#define SMBUS_IO_BASE 0x6000
/* initialization for SMBus Controller */
-static int cs5535_enable_smbus(void)
+static void cs5535_enable_smbus(void)
{
unsigned char val;
+ /* reset SMBUS controller */
outb(0, SMBUS_IO_BASE + SMB_CTRL2);
/* Set SCL freq and enable SMB controller */
val = inb(SMBUS_IO_BASE + SMB_CTRL2);
- val |= ((0x7F << 1) | SMB_CTRL2_ENABLE);
+ val |= ((0x20 << 1) | SMB_CTRL2_ENABLE);
outb(val, SMBUS_IO_BASE + SMB_CTRL2);
/* Setup SMBus host controller address to 0xEF */
val = inb(SMBUS_IO_BASE + SMB_ADD);
val |= (0xEF | SMB_ADD_SAEN);
- outb(val, SMBUS_IO_BASE + SMB_ADD);
-
-#if 0
- print_debug("SMBUS registers ");
- print_debug_hex8(inb(SMBUS_IO_BASE));
- print_debug(" ");
- print_debug_hex8(inb(SMBUS_IO_BASE + 1));
- print_debug(" ");
- print_debug_hex8(inb(SMBUS_IO_BASE + 2));
- print_debug(" ");
- print_debug_hex8(inb(SMBUS_IO_BASE + 3));
- print_debug(" ");
- print_debug_hex8(inb(SMBUS_IO_BASE + 4));
- print_debug(" ");
- print_debug_hex8(inb(SMBUS_IO_BASE + 5));
- print_debug(" ");
- print_debug_hex8(inb(SMBUS_IO_BASE + 6));
- print_debug("\n\r");
-#endif
-}
-
-#if 0
-static int smbus_recv_byte(unsigned device)
-{
- return do_smbus_recv_byte(SMBUS_IO_BASE, device);
-}
-
-static int smbus_send_byte(unsigned device, unsigned char val)
-{
- return do_smbus_send_byte(SMBUS_IO_BASE, device, val);
-}
-
-static int smbus_read_byte(unsigned device, unsigned address)
-{
- return do_smbus_read_byte(SMBUS_IO_BASE, device, address);
-}
-
-static int smbus_write_byte(unsigned device, unsigned address, unsigned char val)
-{
- return do_smbus_write_byte(SMBUS_IO_BASE, device, address, val);
+ outb(val, SMBUS_IO_BASE + SMB_ADD);
}
-#endif