drop setup_ics code that was blatantly copied from cx700 and

[coreboot.git] / src / northbridge / via / vx800 / vx800_early_smbus.c

diff --git a/src/northbridge/via/vx800/vx800_early_smbus.c b/src/northbridge/via/vx800/vx800_early_smbus.c
index 53ede31cf8ebf595835a940e1f2f32a9329f036e..7ba9b41acb6b513664c5863172ee702a300f4be7 100644 (file)
--- a/src/northbridge/via/vx800/vx800_early_smbus.c
+++ b/src/northbridge/via/vx800/vx800_early_smbus.c
@@ -108,62 +108,6 @@ static void smbus_reset(void)
 }
 
 /* Public functions */
-static unsigned int set_ics_data(unsigned char dev, int data, char len)
-{
-       smbus_reset();
-       /* clear host data port */
-       outb(0x00, SMBHSTDAT0);
-       SMBUS_DELAY();
-       smbus_wait_until_ready();
-
-       /* read to reset block transfer counter */
-       inb(SMBHSTCTL);
-
-       /* fill blocktransfer array */
-       if (dev == 0xd2) {
-               //char d2_data[] = {0x0d,0x00,0x3f,0xcd,0x7f,0xbf,0x1a,0x2a,0x01,0x0f,0x0b,0x00,0x8d,0x9b};
-               outb(0x0d, SMBBLKDAT);
-               outb(0x00, SMBBLKDAT);
-               outb(0x3f, SMBBLKDAT);
-               outb(0xcd, SMBBLKDAT);
-               outb(0x7f, SMBBLKDAT);
-               outb(0xbf, SMBBLKDAT);
-               outb(0x1a, SMBBLKDAT);
-               outb(0x2a, SMBBLKDAT);
-               outb(0x01, SMBBLKDAT);
-               outb(0x0f, SMBBLKDAT);
-               outb(0x0b, SMBBLKDAT);
-               outb(0x80, SMBBLKDAT);
-               outb(0x8d, SMBBLKDAT);
-               outb(0x9b, SMBBLKDAT);
-       } else {
-               //char d4_data[] = {0x08,0xff,0x3f,0x00,0x00,0xff,0xff,0xff,0xff};
-               outb(0x08, SMBBLKDAT);
-               outb(0xff, SMBBLKDAT);
-               outb(0x3f, SMBBLKDAT);
-               outb(0x00, SMBBLKDAT);
-               outb(0x00, SMBBLKDAT);
-               outb(0xff, SMBBLKDAT);
-               outb(0xff, SMBBLKDAT);
-               outb(0xff, SMBBLKDAT);
-               outb(0xff, SMBBLKDAT);
-       }
-
-       //for (i=0; i < len; i++)
-       //      outb(data[i],SMBBLKDAT);
-
-       outb(dev, SMBXMITADD);
-       outb(0, SMBHSTCMD);
-       outb(len, SMBHSTDAT0);
-       outb(0x74, SMBHSTCTL);
-
-       SMBUS_DELAY();
-
-       smbus_wait_until_ready();
-
-       smbus_reset();
-       return 0;
-}
 
 static unsigned int get_spd_data(unsigned int dimm, unsigned int offset)
 {
@@ -219,13 +163,6 @@ static void enable_smbus(void)
        /* Make it work for I/O ... */
        pci_write_config16(dev, 0x04, 0x0003);
 
-       /*
-          coreboot hangs at this two lines after os reboot(this even happen after I change os 
-          reboot to cold reboot, this also interfere S3 wakeup) */
-       /* Setup clock chips */
-       //set_ics_data(0xd2, 0, 14);
-       //set_ics_data(0xd4, 0, 9);
-
        smbus_reset();
        /* clear host data port */
        outb(0x00, SMBHSTDAT0);