{
u32 reg32;
- printk_spew(" set_receive_enable() medium=0x%x, coarse=0x%x\n", medium, coarse);
+ printk(BIOS_SPEW, " set_receive_enable() medium=0x%x, coarse=0x%x\n", medium, coarse);
reg32 = MCHBAR32(C0DRT1 + channel_offset);
reg32 &= 0xf0ffffff;
/* This should never happen: */
if (coarse > 0x0f)
- printk_debug("set_receive_enable: coarse overflow: 0x%02x.\n", coarse);
+ printk(BIOS_DEBUG, "set_receive_enable: coarse overflow: 0x%02x.\n", coarse);
/* medium control
*
static int normalize(int channel_offset, u8 * mediumcoarse, u8 * fine)
{
- printk_spew(" normalize()\n");
+ printk(BIOS_SPEW, " normalize()\n");
if (*fine < 0x80)
return 0;
*mediumcoarse += 1;
if (*mediumcoarse >= 0x40) {
- printk_debug("Normalize Error\n");
+ printk(BIOS_DEBUG, "Normalize Error\n");
return -1;
}
/* find start of the data phase */
u32 reg32;
- printk_spew(" find_preamble()\n");
+ printk(BIOS_SPEW, " find_preamble()\n");
do {
if (*mediumcoarse < 4) {
- printk_debug("No Preamble found.\n");
+ printk(BIOS_DEBUG, "No Preamble found.\n");
return -1;
}
*mediumcoarse -= 4;
} while (reg32 & (1 << 19));
if (!(reg32 & (1 << 18))) {
- printk_debug("No Preamble found (neither high nor low).\n");
+ printk(BIOS_DEBUG, "No Preamble found (neither high nor low).\n");
return -1;
}
static int add_quarter_clock(int channel_offset, u8 * mediumcoarse, u8 * fine)
{
- printk_spew(" add_quarter_clock() mediumcoarse=%02x fine=%02x\n",
+ printk(BIOS_SPEW, " add_quarter_clock() mediumcoarse=%02x fine=%02x\n",
*mediumcoarse, *fine);
if (*fine >= 0x80) {
*fine -= 0x80;
*mediumcoarse += 2;
if (*mediumcoarse >= 0x40) {
- printk_debug("clocks at max.\n");
+ printk(BIOS_DEBUG, "clocks at max.\n");
return -1;
}
{
u32 rcvenmt;
- printk_spew(" find_strobes_low()\n");
+ printk(BIOS_SPEW, " find_strobes_low()\n");
for (;;) {
MCHBAR8(C0WL0REOST + channel_offset) = *fine;
}
- printk_debug("Could not find low strobe\n");
+ printk(BIOS_DEBUG, "Could not find low strobe\n");
return 0;
}
int counter;
u32 rcvenmt;
- printk_spew(" find_strobes_edge()\n");
+ printk(BIOS_SPEW, " find_strobes_edge()\n");
counter = 8;
set_receive_enable(channel_offset, *mediumcoarse & 3,
continue;
}
- printk_debug("Could not find rising edge.\n");
+ printk(BIOS_DEBUG, "Could not find rising edge.\n");
return -1;
}
u8 mediumcoarse;
u8 fine;
- printk_spew("receive_enable_autoconfig() for channel %d\n",
+ printk(BIOS_SPEW, "receive_enable_autoconfig() for channel %d\n",
channel_offset ? 1 : 0);
/* Set initial values */
* It can be removed when the output message is not printed anymore
*/
if (MCHBAR8(C0WL0REOST + channel_offset) == 0) {
- printk_debug("Weird. No C%sWL0REOST\n", channel_offset?"1":"0");
+ printk(BIOS_DEBUG, "Weird. No C%sWL0REOST\n", channel_offset?"1":"0");
}
return 0;