****************************************************************/
.code16gcc
-.include "out/ccode.16.s"
+#include "ccode.16.s"
#include "config.h" // CONFIG_*
#include "ioport.h" // PORT_A20
#include "bregs.h" // CR0_*
#include "cmos.h" // CMOS_RESET_CODE
-#include "../out/asm-offsets.h" // BREGS_*
+#include "asm-offsets.h" // BREGS_*
#include "entryfuncs.S" // ENTRY_*
/****************************************************************
- * POST entry point
+ * Misc. entry points.
****************************************************************/
- DECLFUNC entry_post
-entry_post:
- // Enable cache
- movl %cr0, %eax
- andl $~(CR0_CD|CR0_NW), %eax
- movl %eax, %cr0
-
+// Resume (and reboot) entry point - called from entry_post
+ DECLFUNC entry_resume
+entry_resume:
// Disable interrupts
cli
cld
-
- // Check for restart indicator.
- movl $CMOS_RESET_CODE|NMI_DISABLE_BIT, %eax
- outb %al, $PORT_CMOS_INDEX
- inb $PORT_CMOS_DATA, %al
- cmpb $0x0, %al
- jnz 1f
-
- // Normal entry point
- ENTRY_INTO32 _cfunc32flat__start
-
- // Entry point when a post call looks like a resume.
-1:
- // Save old shutdown status.
- movl %eax, %ebx
-
- // Clear shutdown status register.
- movl $CMOS_RESET_CODE|NMI_DISABLE_BIT, %eax
- outb %al, $PORT_CMOS_INDEX
- xorl %eax, %eax
- outb %al, $PORT_CMOS_DATA
-
// Use a stack in EBDA
movw $SEG_BDA, %ax
movw %ax, %ds
movw BDA_ebda_seg, %ax
-
- cmpw $EBDA_SEGMENT_START, %ax
- jle 2f
- // EBDA segment doesn't look valid - use startup value.
- movw $EBDA_SEGMENT_START, %ax
-
-2: movw %ax, %ds
+ movw %ax, %ds
movw %ax, %ss
movl $EBDA_OFFSET_TOP_STACK, %esp
-
// Call handler.
- movl %ebx, %eax
jmp handle_resume
-
-/****************************************************************
- * Misc. entry points.
- ****************************************************************/
-
// PMM entry point
DECLFUNC entry_pmm
entry_pmm:
pushw %ds
movw %ss, %cx // Move %ss to %ds
movw %cx, %ds
- leal 28(%esp), %eax // %eax points to start of args
- calll handle_pmm
+ movl $_cfunc32flat_handle_pmm, %eax // Setup: call32(handle_pmm, args, -1)
+ leal 28(%esp), %edx // %edx points to start of args
+ movl $-1, %ecx
+ calll call32
movw %ax, 12(%esp) // Modify %ax:%dx to return %eax
shrl $16, %eax
movw %ax, 4(%esp)
lretw
// APM entry points
- DECLFUNC apm16protected_entry
-apm16protected_entry:
+ DECLFUNC entry_apm16
+entry_apm16:
pushfw // save flags
pushl %eax // dummy
ENTRY_ARG handle_apm16
lretw
.code32
- DECLFUNC apm32protected_entry
-apm32protected_entry:
+ DECLFUNC entry_apm32
+entry_apm32:
pushfl
pushl %gs
pushl %cs // Move second descriptor after %cs to %gs
lretl
// PCI-BIOS 32bit entry point
- DECLFUNC pcibios32_entry
-pcibios32_entry:
+ DECLFUNC entry_pcibios32
+entry_pcibios32:
pushfl
pushl %gs // Backup %gs and set %gs=%ds
pushl %ds
lretl
// BIOS32 support
- EXPORTFUNC bios32_entry
-bios32_entry:
+ EXPORTFUNC entry_bios32
+entry_bios32:
pushfl
#if CONFIG_PCIBIOS
// Check for PCI-BIOS request
jne 1f
movl $BUILD_BIOS_ADDR, %ebx
movl $BUILD_BIOS_SIZE, %ecx
- movl $pcibios32_entry, %edx
+ movl $entry_pcibios32, %edx
xorb %al, %al
jmp 2f
#endif
lretl
// 32bit elf entry point
- EXPORTFUNC post32
-post32:
+ EXPORTFUNC entry_elf
+entry_elf:
cli
cld
lidtl (BUILD_BIOS_ADDR + pmode_IDT_info)
movw %ax, %gs
movw %ax, %ss
movl $BUILD_STACK_ADDR, %esp
- ljmpl $SEG32_MODE32_CS, $_cfunc32flat__start
+ ljmpl $SEG32_MODE32_CS, $_cfunc32flat_handle_post
.code16gcc
.endm
ORG 0xe05b
-entry_post_official:
- jmp entry_post
+entry_post:
+ cmpl $0, %cs:HaveRunPost // Check for resume/reboot
+ jnz entry_resume
+ ENTRY_INTO32 _cfunc32flat_handle_post // Normal entry point
ORG 0xe2c3
IRQ_ENTRY 02
ORG 0xfff0 // Power-up Entry Point
.global reset_vector
reset_vector:
- ljmpw $SEG_BIOS, $entry_post_official
+ ljmpw $SEG_BIOS, $entry_post
// 0xfff5 - BiosDate in misc.c