Do garbage collection of unused sections.
[seabios.git] / src / smm.c
index 2f247428ecadc07458ec835cab7270ad9bcf3d43..31e56d8c285bac984ed6bcec65407ac88ff1a2c8 100644 (file)
--- a/src/smm.c
+++ b/src/smm.c
-/*
- * smm.c
- * SMM support for BIOS.
- * 
- * Copyright (C) 2002  MandrakeSoft S.A.
- * Copyright (C) 2008  Nguyen Anh Quynh <aquynh@gmail.com>
- * 
- * This file may be distributed under the terms of the GNU GPLv3 license.
- */
-
-#include "types.h"
-#include "pci.h"
-#include "smm.h" // smm_init
+// System Management Mode support (on emulators)
+//
+// Copyright (C) 2008  Kevin O'Connor <kevin@koconnor.net>
+// Copyright (C) 2006 Fabrice Bellard
+//
+// This file may be distributed under the terms of the GNU LGPLv3 license.
+
+#include "pci.h" // pci_config_writel
+#include "util.h" // wbinvd
 #include "config.h" // CONFIG_*
-#include "util.h" // memcpy
-
-#ifdef CONFIG_SMM
-
-asm (
-"    .global smm_relocation_start                               \n"
-"    .global smm_relocation_end                                 \n"
-"    .global smm_code_start                                     \n"
-"    .global smm_code_end                                       \n"
-"                                                               \n"
-"    .code16                                                    \n"
-"    /* code to relocate SMBASE to 0xa0000 */                   \n"
-"smm_relocation_start:                                          \n"
-"    movl $0x38000 + 0x7efc, %ebx                               \n"
-"    /* revision ID to see if x86_64 or x86 */                  \n"
-"    mov (%ebx), %al                                            \n"
-"    cmpb $0x64, %al                                            \n"
-"    je 1f                                                      \n"
-"    movl $0x38000 + 0x7ef8, %ebx                               \n"
-"    jmp 2f                                                     \n"
-"1:                                                             \n"
-"    movl $0x38000 + 0x7f00, %ebx                               \n"
-"2:                                                             \n"
-"    movl $0xa0000, %eax                                        \n"
-"    movl %eax, (%ebx)                                          \n"
-"    /* indicate to the BIOS that the SMM code was executed */  \n"
-"    mov $0x00, %al                                             \n"
-"    movw $0xb3, %dx                                            \n"
-"    outb %al, %dx                                              \n"
-"    rsm                                                        \n"
-"smm_relocation_end:                                            \n"
-"                                                               \n"
-"    /* minimal SMM code to enable or disable ACPI */           \n"
-"smm_code_start:                                                \n"
-"    movw $0xb2, %dx                                            \n"
-"    inb %dx, %al                                               \n"
-"    cmp $0xf0, %al                                             \n"
-"    jne 1f                                                     \n"
-"                                                               \n"
-"    /* ACPI disable */                                         \n"
-"    //mov $PM_IO_BASE + 0x04, %dx /* PMCNTRL */                \n"
-"    mov $0xb000 + 0x04, %dx /* PMCNTRL */                      \n"
-"    inw %dx, %ax                                               \n"
-"    andw $~1, %ax                                              \n"
-"    outw %ax, %dx                                              \n"
-"                                                               \n"
-"    jmp 2f                                                     \n"
-"1:                                                             \n"
-"    cmp $0xf1, %al                                             \n"
-"    jne 2f                                                     \n"
-"                                                               \n"
-"    /* ACPI enable */                                          \n"
-"    //mov $PM_IO_BASE + 0x04, %dx /* PMCNTRL */                \n"
-"    mov $0xb000 + 0x04, %dx /* PMCNTRL */                      \n"
-"    inw %dx, %ax                                               \n"
-"    orw $1, %ax                                                \n"
-"    outw %ax, %dx                                              \n"
-"                                                               \n"
-"2:                                                             \n"
-"    rsm                                                        \n"
-"smm_code_end:                                                  \n"
-"    .code32                                                    \n"
+#include "ioport.h" // outb
+#include "pci_ids.h" // PCI_VENDOR_ID_INTEL
+
+ASM32(
+    ".global smm_relocation_start\n"
+    ".global smm_relocation_end\n"
+    ".global smm_code_start\n"
+    ".global smm_code_end\n"
+    "  .code16\n"
+
+    /* code to relocate SMBASE to 0xa0000 */
+    "smm_relocation_start:\n"
+    "  mov $" __stringify(BUILD_SMM_INIT_ADDR) " + 0x7efc, %ebx\n"
+    "  addr32 mov (%ebx), %al\n"  /* revision ID to see if x86_64 or x86 */
+    "  cmp $0x64, %al\n"
+    "  je 1f\n"
+    "  mov $" __stringify(BUILD_SMM_INIT_ADDR) " + 0x7ef8, %ebx\n"
+    "  jmp 2f\n"
+    "1:\n"
+    "  mov $" __stringify(BUILD_SMM_INIT_ADDR) " + 0x7f00, %ebx\n"
+    "2:\n"
+    "  movl $" __stringify(BUILD_SMM_ADDR) " - 0x8000, %eax\n"
+    "  addr32 movl %eax, (%ebx)\n"
+    /* indicate to the BIOS that the SMM code was executed */
+    "  mov $0x00, %al\n"
+    "  movw $" __stringify(PORT_SMI_STATUS) ", %dx\n"
+    "  outb %al, %dx\n"
+    "  rsm\n"
+    "smm_relocation_end:\n"
+
+    /* minimal SMM code to enable or disable ACPI */
+    "smm_code_start:\n"
+    "  movw $" __stringify(PORT_SMI_CMD) ", %dx\n"
+    "  inb %dx, %al\n"
+    "  cmp $0xf0, %al\n"
+    "  jne 1f\n"
+
+    /* ACPI disable */
+    "  mov $" __stringify(PORT_ACPI_PM_BASE) " + 0x04, %dx\n" /* PMCNTRL */
+    "  inw %dx, %ax\n"
+    "  andw $~1, %ax\n"
+    "  outw %ax, %dx\n"
+
+    "  jmp 2f\n"
+
+    "1:\n"
+    "  cmp $0xf1, %al\n"
+    "  jne 2f\n"
+
+    /* ACPI enable */
+    "  mov $" __stringify(PORT_ACPI_PM_BASE) " + 0x04, %dx\n" /* PMCNTRL */
+    "  inw %dx, %ax\n"
+    "  orw $1, %ax\n"
+    "  outw %ax, %dx\n"
+
+    "2:\n"
+    "  rsm\n"
+    "smm_code_end:\n"
+    "  .code32\n"
     );
 
 extern u8 smm_relocation_start, smm_relocation_end;
 extern u8 smm_code_start, smm_code_end;
 
 void
-smm_init(PCIDevice *d)
+smm_init()
 {
-    u32 value;
+    if (CONFIG_COREBOOT)
+        // SMM only supported on emulators.
+        return;
+    if (!CONFIG_USE_SMM)
+        return;
+
+    dprintf(3, "init smm\n");
+
+    // This code is hardcoded for PIIX4 Power Management device.
+    int bdf = pci_find_device(PCI_VENDOR_ID_INTEL
+                              , PCI_DEVICE_ID_INTEL_82371AB_3);
+    if (bdf < 0)
+        // Device not found
+        return;
+    int i440_bdf = pci_find_device(PCI_VENDOR_ID_INTEL
+                                   , PCI_DEVICE_ID_INTEL_82441);
+    if (i440_bdf < 0)
+        return;
 
     /* check if SMM init is already done */
-    value = pci_config_readl(d, 0x58);
-    if ((value & (1 << 25)) == 0) {
-        /* copy the SMM relocation code */
-        memcpy((void *)0x38000, &smm_relocation_start,
-               &smm_relocation_end - &smm_relocation_start);
+    u32 value = pci_config_readl(bdf, 0x58);
+    if (value & (1 << 25))
+        return;
+
+    /* enable the SMM memory window */
+    pci_config_writeb(i440_bdf, 0x72, 0x02 | 0x48);
+
+    /* save original memory content */
+    memcpy((void *)BUILD_SMM_ADDR, (void *)BUILD_SMM_INIT_ADDR, BUILD_SMM_SIZE);
+
+    /* copy the SMM relocation code */
+    memcpy((void *)BUILD_SMM_INIT_ADDR, &smm_relocation_start,
+           &smm_relocation_end - &smm_relocation_start);
 
-        /* enable SMI generation when writing to the APMC register */
-        pci_config_writel(d, 0x58, value | (1 << 25));
+    /* enable SMI generation when writing to the APMC register */
+    pci_config_writel(bdf, 0x58, value | (1 << 25));
 
-        /* init APM status port */
-        outb(0x01, 0xb3);
+    /* init APM status port */
+    outb(0x01, PORT_SMI_STATUS);
 
-        /* raise an SMI interrupt */
-        outb(0x00, 0xb2);
+    /* raise an SMI interrupt */
+    outb(0x00, PORT_SMI_CMD);
 
-        /* wait until SMM code executed */
-        while (inb(0xb3) != 0x00);
+    /* wait until SMM code executed */
+    while (inb(PORT_SMI_STATUS) != 0x00)
+        ;
 
-        /* enable the SMM memory window */
-        pci_config_writeb(&i440_pcidev, 0x72, 0x02 | 0x48);
+    /* restore original memory content */
+    memcpy((void *)BUILD_SMM_INIT_ADDR, (void *)BUILD_SMM_ADDR, BUILD_SMM_SIZE);
 
-        /* copy the SMM code */
-        memcpy((void *)0xa8000, &smm_code_start,
-               &smm_code_end - &smm_code_start);
-        wbinvd();
+    /* copy the SMM code */
+    memcpy((void *)BUILD_SMM_ADDR, &smm_code_start
+           , &smm_code_end - &smm_code_start);
+    wbinvd();
 
-        /* close the SMM memory window and enable normal SMM */
-        pci_config_writeb(&i440_pcidev, 0x72, 0x02 | 0x08);
-    }
+    /* close the SMM memory window and enable normal SMM */
+    pci_config_writeb(i440_bdf, 0x72, 0x02 | 0x08);
 }
-#endif