#include "biosvar.h" // struct bios_data_area_s
#include "bregs.h" // struct bregs
#include "acpi.h" // find_resume_vector
+#include "ps2port.h" // i8042_reboot
+#include "pci.h" // pci_reboot
+#include "cmos.h" // inb_cmos
+
+// Indicator if POST phase has been run.
+int HaveRunPost VAR16VISIBLE;
// Reset DMA controller
void
// Handler for post calls that look like a resume.
void VISIBLE16
-handle_resume(u8 status)
+handle_resume(void)
{
- init_dma();
-
debug_serial_setup();
+ int status = inb_cmos(CMOS_RESET_CODE);
+ outb_cmos(0, CMOS_RESET_CODE);
dprintf(1, "In resume (status=%d)\n", status);
+ init_dma();
+
switch (status) {
- case 0xfe:
- if (CONFIG_S3_RESUME) {
- // S3 resume request. Jump to 32bit mode to handle the resume.
- asm volatile(
- "movw %w1, %%ss\n"
- "movl %0, %%esp\n"
- "movl $s3_resume, %%edx\n"
- "jmp transition32\n"
- : : "i"(BUILD_S3RESUME_STACK_ADDR), "r"(0)
- );
- break;
- }
- // NO BREAK
- case 0x00:
- case 0x0d ... 0xfd:
- case 0xff:
- // Normal post - now that status has been cleared a reset will
- // run regular boot code..
- reset_vector();
- break;
+ case 0x01 ... 0x04:
+ case 0x06 ... 0x09:
+ panic("Unimplemented shutdown status: %02x\n", status);
case 0x05:
// flush keyboard (issue EOI) and jump via 40h:0067h
: : "m"(BDA_JUMP), "r"(SEG_BDA)
);
break;
+
+ default:
+ break;
}
- panic("Unimplemented shutdown status: %02x\n", status);
+ // Not a 16bit resume - do remaining checks in 32bit mode
+ asm volatile(
+ "movw %w1, %%ss\n"
+ "movl %0, %%esp\n"
+ "movl $_cfunc32flat_handle_resume32, %%edx\n"
+ "jmp transition32\n"
+ : : "i"(BUILD_S3RESUME_STACK_ADDR), "r"(0), "a"(status)
+ );
}
-void VISIBLE32FLAT
+// Handle an S3 resume event
+static void
s3_resume(void)
{
- ASSERT32FLAT();
if (!CONFIG_S3_RESUME)
- panic("S3 resume support not compiled in.\n");
+ return;
- dprintf(1, "In 32bit resume\n");
+ u32 s3_resume_vector = find_resume_vector();
+ if (!s3_resume_vector) {
+ dprintf(1, "No resume vector set!\n");
+ return;
+ }
smm_init();
make_bios_readonly();
- u32 s3_resume_vector = find_resume_vector();
-
// Invoke the resume vector.
struct bregs br;
memset(&br, 0, sizeof(br));
- if (s3_resume_vector) {
- dprintf(1, "Jump to resume vector (%x)\n", s3_resume_vector);
- br.code = FLATPTR_TO_SEGOFF((void*)s3_resume_vector);
- } else {
- dprintf(1, "No resume vector set!\n");
- // Jump to the post vector to restart with a normal boot.
- br.code = SEGOFF(SEG_BIOS, (u32)reset_vector - BUILD_BIOS_ADDR);
- }
+ dprintf(1, "Jump to resume vector (%x)\n", s3_resume_vector);
+ br.code = FLATPTR_TO_SEGOFF((void*)s3_resume_vector);
call16big(&br);
}
+
+// Attempt to invoke a hard-reboot.
+static void
+tryReboot(void)
+{
+ dprintf(1, "Attempting a hard reboot\n");
+
+ // Setup for reset on qemu.
+ if (! CONFIG_COREBOOT) {
+ qemu_prep_reset();
+ if (HaveRunPost)
+ apm_shutdown();
+ }
+
+ // Try keyboard controller reboot.
+ i8042_reboot();
+
+ // Try PCI 0xcf9 reboot
+ pci_reboot();
+
+ // Try triple fault
+ asm volatile("int3");
+
+ panic("Could not reboot");
+}
+
+void VISIBLE32FLAT
+handle_resume32(int status)
+{
+ ASSERT32FLAT();
+ dprintf(1, "In 32bit resume\n");
+
+ if (status == 0xfe)
+ s3_resume();
+
+ // Must be a soft reboot - invoke a hard reboot.
+ tryReboot();
+}