settings are too smart and also unsafe. Set the dest to 16 MB:
+ * known to be safe for LB for now, and mostly safe for all elf images we have tried.
+ * long term, this has got to be fixed.
+ */
+ dest = (unsigned char *) (16 * 1024 * 1024);
+ printk_debug("Uncompressing to RAM 0x%08lx ", dest);
+ olen = uncompress((uint8_t *) rom_start, (uint8_t *)dest );
+ printk_debug(" olen = 0x%08lx done.\n", olen);
+ rom_end = dest + olen - 1;
+ rom = dest;
+#else
+ rom = rom_start;
+#endif
+
return 0;
}
{
byte_offset_t bytes;
bytes = count;
- if ((rom + bytes) > rom_end) {
+ if ((rom + bytes - 1) > rom_end) {
printk_warning("%6d:%s() - overflowed source buffer\n",
__LINE__, __FUNCTION__);
bytes = 0;