#include <cpu/amd/gx2def.h>
#include <cpu/x86/msr.h>
#include <cpu/x86/cache.h>
+#include <cpu/amd/vr.h>
+#include <cpu/cpu.h>
+#include "../../../southbridge/amd/cs5536/cs5536.h"
+#define VIDEO_MB 8
#define NORTHBRIDGE_FILE "northbridge.c"
-/* number of MB to take off the top of ram for VSM and display memory.
- * FIXME -- make this configurable
- */
-#define RAMADJUSTMB 9
-/*
-*/
-
-/* todo: add a resource record. We don't do this here because this may be called when
+/* todo: add a resource record. We don't do this here because this may be called when
* very little of the platform is actually working.
*/
int
unsigned short dimm;
msr = rdmsr(0x20000018);
- printk_debug("sizeram: %08x:%08x\n", msr.hi, msr.lo);
+ printk(BIOS_DEBUG, "sizeram: %08x:%08x\n", msr.hi, msr.lo);
/* dimm 0 */
dimm = msr.hi;
if ((dimm & 7) != 7)
sizem += (1 << ((dimm >> 12)-1)) * 8;
- printk_debug("sizeram: sizem 0x%x\n", sizem);
+ printk(BIOS_DEBUG, "sizeram: sizem 0x%x\n", sizem);
return sizem;
}
/* ram has none of this stuff */
#define RAM_PROPERTIES (0)
#define DEVICE_PROPERTIES (WRITE_SERIALIZE|CACHE_DISABLE)
-#define ROM_PROPERTIES (WRITE_SERIALIZE|WRITE_THROUGH|CACHE_DISABLE)
+#define ROM_PROPERTIES (WRITE_SERIALIZE|WRITE_PROTECT|CACHE_DISABLE)
#define MSR_WS_CD_DEFAULT (0x21212121)
/* 1810-1817 give you 8 registers with which to program protection regions */
/* GLIU0 */
P2D_BM(0x10000020, 0x1, 0x0, 0x0, 0xfff80),
P2D_BM(0x10000021, 0x1, 0x0, 0x80000, 0xfffe0),
- P2D_SC(0x1000002c, 0x1, 0x0, 0x0, 0xff03, 0x3),
+ P2D_SC(0x1000002c, 0x1, 0x0, 0x0, 0xff03, 0xC0000),
/* GLIU1 */
P2D_BM(0x40000020, 0x1, 0x0, 0x0, 0xfff80),
P2D_BM(0x40000021, 0x1, 0x0, 0x80000, 0xfffe0),
- P2D_SC(0x4000002d, 0x1, 0x0, 0x0, 0xff03, 0x3),
+ P2D_SC(0x4000002d, 0x1, 0x0, 0x0, 0xff03, 0xC0000),
{0}
};
+/* note that dev is NOT used -- yet */
+static void irq_init_steering(struct device *dev, u16 irq_map) {
+ /* Set up IRQ steering */
+ u32 pciAddr = 0x80000000 | (CHIPSET_DEV_NUM << 11) | 0x5C;
+
+ printk(BIOS_DEBUG, "%s(%p [%08X], %04X)\n", __func__, dev, pciAddr, irq_map);
+
+ /* The IRQ steering values (in hex) are effectively dcba, where:
+ * <a> represents the IRQ for INTA,
+ * <b> represents the IRQ for INTB,
+ * <c> represents the IRQ for INTC, and
+ * <d> represents the IRQ for INTD.
+ * Thus, a value of irq_map = 0xAA5B translates to:
+ * INTA = IRQB (IRQ 11)
+ * INTB = IRQ5 (IRQ 5)
+ * INTC = IRQA (IRQ 10)
+ * INTD = IRQA (IRQ 10)
+ */
+ outl(pciAddr & ~3, 0xCF8);
+ outl(irq_map, 0xCFC);
+}
+
+/*
+ * setup_gx2_cache
+ *
+ * Returns the amount of memory (in KB) available to the system. This is the
+ * total amount of memory less the amount of memory reserved for SMM use.
+ *
+ */
static int
setup_gx2_cache(void)
{
msr_t msr;
unsigned long long val;
- int sizembytes, sizereg;
+ int sizekbytes, sizereg;
- sizembytes = sizeram();
- printk_debug("enable_cache: enable for %dm bytes\n", sizembytes);
+ sizekbytes = sizeram() * 1024;
+ printk(BIOS_DEBUG, "setup_gx2_cache: enable for %d KB\n", sizekbytes);
/* build up the rconf word. */
/* the SYSTOP bits 27:8 are actually the top bits from 31:12. Book fails to say that */
/* set romrp */
val = ((unsigned long long) ROM_PROPERTIES) << 56;
/* make rom base useful for 1M roms */
- /* Flash base address -- sized for 1/2M for now*/
- val |= ((unsigned long long) 0xfff800)<<36;
+ /* Flash base address -- sized for 1M for now*/
+ val |= ((unsigned long long) 0xfff00)<<36;
/* set the devrp properties */
val |= ((unsigned long long) DEVICE_PROPERTIES) << 28;
- /* sigh. Take our TOM, RIGHT shift 12, since it page-aligned, then LEFT-shift 8 for reg. */
- /* yank off 8M for frame buffer and 1M for VSA */
- sizembytes -= RAMADJUSTMB;
- sizereg = sizembytes;
- sizereg *= 0x100000;
+ /* Take our TOM, RIGHT shift 12, since it page-aligned, then LEFT-shift 8 for reg. */
+ /* yank off memory for the SMM handler */
+ sizekbytes -= SMM_SIZE;
+ sizereg = sizekbytes;
+ sizereg *= 1024; // convert to bytes
sizereg >>= 12;
sizereg <<= 8;
val |= sizereg;
val |= RAM_PROPERTIES;
msr.lo = val;
msr.hi = (val >> 32);
- printk_debug("msr will be set to %x:%x\n", msr.hi, msr.lo);
+ printk(BIOS_DEBUG, "msr 0x%08X will be set to %08x:%08x\n", CPU_RCONF_DEFAULT, msr.hi, msr.lo);
wrmsr(CPU_RCONF_DEFAULT, msr);
enable_cache();
wbinvd();
- return sizembytes;
+ return sizekbytes;
}
-#define SMM_OFFSET 0x40400000
-#define SMM_SIZE 256
-
/* we have to do this here. We have not found a nicer way to do it */
-void
+static void
setup_gx2(void)
{
- int i;
- unsigned long tmp, tmp2, tmp3;
+
+ unsigned long tmp, tmp2;
msr_t msr;
- unsigned long sizem, membytes;
+ unsigned long size_kb, membytes;
- sizem = setup_gx2_cache();
+ size_kb = setup_gx2_cache();
+
+ membytes = size_kb * 1024;
+ /* NOTE! setup_gx2_cache returns the SIZE OF RAM - RAMADJUST!
+ * so it is safe to use. You should NOT at this point call
+ * sizeram() directly.
+ */
- membytes = sizem * 1048576;
-#if 0
/* we need to set 0x10000028 and 0x40000029 */
- printk_debug("sizem 0x%x, membytes 0x%x\n", sizem, membytes);
+ /*
+ * These two descriptors cover the range from 1 MB (0x100000) to
+ * SYSTOP (a.k.a. TOM, or Top of Memory)
+ */
+
+#if 0
+ /* This has already been done elsewhere */
+ printk(BIOS_DEBUG, "size_kb 0x%x, membytes 0x%x\n", size_kb, membytes);
msr.hi = 0x20000000 | membytes>>24;
msr.lo = 0x100 | ( ((membytes >>12) & 0xfff) << 20);
wrmsr(0x10000028, msr);
msr.hi = 0x20000000 | membytes>>24;
msr.lo = 0x100 | ( ((membytes >>12) & 0xfff) << 20);
wrmsr(0x40000029, msr);
+#endif
+#if 0
msr = rdmsr(0x10000028);
- printk_debug("MSR 0x%x is now 0x%x:0x%x\n", 0x10000028, msr.hi,msr.lo);
+ printk(BIOS_DEBUG, "MSR 0x%x is now 0x%x:0x%x\n", 0x10000028, msr.hi,msr.lo);
msr = rdmsr(0x40000029);
- printk_debug("MSR 0x%x is now 0x%x:0x%x\n", 0x40000029, msr.hi,msr.lo);
-
-
+ printk(BIOS_DEBUG, "MSR 0x%x is now 0x%x:0x%x\n", 0x40000029, msr.hi,msr.lo);
+#endif
+#if 1
/* fixme: SMM MSR 0x10000026 and 0x400000023 */
/* calculate the OFFSET field */
tmp = membytes - SMM_OFFSET;
/* calculate the PBASE and PMASK fields */
tmp2 = (SMM_OFFSET << 8) & 0xFFF00000; /* shift right 12 then left 20 == left 8 */
tmp2 |= (((~(SMM_SIZE * 1024) + 1) >> 12) & 0xfffff);
- printk_debug("MSR 0x%x is now 0x%x:0x%x\n", 0x10000026, tmp, tmp2);
+ printk(BIOS_DEBUG, "MSR 0x%x is now 0x%lx:0x%lx\n", 0x10000026, tmp, tmp2);
msr.hi = tmp;
msr.lo = tmp2;
wrmsr(0x10000026, msr);
-#else
- msr.hi = 0x2000000f;
- msr.lo = 0xfbf00100;
- wrmsr(0x10000028, msr);
- msr = rdmsr(0x10000028);
- printk_debug("MSR 0x%x is now 0x%x:0x%x\n", 0x10000028, msr.hi, msr.lo);
- wrmsr(0x40000029, msr);
- msr = rdmsr(0x40000029);
- printk_debug("MSR 0x%x is now 0x%x:0x%x\n", 0x40000029, msr.hi, msr.lo);
+#endif
+#if 0
msr.hi = 0x2cfbc040;
msr.lo = 0x400fffc0;
wrmsr(0x10000026, msr);
msr = rdmsr(0x10000026);
- printk_debug("MSR 0x%x is now 0x%x:0x%x\n", 0x10000026, msr.hi, msr.lo);
-
+ printk(BIOS_DEBUG, "MSR 0x%x is now 0x%x:0x%x\n", 0x10000026, msr.hi, msr.lo);
+#endif
+#if 0
msr.hi = 0x22fffc02;
msr.lo = 0x10ffbf00;
wrmsr(0x1808, msr);
msr = rdmsr(0x1808);
- printk_debug("MSR 0x%x is now 0x%x:0x%x\n", 0x1808, msr.hi, msr.lo);
+ printk(BIOS_DEBUG, "MSR 0x%x is now 0x%x:0x%x\n", 0x1808, msr.hi, msr.lo);
#endif
+#if 0 // SDG - don't do this
/* now do the default MSR values */
for(i = 0; msr_defaults[i].msr_no; i++) {
msr_t msr;
- wrmsr(msr_defaults[i].msr_no, msr_defaults[i].msr);
+ wrmsr(msr_defaults[i].msr_no, msr_defaults[i].msr); // MSR - see table above
msr = rdmsr(msr_defaults[i].msr_no);
- printk_debug("MSR 0x%x is now 0x%x:0x%x\n", msr_defaults[i].msr_no, msr.hi,msr.lo);
+ printk(BIOS_DEBUG, "MSR 0x%08X is now 0x%08X:0x%08X\n", msr_defaults[i].msr_no, msr.hi,msr.lo);
}
+#endif
}
static void enable_shadow(device_t dev)
{
-
+
}
-static void northbridge_init(device_t dev)
+static void northbridge_init(device_t dev)
{
- printk_debug("northbridge: %s()\n", __FUNCTION__);
-
+ unsigned long m;
+
+ struct northbridge_amd_gx2_config *nb = (struct northbridge_amd_gx2_config *)dev->chip_info;
+ printk(BIOS_DEBUG, "northbridge: %s()\n", __func__);
+
enable_shadow(dev);
+ irq_init_steering(dev, nb->irqmap);
+
+ /* HACK HACK HACK HACK */
+ /* 0x1000 is where GPIO is being assigned */
+ m = inl(0x1038);
+ m &= ~GPIOL_12_SET;
+ m |= GPIOL_12_CLEAR;
+ outl(m, 0x1038);
}
+/* due to vsa interactions, we need not not touch the nb settings ... */
+/* this is a test -- we are not sure it will work -- but it ought to */
+static void set_resources(struct device *dev)
+{
+#if 0
+ struct resource *res;
+
+ for(res = &dev->resource_list; res; res = res->next) {
+ pci_set_resource(dev, resource);
+ }
+#endif
+ struct bus *bus;
+
+ for(bus = dev->link_list; bus; bus = bus->next) {
+ if (bus->children) {
+ assign_resources(bus);
+ }
+ }
+
+#if 0
+ /* set a default latency timer */
+ pci_write_config8(dev, PCI_LATENCY_TIMER, 0x40);
+
+ /* set a default secondary latency timer */
+ if ((dev->hdr_type & 0x7f) == PCI_HEADER_TYPE_BRIDGE) {
+ pci_write_config8(dev, PCI_SEC_LATENCY_TIMER, 0x40);
+ }
+
+ /* zero the irq settings */
+ u8 line = pci_read_config8(dev, PCI_INTERRUPT_PIN);
+ if (line) {
+ pci_write_config8(dev, PCI_INTERRUPT_LINE, 0);
+ }
+ /* set the cache line size, so far 64 bytes is good for everyone */
+ pci_write_config8(dev, PCI_CACHE_LINE_SIZE, 64 >> 2);
+#endif
+}
+
+
+
static struct device_operations northbridge_operations = {
.read_resources = pci_dev_read_resources,
+#if 0
.set_resources = pci_dev_set_resources,
+#endif
+ .set_resources = set_resources,
.enable_resources = pci_dev_enable_resources,
.init = northbridge_init,
.enable = 0,
.ops_pci = 0,
};
-static struct pci_driver northbridge_driver __pci_driver = {
+static const struct pci_driver northbridge_driver __pci_driver = {
.ops = &northbridge_operations,
.vendor = PCI_VENDOR_ID_NS,
.device = PCI_DEVICE_ID_NS_GX2,
};
-#define BRIDGE_IO_MASK (IORESOURCE_IO | IORESOURCE_MEM)
-
-static void pci_domain_read_resources(device_t dev)
-{
- struct resource *resource;
-
- printk_spew("%s:%s()\n", NORTHBRIDGE_FILE, __FUNCTION__);
-
- /* Initialize the system wide io space constraints */
- resource = new_resource(dev, IOINDEX_SUBTRACTIVE(0,0));
- resource->limit = 0xffffUL;
- resource->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
-
- /* Initialize the system wide memory resources constraints */
- resource = new_resource(dev, IOINDEX_SUBTRACTIVE(1,0));
- resource->limit = 0xffffffffULL;
- resource->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
-}
-
-static void ram_resource(device_t dev, unsigned long index,
- unsigned long basek, unsigned long sizek)
-{
- struct resource *resource;
-
- if (!sizek) {
- return;
- }
- resource = new_resource(dev, index);
- resource->base = ((resource_t)basek) << 10;
- resource->size = ((resource_t)sizek) << 10;
- resource->flags = IORESOURCE_MEM | IORESOURCE_CACHEABLE | \
- IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED;
-}
-
-static void tolm_test(void *gp, struct device *dev, struct resource *new)
-{
- struct resource **best_p = gp;
- struct resource *best;
- best = *best_p;
- if (!best || (best->base > new->base)) {
- best = new;
- }
- *best_p = best;
-}
-
-static uint32_t find_pci_tolm(struct bus *bus)
-{
- struct resource *min;
- uint32_t tolm;
- min = 0;
- search_bus_resources(bus, IORESOURCE_MEM, IORESOURCE_MEM, tolm_test, &min);
- tolm = 0xffffffffUL;
- if (min && tolm > min->base) {
- tolm = min->base;
- }
- return tolm;
-}
-
+// FIXME handle UMA correctly.
#define FRAMEBUFFERK 4096
static void pci_domain_set_resources(device_t dev)
{
- device_t mc_dev;
- uint32_t pci_tolm;
#if 0
- pci_tolm = find_pci_tolm(&dev->link[0]);
- mc_dev = dev->link[0].children;
+ device_t mc_dev;
+ u32 pci_tolm;
+
+ pci_tolm = find_pci_tolm(dev->link_list);
+ mc_dev = dev->link_list->children;
if (mc_dev) {
unsigned int tomk, tolmk;
unsigned int ramreg = 0;
continue;
ramreg += 1 << (((mem_config & (DIMM_SZ << i)) >> (i + 8)) + 2);
}
-
+
tomk = ramreg << 10;
/* Sort out the framebuffer size */
*bcdramtop = ((tomk << 10) - 1);
*mcgbaseadd = (tomk >> 9);
- printk_debug("BC_DRAM_TOP = 0x%08x\n", *bcdramtop);
- printk_debug("MC_GBASE_ADD = 0x%08x\n", *mcgbaseadd);
+ printk(BIOS_DEBUG, "BC_DRAM_TOP = 0x%08x\n", *bcdramtop);
+ printk(BIOS_DEBUG, "MC_GBASE_ADD = 0x%08x\n", *mcgbaseadd);
- printk_debug("I would set ram size to %d Mbytes\n", (tomk >> 10));
+ printk(BIOS_DEBUG, "I would set ram size to %d Mbytes\n", (tomk >> 10));
/* Compute the top of Low memory */
tolmk = pci_tolm >> 10;
idx = 10;
ram_resource(dev, idx++, 0, tolmk);
}
- assign_resources(&dev->link[0]);
#endif
-}
-
-static unsigned int pci_domain_scan_bus(device_t dev, unsigned int max)
-{
- max = pci_scan_bus(&dev->link[0], PCI_DEVFN(0, 0), 0xff, max);
- return max;
+ assign_resources(dev->link_list);
}
static struct device_operations pci_domain_ops = {
.read_resources = pci_domain_read_resources,
.set_resources = pci_domain_set_resources,
- .enable_resources = enable_childrens_resources,
- .init = 0,
+ .enable_resources = NULL,
+ .init = NULL,
.scan_bus = pci_domain_scan_bus,
-};
+};
static void cpu_bus_init(device_t dev)
{
- initialize_cpus(&dev->link[0]);
+ initialize_cpus(dev->link_list);
}
static void cpu_bus_noop(device_t dev)
void chipsetInit (void);
+#if CONFIG_WRITE_HIGH_TABLES==1
+#define HIGH_TABLES_SIZE 64 // maximum size of high tables in KB
+extern uint64_t high_tables_base, high_tables_size;
+#endif
+
static void enable_dev(struct device *dev)
{
- printk_debug("gx2 north: enable_dev\n");
+ printk(BIOS_DEBUG, "gx2 north: enable_dev\n");
+ void do_vsmbios(void);
+
/* Set the operations if it is a special bus type */
if (dev->path.type == DEVICE_PATH_PCI_DOMAIN) {
- extern void cpubug(void);
- printk_debug("DEVICE_PATH_PCI_DOMAIN\n");
+ u32 tomk;
+ printk(BIOS_DEBUG, "DEVICE_PATH_PCI_DOMAIN\n");
/* cpubug MUST be called before setup_gx2(), so we force the issue here */
northbridgeinit();
- cpubug();
+ cpubug();
chipsetinit();
setup_gx2();
- /* do this here for now -- this chip really breaks our device model */
- setup_realmode_idt();
do_vsmbios();
+ graphics_init();
dev->ops = &pci_domain_ops;
pci_set_method(dev);
- ram_resource(dev, 0, 0, (sizeram() - RAMADJUSTMB)*1024);
+ tomk = ((sizeram() - VIDEO_MB) * 1024) - SMM_SIZE;
+#if CONFIG_WRITE_HIGH_TABLES==1
+ /* Leave some space for ACPI, PIRQ and MP tables */
+ high_tables_base = (tomk - HIGH_TABLES_SIZE) * 1024;
+ high_tables_size = HIGH_TABLES_SIZE * 1024;
+#endif
+ ram_resource(dev, 0, 0, tomk);
} else if (dev->path.type == DEVICE_PATH_APIC_CLUSTER) {
- printk_debug("DEVICE_PATH_APIC_CLUSTER\n");
+ printk(BIOS_DEBUG, "DEVICE_PATH_APIC_CLUSTER\n");
dev->ops = &cpu_bus_ops;
}
+ printk(BIOS_DEBUG, "gx2 north: end enable_dev\n");
}
struct chip_operations northbridge_amd_gx2_ops = {
- CHIP_NAME("AMD GX2 Northbridge")
- .enable_dev = enable_dev,
+ CHIP_NAME("AMD GX (previously GX2) Northbridge")
+ .enable_dev = enable_dev,
};
projects / coreboot.git / blobdiff