****************************************************************/
.code16gcc
-.include "out/ccode.16.s"
+#include "ccode.16.s"
#include "config.h" // CONFIG_*
#include "ioport.h" // PORT_A20
#include "bregs.h" // CR0_*
#include "cmos.h" // CMOS_RESET_CODE
-#include "../out/asm-offsets.h" // BREGS_*
+#include "asm-offsets.h" // BREGS_*
#include "entryfuncs.S" // ENTRY_*
****************************************************************/
// Place CPU into 32bit mode from 16bit mode.
-// Clobbers: flags, segment registers, cr0, idt/gdt
+// %edx = return location (in 32bit mode)
+// Clobbers: ecx, flags, segment registers, cr0, idt/gdt
DECLFUNC transition32
transition32:
- pushl %eax
+ movl %eax, %ecx
// Disable irqs (and clear direction flag)
cli
movw %ax, %fs
movw %ax, %gs
- popl %eax
- retl
+ movl %ecx, %eax
+ jmpl *%edx
-// Call a 16bit function from 32bit mode.
-// %eax = address of struct bregs
-// Clobbers: %e[bcd]x, %e[ds]i, flags, segment registers, idt/gdt
- DECLFUNC __call16_from32
- .global __call16big_from32
-__call16_from32:
- pushl %eax
+// Place CPU into 16bit mode from 32bit mode.
+// %edx = return location (in 16bit mode)
+// Clobbers: ecx, flags, segment registers, cr0, idt/gdt
+ DECLFUNC transition16
+ .global transition16big
+transition16:
+ movl %eax, %ecx
// restore data segment limits to 0xffff
movl $SEG32_MODE16_DS, %eax
// Jump to 16bit mode
ljmpw $SEG32_MODE16_CS, $1f
-__call16big_from32:
- pushl %eax
+transition16big:
+ movl %eax, %ecx
movl $SEG32_MODE16BIG_DS, %eax
movw %ax, %ds
movw %ax, %fs
movw %ax, %gs
- ljmpl $SEG32_MODE16BIG_CS, $(BUILD_BIOS_ADDR + 1f)
+ ljmpw $SEG32_MODE16BIG_CS, $1f
.code16gcc
1:
movw %ax, %ds
movw %ax, %ss // Assume stack is in segment 0
- popl %eax
-
- // Make call.
- calll __call16
-
- // Return via transition32
- jmp transition32
-
+ movl %ecx, %eax
+ jmpl *%edx
// Call a 16bit function from 16bit mode with a specified cpu register state
// %eax = address of struct bregs
retl
+// Call a 16bit function from 32bit mode.
+// %eax = address of struct bregs
+// Clobbers: %e[bcd]x, %e[ds]i, flags, segment registers, idt/gdt
+ DECLFUNC __call16_from32
+ .global __call16big_from32
+ .code32
+__call16_from32:
+ movl $1f, %edx
+ jmp transition16
+__call16big_from32:
+ movl $1f, %edx
+ jmp transition16big
+
+ // Make call.
+ .code16gcc
+1: calll __call16
+ // Return via transition32
+ movl $(2f + BUILD_BIOS_ADDR), %edx
+ jmp transition32
+ .code32
+2: retl
+
+ .code16gcc
// IRQ trampolines
.macro IRQ_TRAMPOLINE num
DECLFUNC irq_trampoline_0x\num
/****************************************************************
- * POST entry point
+ * Misc. entry points.
****************************************************************/
- DECLFUNC entry_post
-entry_post:
- // Enable cache
- movl %cr0, %eax
- andl $~(CR0_CD|CR0_NW), %eax
- movl %eax, %cr0
-
+// Resume (and reboot) entry point - called from entry_post
+ DECLFUNC entry_resume
+entry_resume:
// Disable interrupts
cli
cld
-
- // Check for restart indicator.
- movl $CMOS_RESET_CODE|NMI_DISABLE_BIT, %eax
- outb %al, $PORT_CMOS_INDEX
- inb $PORT_CMOS_DATA, %al
- cmpb $0x0, %al
- jnz 1f
-
- // Normal entry point
- ENTRY_INTO32 _start
-
- // Entry point when a post call looks like a resume.
-1:
- // Save old shutdown status.
- movl %eax, %ebx
-
- // Clear shutdown status register.
- movl $CMOS_RESET_CODE|NMI_DISABLE_BIT, %eax
- outb %al, $PORT_CMOS_INDEX
- xorl %eax, %eax
- outb %al, $PORT_CMOS_DATA
-
// Use a stack in EBDA
movw $SEG_BDA, %ax
movw %ax, %ds
movw BDA_ebda_seg, %ax
-
- cmpw $EBDA_SEGMENT_START, %ax
- jle 2f
- // EBDA segment doesn't look valid - use startup value.
- movw $EBDA_SEGMENT_START, %ax
-
-2: movw %ax, %ds
+ movw %ax, %ds
movw %ax, %ss
movl $EBDA_OFFSET_TOP_STACK, %esp
-
// Call handler.
- movl %ebx, %eax
jmp handle_resume
-
-/****************************************************************
- * Misc. entry points.
- ****************************************************************/
-
// PMM entry point
DECLFUNC entry_pmm
entry_pmm:
pushw %ds
movw %ss, %cx // Move %ss to %ds
movw %cx, %ds
- lea 28(%esp), %eax // %eax points to start of args
- calll handle_pmm
+ movl $_cfunc32flat_handle_pmm, %eax // Setup: call32(handle_pmm, args, -1)
+ leal 28(%esp), %edx // %edx points to start of args
+ movl $-1, %ecx
+ calll call32
movw %ax, 12(%esp) // Modify %ax:%dx to return %eax
shrl $16, %eax
movw %ax, 4(%esp)
pushw %ds
movw %ss, %cx // Move %ss to %ds
movw %cx, %ds
- lea 28(%esp), %eax // %eax points to start of u16 args
+ leal 28(%esp), %eax // %eax points to start of u16 args
calll handle_pnp
movw %ax, 12(%esp) // Modify %eax to return %ax
popw %ds
lretw
// APM entry points
- DECLFUNC apm16protected_entry
-apm16protected_entry:
+ DECLFUNC entry_apm16
+entry_apm16:
pushfw // save flags
pushl %eax // dummy
- ENTRY_ARG handle_1553
+ ENTRY_ARG handle_apm16
addw $4, %sp // pop dummy
popfw // restore flags
lretw
.code32
- DECLFUNC apm32protected_entry
-apm32protected_entry:
- pushfw
- pushw %cs // Setup for long jump to 16bit mode
- pushw $1f
- addw $8, 2(%esp)
- ljmpw *(%esp)
- .code16gcc
-1:
- ENTRY_ARG_ESP handle_1553
+ DECLFUNC entry_apm32
+entry_apm32:
+ pushfl
+ pushl %gs
+ pushl %cs // Move second descriptor after %cs to %gs
+ addl $16, (%esp)
+ popl %gs
+ ENTRY_ARG_ESP _cfunc32seg_handle_apm32
+ popl %gs
+ popfl
+ lretl
- movw $2f,(%esp) // Setup for long jump back to 32bit mode
- subw $8, 2(%esp)
- ljmpw *(%esp)
- .code32
-2:
- addl $4, %esp // pop call address
- popfw
+// PCI-BIOS 32bit entry point
+ DECLFUNC entry_pcibios32
+entry_pcibios32:
+ pushfl
+ pushl %gs // Backup %gs and set %gs=%ds
+ pushl %ds
+ popl %gs
+ ENTRY_ARG_ESP _cfunc32seg_handle_pcibios32
+ popl %gs
+ popfl
+ lretl
+
+// BIOS32 support
+ EXPORTFUNC entry_bios32
+entry_bios32:
+ pushfl
+#if CONFIG_PCIBIOS
+ // Check for PCI-BIOS request
+ cmpl $0x49435024, %eax // $PCI
+ jne 1f
+ movl $BUILD_BIOS_ADDR, %ebx
+ movl $BUILD_BIOS_SIZE, %ecx
+ movl $entry_pcibios32, %edx
+ xorb %al, %al
+ jmp 2f
+#endif
+ // Unknown request
+1: movb $0x80, %al
+ // Return to caller
+2: popfl
lretl
// 32bit elf entry point
- EXPORTFUNC post32
-post32:
+ EXPORTFUNC entry_elf
+entry_elf:
cli
cld
lidtl (BUILD_BIOS_ADDR + pmode_IDT_info)
movw %ax, %gs
movw %ax, %ss
movl $BUILD_STACK_ADDR, %esp
- ljmpl $SEG32_MODE32_CS, $_start
+ ljmpl $SEG32_MODE32_CS, $_cfunc32flat_handle_post
.code16gcc
* Interrupt entry points
****************************************************************/
+ // Main entry point for interrupts without args
+ DECLFUNC irqentry
+irqentry:
+ ENTRY_ST
+ iretw
+
+ // Main entry point for interrupts with args
+ DECLFUNC irqentryarg
+irqentryarg:
+ ENTRY_ARG_ST
+ iretw
+
// Define an entry point for an interrupt (no args passed).
.macro IRQ_ENTRY num
.global entry_\num
jmp irqentry
.endm
+ .macro DECL_IRQ_ENTRY num
+ DECLFUNC entry_\num
+ IRQ_ENTRY \num
+ .endm
+
// Define an entry point for an interrupt (can read/modify args).
.macro IRQ_ENTRY_ARG num
.global entry_\num
jmp irqentryarg
.endm
- // Macros that put each handler into its own section
- .macro DECL_IRQ_ENTRY num
- DECLFUNC entry_\num
- IRQ_ENTRY \num
- .endm
.macro DECL_IRQ_ENTRY_ARG num
DECLFUNC entry_\num
IRQ_ENTRY_ARG \num
.endm
- // Main entry point for interrupts without args
- DECLFUNC irqentry
-irqentry:
- ENTRY_ST
- iretw
-
- // Main entry point for interrupts with args
- DECLFUNC irqentryarg
-irqentryarg:
- ENTRY_ARG_ST
- iretw
-
+ // Various entry points (that don't require a fixed location).
DECL_IRQ_ENTRY_ARG 13
DECL_IRQ_ENTRY 76
DECL_IRQ_ENTRY 70
// int 18/19 are special - they reset stack and call into 32bit mode.
DECLFUNC entry_19
entry_19:
- ENTRY_INTO32 handle_19
+ ENTRY_INTO32 _cfunc32flat_handle_19
DECLFUNC entry_18
entry_18:
- ENTRY_INTO32 handle_18
+ ENTRY_INTO32 _cfunc32flat_handle_18
/****************************************************************
.endm
ORG 0xe05b
-entry_post_official:
- jmp entry_post
+entry_post:
+ cmpl $0, %cs:HaveRunPost // Check for resume/reboot
+ jnz entry_resume
+ ENTRY_INTO32 _cfunc32flat_handle_post // Normal entry point
ORG 0xe2c3
IRQ_ENTRY 02
ORG 0xfff0 // Power-up Entry Point
.global reset_vector
reset_vector:
- ljmpw $SEG_BIOS, $entry_post_official
+ ljmpw $SEG_BIOS, $entry_post
// 0xfff5 - BiosDate in misc.c