#include <cpu/x86/lapic.h>
+#include <cpu/amd/multicore.h>
#if CONFIG_LOGICAL_CPUS==1
-#include <cpu/amd/dualcore.h>
#include <pc80/mc146818rtc.h>
#endif
#include "amdk8.h"
-#if K8_HW_MEM_HOLE_SIZEK != 0
#include <cpu/amd/model_fxx_rev.h>
-#endif
-#define FX_DEVS 8
-static device_t __f0_dev[FX_DEVS];
-static device_t __f1_dev[FX_DEVS];
+#include <cpu/amd/amdk8_sysconf.h>
-#if 0
-static void debug_fx_devs(void)
-{
- int i;
- for(i = 0; i < FX_DEVS; i++) {
- device_t dev;
- dev = __f0_dev[i];
- if (dev) {
- printk_debug("__f0_dev[%d]: %s bus: %p\n",
- i, dev_path(dev), dev->bus);
- }
- dev = __f1_dev[i];
- if (dev) {
- printk_debug("__f1_dev[%d]: %s bus: %p\n",
- i, dev_path(dev), dev->bus);
- }
- }
-}
-#endif
+struct amdk8_sysconf_t sysconf;
+
+#define MAX_FX_DEVS 8
+static device_t __f0_dev[MAX_FX_DEVS];
+static device_t __f1_dev[MAX_FX_DEVS];
+static unsigned fx_devs=0;
static void get_fx_devs(void)
{
int i;
- if (__f1_dev[0]) {
- return;
- }
- for(i = 0; i < FX_DEVS; i++) {
+ for(i = 0; i < MAX_FX_DEVS; i++) {
__f0_dev[i] = dev_find_slot(0, PCI_DEVFN(0x18 + i, 0));
__f1_dev[i] = dev_find_slot(0, PCI_DEVFN(0x18 + i, 1));
+ if (__f0_dev[i] != NULL && __f1_dev[i] != NULL)
+ fx_devs = i+1;
}
- if (!__f1_dev[0]) {
- die("Cannot find 0:0x18.1\n");
+ if (__f1_dev[0] == NULL || __f0_dev[0] == NULL || fx_devs == 0) {
+ die("Cannot find 0:0x18.[0|1]\n");
}
}
-static uint32_t f1_read_config32(unsigned reg)
+static u32 f1_read_config32(unsigned reg)
{
- get_fx_devs();
+ if (fx_devs == 0)
+ get_fx_devs();
return pci_read_config32(__f1_dev[0], reg);
}
-static void f1_write_config32(unsigned reg, uint32_t value)
+static void f1_write_config32(unsigned reg, u32 value)
{
int i;
- get_fx_devs();
- for(i = 0; i < FX_DEVS; i++) {
+ if (fx_devs == 0)
+ get_fx_devs();
+ for(i = 0; i < fx_devs; i++) {
device_t dev;
dev = __f1_dev[i];
if (dev && dev->enabled) {
}
}
-static unsigned int amdk8_nodeid(device_t dev)
+static u32 amdk8_nodeid(device_t dev)
{
- return (dev->path.u.pci.devfn >> 3) - 0x18;
+ return (dev->path.pci.devfn >> 3) - 0x18;
}
-unsigned hcdn_reg[4]; // it will be used by get_sblk_pci1234
-
-static unsigned int amdk8_scan_chain(device_t dev, unsigned nodeid, unsigned link, unsigned sblink, unsigned int max, unsigned offset_unitid)
+static u32 amdk8_scan_chain(device_t dev, u32 nodeid, struct bus *link, u32 link_num, u32 sblink,
+ u32 max, u32 offset_unitid)
{
-#if 0
- printk_debug("%s amdk8_scan_chains max: %d starting...\n",
- dev_path(dev), max);
-#endif
-// I want to put sb chain in bus 0 can I?
-
- uint32_t link_type;
+ u32 link_type;
int i;
- uint32_t busses, config_busses;
- unsigned free_reg, config_reg;
- unsigned ht_unitid_base[4]; // here assume only 4 HT device on chain
- unsigned max_bus;
- unsigned min_bus;
-
- dev->link[link].cap = 0x80 + (link *0x20);
+ u32 busses, config_busses;
+ u32 free_reg, config_reg;
+ u32 ht_unitid_base[4]; // here assume only 4 HT device on chain
+ u32 max_bus;
+ u32 min_bus;
+ u32 max_devfn;
+
+ link->cap = 0x80 + (link_num *0x20);
do {
- link_type = pci_read_config32(dev, dev->link[link].cap + 0x18);
+ link_type = pci_read_config32(dev, link->cap + 0x18);
} while(link_type & ConnectionPending);
if (!(link_type & LinkConnected)) {
return max;
}
do {
- link_type = pci_read_config32(dev, dev->link[link].cap + 0x18);
+ link_type = pci_read_config32(dev, link->cap + 0x18);
} while(!(link_type & InitComplete));
if (!(link_type & NonCoherent)) {
return max;
}
/* See if there is an available configuration space mapping
- * register in function 1.
+ * register in function 1.
*/
free_reg = 0;
for(config_reg = 0xe0; config_reg <= 0xec; config_reg += 4) {
- uint32_t config;
+ u32 config;
config = f1_read_config32(config_reg);
if (!free_reg && ((config & 3) == 0)) {
free_reg = config_reg;
continue;
}
- if (((config & 3) == 3) &&
+ if (((config & 3) == 3) &&
(((config >> 4) & 7) == nodeid) &&
- (((config >> 8) & 3) == link)) {
+ (((config >> 8) & 3) == link_num)) {
break;
}
}
config_reg = free_reg;
}
/* If we can't find an available configuration space mapping
- * register skip this bus
+ * register skip this bus
*/
if (config_reg > 0xec) {
return max;
* We have no idea how many busses are behind this bridge yet,
* so we set the subordinate bus number to 0xff for the moment.
*/
-#if K8_SB_HT_CHAIN_ON_BUS0 > 0
- // first chain will on bus 0
- if((nodeid == 0) && (sblink==link)) { // actually max is 0 here
- min_bus = max;
- }
- #if K8_SB_HT_CHAIN_ON_BUS0 > 1
+#if CONFIG_SB_HT_CHAIN_ON_BUS0 > 0
+ // first chain will on bus 0
+ if((nodeid == 0) && (sblink==link_num)) { // actually max is 0 here
+ min_bus = max;
+ }
+ #if CONFIG_SB_HT_CHAIN_ON_BUS0 > 1
// second chain will be on 0x40, third 0x80, forth 0xc0
- else {
- min_bus = ((max>>6) + 1) * 0x40;
- }
+ else {
+ min_bus = ((max>>6) + 1) * 0x40;
+ }
max = min_bus;
- #else
- //other ...
- else {
- min_bus = ++max;
- }
- #endif
+ #else
+ //other ...
+ else {
+ min_bus = ++max;
+ }
+ #endif
#else
- min_bus = ++max;
+ min_bus = ++max;
#endif
- max_bus = 0xff;
+ max_bus = 0xff;
- dev->link[link].secondary = min_bus;
- dev->link[link].subordinate = max_bus;
+ link->secondary = min_bus;
+ link->subordinate = max_bus;
/* Read the existing primary/secondary/subordinate bus
* number configuration.
*/
- busses = pci_read_config32(dev, dev->link[link].cap + 0x14);
+ busses = pci_read_config32(dev, link->cap + 0x14);
config_busses = f1_read_config32(config_reg);
-
+
/* Configure the bus numbers for this bridge: the configuration
* transactions will not be propagates by the bridge if it is
* not correctly configured
*/
busses &= 0xff000000;
busses |= (((unsigned int)(dev->bus->secondary) << 0) |
- ((unsigned int)(dev->link[link].secondary) << 8) |
- ((unsigned int)(dev->link[link].subordinate) << 16));
- pci_write_config32(dev, dev->link[link].cap + 0x14, busses);
+ ((unsigned int)(link->secondary) << 8) |
+ ((unsigned int)(link->subordinate) << 16));
+ pci_write_config32(dev, link->cap + 0x14, busses);
config_busses &= 0x000fc88;
- config_busses |=
+ config_busses |=
(3 << 0) | /* rw enable, no device compare */
- (( nodeid & 7) << 4) |
- (( link & 3 ) << 8) |
- ((dev->link[link].secondary) << 16) |
- ((dev->link[link].subordinate) << 24);
+ (( nodeid & 7) << 4) |
+ (( link_num & 3 ) << 8) |
+ ((link->secondary) << 16) |
+ ((link->subordinate) << 24);
f1_write_config32(config_reg, config_busses);
-#if 0
- printk_debug("%s Hyper transport scan link: %d max: %d\n",
- dev_path(dev), link, max);
-#endif
/* Now we can scan all of the subordinate busses i.e. the
- * chain on the hypertranport link
+ * chain on the hypertranport link
*/
for(i=0;i<4;i++) {
ht_unitid_base[i] = 0x20;
}
- max = hypertransport_scan_chain(&dev->link[link], 0, 0xbf, max, ht_unitid_base, offset_unitid);
-#if 0
- printk_debug("%s Hyper transport scan link: %d new max: %d\n",
- dev_path(dev), link, max);
-#endif
+ if (min_bus == 0)
+ max_devfn = (0x17<<3) | 7;
+ else
+ max_devfn = (0x1f<<3) | 7;
+
+ max = hypertransport_scan_chain(link, 0, max_devfn, max, ht_unitid_base, offset_unitid);
/* We know the number of busses behind this bridge. Set the
* subordinate bus number to it's real value
*/
- dev->link[link].subordinate = max;
+ link->subordinate = max;
busses = (busses & 0xff00ffff) |
- ((unsigned int) (dev->link[link].subordinate) << 16);
- pci_write_config32(dev, dev->link[link].cap + 0x14, busses);
+ ((unsigned int) (link->subordinate) << 16);
+ pci_write_config32(dev, link->cap + 0x14, busses);
config_busses = (config_busses & 0x00ffffff) |
- (dev->link[link].subordinate << 24);
+ (link->subordinate << 24);
f1_write_config32(config_reg, config_busses);
{
- // config config_reg, and ht_unitid_base to update hcdn_reg;
+ // use config_reg and ht_unitid_base to update hcdn_reg
int index;
- unsigned temp = 0;
+ u32 temp = 0;
index = (config_reg-0xe0) >> 2;
for(i=0;i<4;i++) {
temp |= (ht_unitid_base[i] & 0xff) << (i*8);
}
- hcdn_reg[index] = temp;
+ sysconf.hcdn_reg[index] = temp;
}
-
-#if 0
- printk_debug("%s Hypertransport scan link: %d done\n",
- dev_path(dev), link);
-#endif
-
return max;
}
-static unsigned int amdk8_scan_chains(device_t dev, unsigned int max)
+static unsigned amdk8_scan_chains(device_t dev, unsigned max)
{
- unsigned nodeid;
- unsigned link;
- unsigned sblink = 0;
+ unsigned nodeid;
+ struct bus *link;
+ unsigned sblink = 0;
unsigned offset_unitid = 0;
- nodeid = amdk8_nodeid(dev);
-
-#if 0
- printk_debug("%s amdk8_scan_chains max: %d starting...\n",
- dev_path(dev), max);
-#endif
-// I want to put sb chain in bus 0
-
- if(nodeid==0) {
- sblink = (pci_read_config32(dev, 0x64)>>8) & 3;
-#if K8_SB_HT_CHAIN_ON_BUS0 > 0
- #if HT_CHAIN_UNITID_BASE != 1
- offset_unitid = 1;
- #endif
- max = amdk8_scan_chain(dev, nodeid, sblink, sblink, max, offset_unitid ); // do sb ht chain at first, in case s2885 put sb chain (8131/8111) on link2, but put 8151 on link0
+ nodeid = amdk8_nodeid(dev);
+
+ if(nodeid==0) {
+ sblink = (pci_read_config32(dev, 0x64)>>8) & 3;
+#if CONFIG_SB_HT_CHAIN_ON_BUS0 > 0
+ #if ((CONFIG_HT_CHAIN_UNITID_BASE != 1) || (CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20))
+ offset_unitid = 1;
+ #endif
+ for (link = dev->link_list; link; link = link->next)
+ if (link->link_num == sblink)
+ max = amdk8_scan_chain(dev, nodeid, link, sblink, sblink, max, offset_unitid ); // do sb ht chain at first, in case s2885 put sb chain (8131/8111) on link2, but put 8151 on link0
#endif
- }
+ }
- for(link = 0; link < dev->links; link++) {
-#if K8_SB_HT_CHAIN_ON_BUS0 > 0
- if( (nodeid == 0) && (sblink == link) ) continue; //already done
+ for (link = dev->link_list; link; link = link->next) {
+#if CONFIG_SB_HT_CHAIN_ON_BUS0 > 0
+ if( (nodeid == 0) && (sblink == link->link_num) ) continue; //already done
#endif
offset_unitid = 0;
- #if HT_CHAIN_UNITID_BASE != 1
- #if SB_HT_CHAIN_UNITID_OFFSET_ONLY == 1
- if((nodeid == 0) && (sblink == link))
+ #if ((CONFIG_HT_CHAIN_UNITID_BASE != 1) || (CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20))
+ #if CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY == 1
+ if((nodeid == 0) && (sblink == link->link_num))
#endif
offset_unitid = 1;
#endif
- max = amdk8_scan_chain(dev, nodeid, link, sblink, max, offset_unitid);
- }
-#if 0
- printk_debug("%s amdk8_scan_chains max: %d done\n",
- dev_path(dev), max);
-#endif
- return max;
+ max = amdk8_scan_chain(dev, nodeid, link, link->link_num, sblink, max, offset_unitid);
+ }
+ return max;
}
-static int reg_useable(unsigned reg,
- device_t goal_dev, unsigned goal_nodeid, unsigned goal_link)
+static int reg_useable(unsigned reg, device_t goal_dev, unsigned goal_nodeid,
+ unsigned goal_link)
{
struct resource *res;
- unsigned nodeid, link;
+ unsigned nodeid, link = 0;
int result;
res = 0;
- for(nodeid = 0; !res && (nodeid < 8); nodeid++) {
+ for(nodeid = 0; !res && (nodeid < fx_devs); nodeid++) {
device_t dev;
dev = __f0_dev[nodeid];
+ if (!dev)
+ continue;
for(link = 0; !res && (link < 3); link++) {
- res = probe_resource(dev, 0x100 + (reg | link));
+ res = probe_resource(dev, IOINDEX(0x100 + reg, link));
}
}
result = 2;
if (res) {
result = 0;
- if ( (goal_link == (link - 1)) &&
+ if ( (goal_link == (link - 1)) &&
(goal_nodeid == (nodeid - 1)) &&
(res->flags <= 1)) {
result = 1;
}
}
-#if 0
- printk_debug("reg: %02x result: %d gnodeid: %u glink: %u nodeid: %u link: %u\n",
- reg, result,
- goal_nodeid, goal_link,
- nodeid, link);
-#endif
return result;
}
-static struct resource *amdk8_find_iopair(device_t dev, unsigned nodeid, unsigned link)
+static unsigned amdk8_find_reg(device_t dev, unsigned nodeid, unsigned link,
+ unsigned min, unsigned max)
{
- struct resource *resource;
+ unsigned resource;
unsigned free_reg, reg;
resource = 0;
free_reg = 0;
- for(reg = 0xc0; reg <= 0xd8; reg += 0x8) {
+ for(reg = min; reg <= max; reg += 0x8) {
int result;
result = reg_useable(reg, dev, nodeid, link);
if (result == 1) {
free_reg = reg;
}
}
- if (reg > 0xd8) {
+ if (reg > max) {
reg = free_reg;
}
if (reg > 0) {
- resource = new_resource(dev, 0x100 + (reg | link));
+ resource = IOINDEX(0x100 + reg, link);
}
return resource;
}
-static struct resource *amdk8_find_mempair(device_t dev, unsigned nodeid, unsigned link)
+static unsigned amdk8_find_iopair(device_t dev, unsigned nodeid, unsigned link)
{
- struct resource *resource;
- unsigned free_reg, reg;
- resource = 0;
- free_reg = 0;
- for(reg = 0x80; reg <= 0xb8; reg += 0x8) {
- int result;
- result = reg_useable(reg, dev, nodeid, link);
- if (result == 1) {
- /* I have been allocated this one */
- break;
- }
- else if (result > 1) {
- /* I have a free register pair */
- free_reg = reg;
- }
- }
- if (reg > 0xb8) {
- reg = free_reg;
- }
- if (reg > 0) {
- resource = new_resource(dev, 0x100 + (reg | link));
- }
- return resource;
+ return amdk8_find_reg(dev, nodeid, link, 0xc0, 0xd8);
+}
+
+static unsigned amdk8_find_mempair(device_t dev, unsigned nodeid, unsigned link)
+{
+ return amdk8_find_reg(dev, nodeid, link, 0x80, 0xb8);
}
static void amdk8_link_read_bases(device_t dev, unsigned nodeid, unsigned link)
{
struct resource *resource;
-
+
/* Initialize the io space constraints on the current bus */
- resource = amdk8_find_iopair(dev, nodeid, link);
+ resource = new_resource(dev, IOINDEX(0, link));
if (resource) {
resource->base = 0;
resource->size = 0;
resource->align = log2(HT_IO_HOST_ALIGN);
resource->gran = log2(HT_IO_HOST_ALIGN);
resource->limit = 0xffffUL;
- resource->flags = IORESOURCE_IO;
- compute_allocate_resource(&dev->link[link], resource,
- IORESOURCE_IO, IORESOURCE_IO);
+ resource->flags = IORESOURCE_IO | IORESOURCE_BRIDGE;
}
/* Initialize the prefetchable memory constraints on the current bus */
- resource = amdk8_find_mempair(dev, nodeid, link);
+ resource = new_resource(dev, IOINDEX(2, link));
if (resource) {
- resource->base = 0;
- resource->size = 0;
+ resource->base = 0;
+ resource->size = 0;
resource->align = log2(HT_MEM_HOST_ALIGN);
- resource->gran = log2(HT_MEM_HOST_ALIGN);
+ resource->gran = log2(HT_MEM_HOST_ALIGN);
resource->limit = 0xffffffffffULL;
resource->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
- compute_allocate_resource(&dev->link[link], resource,
- IORESOURCE_MEM | IORESOURCE_PREFETCH,
- IORESOURCE_MEM | IORESOURCE_PREFETCH);
+ resource->flags |= IORESOURCE_BRIDGE;
}
/* Initialize the memory constraints on the current bus */
- resource = amdk8_find_mempair(dev, nodeid, link);
+ resource = new_resource(dev, IOINDEX(1, link));
if (resource) {
- resource->base = 0;
- resource->size = 0;
+ resource->base = 0;
+ resource->size = 0;
resource->align = log2(HT_MEM_HOST_ALIGN);
- resource->gran = log2(HT_MEM_HOST_ALIGN);
- resource->limit = 0xffffffffffULL;
- resource->flags = IORESOURCE_MEM;
- compute_allocate_resource(&dev->link[link], resource,
- IORESOURCE_MEM | IORESOURCE_PREFETCH,
- IORESOURCE_MEM);
+ resource->gran = log2(HT_MEM_HOST_ALIGN);
+ resource->limit = 0xffffffffULL;
+ resource->flags = IORESOURCE_MEM | IORESOURCE_BRIDGE;
}
}
+static void amdk8_create_vga_resource(device_t dev, unsigned nodeid);
+
static void amdk8_read_resources(device_t dev)
{
- unsigned nodeid, link;
+ unsigned nodeid;
+ struct bus *link;
nodeid = amdk8_nodeid(dev);
- for(link = 0; link < dev->links; link++) {
- if (dev->link[link].children) {
- amdk8_link_read_bases(dev, nodeid, link);
+ for(link = dev->link_list; link; link = link->next) {
+ if (link->children) {
+ amdk8_link_read_bases(dev, nodeid, link->link_num);
}
}
+ amdk8_create_vga_resource(dev, nodeid);
}
static void amdk8_set_resource(device_t dev, struct resource *resource, unsigned nodeid)
{
+ struct bus *link;
resource_t rbase, rend;
- unsigned reg, link;
+ unsigned reg, link_num;
char buf[50];
/* Make certain the resource has actually been set */
if (!(resource->flags & IORESOURCE_ASSIGNED)) {
+ printk(BIOS_ERR, "%s: can't set unassigned resource @%lx %lx\n",
+ __func__, resource->index, resource->flags);
return;
}
/* If I have already stored this resource don't worry about it */
if (resource->flags & IORESOURCE_STORED) {
+ printk(BIOS_ERR, "%s: can't set stored resource @%lx %lx\n", __func__,
+ resource->index, resource->flags);
return;
}
-
+
/* Only handle PCI memory and IO resources */
if (!(resource->flags & (IORESOURCE_MEM | IORESOURCE_IO)))
return;
if (resource->index < 0x100) {
return;
}
+
+ if (resource->size == 0)
+ return;
+
/* Get the base address */
rbase = resource->base;
-
+
/* Get the limit (rounded up) */
rend = resource_end(resource);
/* Get the register and link */
reg = resource->index & 0xfc;
- link = resource->index & 3;
+ link_num = IOINDEX_LINK(resource->index);
+
+ for (link = dev->link_list; link; link = link->next)
+ if (link->link_num == link_num)
+ break;
+
+ if (link == NULL) {
+ printk(BIOS_ERR, "%s: can't find link %x for %lx\n", __func__,
+ link_num, resource->index);
+ return;
+ }
if (resource->flags & IORESOURCE_IO) {
- uint32_t base, limit;
- compute_allocate_resource(&dev->link[link], resource,
- IORESOURCE_IO, IORESOURCE_IO);
+ u32 base, limit;
base = f1_read_config32(reg);
limit = f1_read_config32(reg + 0x4);
base &= 0xfe000fcc;
base |= 3;
limit &= 0xfe000fc8;
limit |= rend & 0x01fff000;
- limit |= (link & 3) << 4;
+ limit |= (link_num & 3) << 4;
limit |= (nodeid & 7);
- if (dev->link[link].bridge_ctrl & PCI_BRIDGE_CTL_VGA) {
- printk_spew("%s, enabling legacy VGA IO forwarding for %s link %s\n",
- __func__, dev_path(dev), link);
+ if (link->bridge_ctrl & PCI_BRIDGE_CTL_VGA) {
+ printk(BIOS_SPEW, "%s, enabling legacy VGA IO forwarding for %s link 0x%x\n",
+ __func__, dev_path(dev), link_num);
base |= PCI_IO_BASE_VGA_EN;
}
- if (dev->link[link].bridge_ctrl & PCI_BRIDGE_CTL_NO_ISA) {
+ if (link->bridge_ctrl & PCI_BRIDGE_CTL_NO_ISA) {
base |= PCI_IO_BASE_NO_ISA;
}
-
+
f1_write_config32(reg + 0x4, limit);
f1_write_config32(reg, base);
}
else if (resource->flags & IORESOURCE_MEM) {
- uint32_t base, limit;
- compute_allocate_resource(&dev->link[link], resource,
- IORESOURCE_MEM | IORESOURCE_PREFETCH,
- resource->flags & (IORESOURCE_MEM | IORESOURCE_PREFETCH));
+ u32 base, limit;
base = f1_read_config32(reg);
limit = f1_read_config32(reg + 0x4);
base &= 0x000000f0;
base |= 3;
limit &= 0x00000048;
limit |= (rend >> 8) & 0xffffff00;
- limit |= (link & 3) << 4;
+ limit |= (link_num & 3) << 4;
limit |= (nodeid & 7);
f1_write_config32(reg + 0x4, limit);
f1_write_config32(reg, base);
}
resource->flags |= IORESOURCE_STORED;
- sprintf(buf, " <node %d link %d>",
- nodeid, link);
+ sprintf(buf, " <node %x link %x>",
+ nodeid, link_num);
report_resource_stored(dev, resource, buf);
}
-/**
- *
- * I tried to reuse the resource allocation code in amdk8_set_resource()
- * but it is too diffcult to deal with the resource allocation magic.
- */
#if CONFIG_CONSOLE_VGA_MULTI == 1
-extern device_t vga_pri; // the primary vga device, defined in device.c
+extern device_t vga_pri; // the primary vga device, defined in device.c
#endif
static void amdk8_create_vga_resource(device_t dev, unsigned nodeid)
{
struct resource *resource;
- unsigned link;
- uint32_t base, limit;
- unsigned reg;
+ struct bus *link;
/* find out which link the VGA card is connected,
* we only deal with the 'first' vga card */
- for (link = 0; link < dev->links; link++) {
- if (dev->link[link].bridge_ctrl & PCI_BRIDGE_CTL_VGA) {
+ for (link = dev->link_list; link; link = link->next) {
+ if (link->bridge_ctrl & PCI_BRIDGE_CTL_VGA) {
#if CONFIG_CONSOLE_VGA_MULTI == 1
- printk_debug("VGA: vga_pri bus num = %d dev->link[link] bus range [%d,%d]\n", vga_pri->bus->secondary,
- dev->link[link].secondary,dev->link[link].subordinate);
+ printk(BIOS_DEBUG, "VGA: vga_pri bus num = %d link bus range [%d,%d]\n", vga_pri->bus->secondary,
+ link->secondary,link->subordinate);
/* We need to make sure the vga_pri is under the link */
- if((vga_pri->bus->secondary >= dev->link[link].secondary ) &&
- (vga_pri->bus->secondary <= dev->link[link].subordinate )
+ if((vga_pri->bus->secondary >= link->secondary ) &&
+ (vga_pri->bus->secondary <= link->subordinate )
)
#endif
break;
}
}
-
+
/* no VGA card installed */
- if (link == dev->links)
+ if (link == NULL)
return;
- printk_debug("VGA: %s (aka node %d) link %d has VGA device\n", dev_path(dev), nodeid, link);
+ printk(BIOS_DEBUG, "VGA: %s (aka node %d) link %d has VGA device\n", dev_path(dev), nodeid, link->link_num);
- /* allocate a temp resrouce for legacy VGA buffer */
- resource = amdk8_find_mempair(dev, nodeid, link);
+ /* allocate a temp resource for the legacy VGA buffer */
+ resource = new_resource(dev, IOINDEX(4, link->link_num));
if(!resource){
- printk_debug("VGA: Can not find free mmio reg for legacy VGA buffer\n");
+ printk(BIOS_DEBUG, "VGA: %s out of resources.\n", dev_path(dev));
return;
}
resource->base = 0xa0000;
resource->size = 0x20000;
-
- /* write the resource to the hardware */
- reg = resource->index & 0xfc;
- base = f1_read_config32(reg);
- limit = f1_read_config32(reg + 0x4);
- base &= 0x000000f0;
- base |= (resource->base >> 8) & 0xffffff00;
- base |= 3;
- limit &= 0x00000048;
- limit |= ((resource->base + resource->size) >> 8) & 0xffffff00;
- limit |= (resource->index & 3) << 4;
- limit |= (nodeid & 7);
- f1_write_config32(reg + 0x4, limit);
- f1_write_config32(reg, base);
-
- /* release the temp resource */
- resource->flags = 0;
+ resource->limit = 0xffffffff;
+ resource->flags = IORESOURCE_FIXED | IORESOURCE_MEM |
+ IORESOURCE_ASSIGNED;
}
static void amdk8_set_resources(device_t dev)
{
- unsigned nodeid, link;
- int i;
+ unsigned nodeid;
+ struct bus *bus;
+ struct resource *res;
/* Find the nodeid */
nodeid = amdk8_nodeid(dev);
- amdk8_create_vga_resource(dev, nodeid);
-
/* Set each resource we have found */
- for(i = 0; i < dev->resources; i++) {
- amdk8_set_resource(dev, &dev->resource[i], nodeid);
+ for(res = dev->resource_list; res; res = res->next) {
+ struct resource *old = NULL;
+ unsigned index;
+
+ if (res->size == 0) /* No need to allocate registers. */
+ continue;
+
+ if (res->flags & IORESOURCE_IO)
+ index = amdk8_find_iopair(dev, nodeid,
+ IOINDEX_LINK(res->index));
+ else
+ index = amdk8_find_mempair(dev, nodeid,
+ IOINDEX_LINK(res->index));
+
+ old = probe_resource(dev, index);
+ if (old) {
+ res->index = old->index;
+ old->index = 0;
+ old->flags = 0;
+ }
+ else
+ res->index = index;
+
+ amdk8_set_resource(dev, res, nodeid);
}
- for(link = 0; link < dev->links; link++) {
- struct bus *bus;
- bus = &dev->link[link];
+ compact_resources(dev);
+
+ for(bus = dev->link_list; bus; bus = bus->next) {
if (bus->children) {
assign_resources(bus);
}
}
}
-static void amdk8_enable_resources(device_t dev)
-{
- pci_dev_enable_resources(dev);
- enable_childrens_resources(dev);
-}
-
static void mcf0_control_init(struct device *dev)
{
-#if 0
- printk_debug("NB: Function 0 Misc Control.. ");
+#if 0
+ printk(BIOS_DEBUG, "NB: Function 0 Misc Control.. ");
#endif
#if 0
- printk_debug("done.\n");
+ printk(BIOS_DEBUG, "done.\n");
#endif
}
static struct device_operations northbridge_operations = {
- .read_resources = amdk8_read_resources,
- .set_resources = amdk8_set_resources,
- .enable_resources = amdk8_enable_resources,
- .init = mcf0_control_init,
- .scan_bus = amdk8_scan_chains,
- .enable = 0,
- .ops_pci = 0,
+ .read_resources = amdk8_read_resources,
+ .set_resources = amdk8_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = mcf0_control_init,
+ .scan_bus = amdk8_scan_chains,
+ .enable = 0,
+ .ops_pci = 0,
};
-static struct pci_driver mcf0_driver __pci_driver = {
- .ops = &northbridge_operations,
+static const struct pci_driver mcf0_driver __pci_driver = {
+ .ops = &northbridge_operations,
.vendor = PCI_VENDOR_ID_AMD,
.device = 0x1100,
};
-#if CONFIG_CHIP_NAME == 1
-
struct chip_operations northbridge_amd_amdk8_ops = {
CHIP_NAME("AMD K8 Northbridge")
.enable_dev = 0,
};
-#endif
-
-static void pci_domain_read_resources(device_t dev)
+static void amdk8_domain_read_resources(device_t dev)
{
- struct resource *resource;
unsigned reg;
/* Find the already assigned resource pairs */
get_fx_devs();
for(reg = 0x80; reg <= 0xd8; reg+= 0x08) {
- uint32_t base, limit;
+ u32 base, limit;
base = f1_read_config32(reg);
limit = f1_read_config32(reg + 0x04);
/* Is this register allocated? */
if ((base & 3) != 0) {
- unsigned nodeid, link;
- device_t dev;
+ unsigned nodeid, reg_link;
+ device_t reg_dev;
nodeid = limit & 7;
- link = (limit >> 4) & 3;
- dev = __f0_dev[nodeid];
- if (dev) {
+ reg_link = (limit >> 4) & 3;
+ reg_dev = __f0_dev[nodeid];
+ if (reg_dev) {
/* Reserve the resource */
- struct resource *resource;
- resource = new_resource(dev, 0x100 + (reg | link));
- if (resource) {
- resource->flags = 1;
+ struct resource *res;
+ res = new_resource(reg_dev, IOINDEX(0x100 + reg, reg_link));
+ if (res) {
+ res->base = base;
+ res->limit = limit;
+ res->flags = 1;
}
}
}
}
-#if CONFIG_PCI_64BIT_PREF_MEM == 0
- /* Initialize the system wide io space constraints */
- resource = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0));
- resource->base = 0x400;
- resource->limit = 0xffffUL;
- resource->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
-
- /* Initialize the system wide memory resources constraints */
- resource = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0));
- resource->limit = 0xfcffffffffULL;
- resource->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
-#else
- /* Initialize the system wide io space constraints */
- resource = new_resource(dev, 0);
- resource->base = 0x400;
- resource->limit = 0xffffUL;
- resource->flags = IORESOURCE_IO;
- compute_allocate_resource(&dev->link[0], resource,
- IORESOURCE_IO, IORESOURCE_IO);
-
- /* Initialize the system wide prefetchable memory resources constraints */
- resource = new_resource(dev, 1);
- resource->limit = 0xfcffffffffULL;
- resource->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
- compute_allocate_resource(&dev->link[0], resource,
- IORESOURCE_MEM | IORESOURCE_PREFETCH,
- IORESOURCE_MEM | IORESOURCE_PREFETCH);
-
- /* Initialize the system wide memory resources constraints */
- resource = new_resource(dev, 2);
- resource->limit = 0xfcffffffffULL;
- resource->flags = IORESOURCE_MEM;
- compute_allocate_resource(&dev->link[0], resource,
- IORESOURCE_MEM | IORESOURCE_PREFETCH,
- IORESOURCE_MEM);
-#endif
-}
-static void ram_resource(device_t dev, unsigned long index,
- unsigned long basek, unsigned long sizek)
-{
- struct resource *resource;
+ pci_domain_read_resources(dev);
- if (!sizek) {
- return;
- }
- resource = new_resource(dev, index);
- resource->base = ((resource_t)basek) << 10;
- resource->size = ((resource_t)sizek) << 10;
- resource->flags = IORESOURCE_MEM | IORESOURCE_CACHEABLE | \
- IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED;
+#if CONFIG_PCI_64BIT_PREF_MEM == 1
+ /* Initialize the system wide prefetchable memory resources constraints */
+ resource = new_resource(dev, 2);
+ resource->limit = 0xfcffffffffULL;
+ resource->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
+#endif
}
-static void tolm_test(void *gp, struct device *dev, struct resource *new)
+static void my_tolm_test(void *gp, struct device *dev, struct resource *new)
{
struct resource **best_p = gp;
struct resource *best;
best = *best_p;
- if (!best || (best->base > new->base)) {
+ /* Skip VGA. */
+ if (!best || (best->base > new->base && new->base > 0xa0000)) {
best = new;
}
*best_p = best;
}
-static uint32_t find_pci_tolm(struct bus *bus)
+static u32 my_find_pci_tolm(struct bus *bus)
{
struct resource *min;
- uint32_t tolm;
+ u32 tolm;
min = 0;
- search_bus_resources(bus, IORESOURCE_MEM, IORESOURCE_MEM, tolm_test, &min);
+ search_bus_resources(bus, IORESOURCE_MEM, IORESOURCE_MEM, my_tolm_test, &min);
tolm = 0xffffffffUL;
if (min && tolm > min->base) {
tolm = min->base;
return tolm;
}
-#if CONFIG_PCI_64BIT_PREF_MEM == 1
-#define BRIDGE_IO_MASK (IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH)
-#endif
-
-#if K8_HW_MEM_HOLE_SIZEK != 0
+#if CONFIG_HW_MEM_HOLE_SIZEK != 0
struct hw_mem_hole_info {
unsigned hole_startk;
struct hw_mem_hole_info mem_hole;
int i;
- mem_hole.hole_startk = K8_HW_MEM_HOLE_SIZEK;
+ mem_hole.hole_startk = CONFIG_HW_MEM_HOLE_SIZEK;
mem_hole.node_id = -1;
- for (i = 0; i < 8; i++) {
- uint32_t base;
- uint32_t hole;
- base = f1_read_config32(0x40 + (i << 3));
- if ((base & ((1<<1)|(1<<0))) != ((1<<1)|(1<<0))) {
- continue;
- }
-
- hole = pci_read_config32(__f1_dev[i], 0xf0);
- if(hole & 1) { // we find the hole
- mem_hole.hole_startk = (hole & (0xff<<24)) >> 10;
- mem_hole.node_id = i; // record the node No with hole
- break; // only one hole
+ for (i = 0; i < fx_devs; i++) {
+ u32 base;
+ u32 hole;
+ base = f1_read_config32(0x40 + (i << 3));
+ if ((base & ((1<<1)|(1<<0))) != ((1<<1)|(1<<0))) {
+ continue;
+ }
+
+ hole = pci_read_config32(__f1_dev[i], 0xf0);
+ if(hole & 1) { // we find the hole
+ mem_hole.hole_startk = (hole & (0xff<<24)) >> 10;
+ mem_hole.node_id = i; // record the node No with hole
+ break; // only one hole
}
- }
-
- //We need to double check if there is speical set on base reg and limit reg are not continous instead of hole, it will find out it's hole_startk
- if(mem_hole.node_id==-1) {
- uint32_t limitk_pri = 0;
- for(i=0; i<8; i++) {
- uint32_t base, limit;
- unsigned base_k, limit_k;
- base = f1_read_config32(0x40 + (i << 3));
- if ((base & ((1<<1)|(1<<0))) != ((1<<1)|(1<<0))) {
- continue;
- }
-
- base_k = (base & 0xffff0000) >> 2;
- if(limitk_pri != base_k) { // we find the hole
- mem_hole.hole_startk = limitk_pri;
- mem_hole.node_id = i;
- break; //only one hole
+ }
+
+ //We need to double check if there is speical set on base reg and limit reg are not continous instead of hole, it will find out it's hole_startk
+ if(mem_hole.node_id==-1) {
+ u32 limitk_pri = 0;
+ for(i=0; i<8; i++) {
+ u32 base, limit;
+ unsigned base_k, limit_k;
+ base = f1_read_config32(0x40 + (i << 3));
+ if ((base & ((1<<1)|(1<<0))) != ((1<<1)|(1<<0))) {
+ continue;
+ }
+
+ base_k = (base & 0xffff0000) >> 2;
+ if(limitk_pri != base_k) { // we find the hole
+ mem_hole.hole_startk = limitk_pri;
+ mem_hole.node_id = i;
+ break; //only one hole
}
- limit = f1_read_config32(0x44 + (i << 3));
- limit_k = ((limit + 0x00010000) & 0xffff0000) >> 2;
- limitk_pri = limit_k;
- }
- }
-
+ limit = f1_read_config32(0x44 + (i << 3));
+ limit_k = ((limit + 0x00010000) & 0xffff0000) >> 2;
+ limitk_pri = limit_k;
+ }
+ }
return mem_hole;
-
}
-static void disable_hoist_memory(unsigned long hole_startk, int i)
+
+static void disable_hoist_memory(unsigned long hole_startk, int node_id)
{
- int ii;
- device_t dev;
- uint32_t base, limit;
- uint32_t hoist;
- uint32_t hole_sizek;
+ int i;
+ device_t dev;
+ u32 base, limit;
+ u32 hoist;
+ u32 hole_sizek;
- //1. find which node has hole
- //2. change limit in that node.
- //3. change base and limit in later node
- //4. clear that node f0
+ //1. find which node has hole
+ //2. change limit in that node.
+ //3. change base and limit in later node
+ //4. clear that node f0
//if there is not mem hole enabled, we need to change it's base instead
hole_sizek = (4*1024*1024) - hole_startk;
- for(ii=7;ii>i;ii--) {
-
- base = f1_read_config32(0x40 + (ii << 3));
- if ((base & ((1<<1)|(1<<0))) != ((1<<1)|(1<<0))) {
- continue;
- }
- limit = f1_read_config32(0x44 + (ii << 3));
- f1_write_config32(0x44 + (ii << 3),limit - (hole_sizek << 2));
- f1_write_config32(0x40 + (ii << 3),base - (hole_sizek << 2));
- }
- limit = f1_read_config32(0x44 + (i << 3));
- f1_write_config32(0x44 + (i << 3),limit - (hole_sizek << 2));
- dev = __f1_dev[i];
+ for(i=7;i>node_id;i--) {
+
+ base = f1_read_config32(0x40 + (i << 3));
+ if ((base & ((1<<1)|(1<<0))) != ((1<<1)|(1<<0))) {
+ continue;
+ }
+ limit = f1_read_config32(0x44 + (i << 3));
+ f1_write_config32(0x44 + (i << 3),limit - (hole_sizek << 2));
+ f1_write_config32(0x40 + (i << 3),base - (hole_sizek << 2));
+ }
+ limit = f1_read_config32(0x44 + (node_id << 3));
+ f1_write_config32(0x44 + (node_id << 3),limit - (hole_sizek << 2));
+ dev = __f1_dev[node_id];
+ if (dev == NULL) {
+ printk(BIOS_ERR, "%s: node %x is NULL!\n", __func__, node_id);
+ return;
+ }
hoist = pci_read_config32(dev, 0xf0);
if(hoist & 1) {
pci_write_config32(dev, 0xf0, 0);
+ } else {
+ base = pci_read_config32(dev, 0x40 + (node_id << 3));
+ f1_write_config32(0x40 + (node_id << 3),base - (hole_sizek << 2));
}
- else {
- base = pci_read_config32(dev, 0x40 + (i << 3));
- f1_write_config32(0x40 + (i << 3),base - (hole_sizek << 2));
- }
-
}
-static uint32_t hoist_memory(unsigned long hole_startk, int i)
+static u32 hoist_memory(unsigned long hole_startk, int node_id)
{
- int ii;
- uint32_t carry_over;
- device_t dev;
- uint32_t base, limit;
- uint32_t basek;
- uint32_t hoist;
-
- carry_over = (4*1024*1024) - hole_startk;
-
- for(ii=7;ii>i;ii--) {
-
- base = f1_read_config32(0x40 + (ii << 3));
- if ((base & ((1<<1)|(1<<0))) != ((1<<1)|(1<<0))) {
- continue;
- }
- limit = f1_read_config32(0x44 + (ii << 3));
- f1_write_config32(0x44 + (ii << 3),limit + (carry_over << 2));
- f1_write_config32(0x40 + (ii << 3),base + (carry_over << 2));
- }
- limit = f1_read_config32(0x44 + (i << 3));
- f1_write_config32(0x44 + (i << 3),limit + (carry_over << 2));
- dev = __f1_dev[i];
- base = pci_read_config32(dev, 0x40 + (i << 3));
- basek = (base & 0xffff0000) >> 2;
+ int i;
+ u32 carry_over;
+ device_t dev;
+ u32 base, limit;
+ u32 basek;
+ u32 hoist;
+
+ carry_over = (4*1024*1024) - hole_startk;
+
+ for(i=7;i>node_id;i--) {
+
+ base = f1_read_config32(0x40 + (i << 3));
+ if ((base & ((1<<1)|(1<<0))) != ((1<<1)|(1<<0))) {
+ continue;
+ }
+ limit = f1_read_config32(0x44 + (i << 3));
+ f1_write_config32(0x44 + (i << 3),limit + (carry_over << 2));
+ f1_write_config32(0x40 + (i << 3),base + (carry_over << 2));
+ }
+ limit = f1_read_config32(0x44 + (node_id << 3));
+ f1_write_config32(0x44 + (node_id << 3),limit + (carry_over << 2));
+ dev = __f1_dev[node_id];
+ base = pci_read_config32(dev, 0x40 + (node_id << 3));
+ basek = (base & 0xffff0000) >> 2;
if(basek == hole_startk) {
//don't need set memhole here, because hole off set will be 0, overflow
//so need to change base reg instead, new basek will be 4*1024*1024
base &= 0x0000ffff;
base |= (4*1024*1024)<<2;
- f1_write_config32(0x40 + (i<<3), base);
+ f1_write_config32(0x40 + (node_id<<3), base);
}
- else
+ else if (dev)
{
- hoist = /* hole start address */
- ((hole_startk << 10) & 0xff000000) +
- /* hole address to memory controller address */
- (((basek + carry_over) >> 6) & 0x0000ff00) +
- /* enable */
- 1;
-
- pci_write_config32(dev, 0xf0, hoist);
+ hoist = /* hole start address */
+ ((hole_startk << 10) & 0xff000000) +
+ /* hole address to memory controller address */
+ (((basek + carry_over) >> 6) & 0x0000ff00) +
+ /* enable */
+ 1;
+
+ pci_write_config32(dev, 0xf0, hoist);
}
- return carry_over;
+ return carry_over;
}
#endif
-static void pci_domain_set_resources(device_t dev)
+#if CONFIG_WRITE_HIGH_TABLES==1
+#define HIGH_TABLES_SIZE 64 // maximum size of high tables in KB
+extern uint64_t high_tables_base, high_tables_size;
+#if CONFIG_GFXUMA == 1
+extern uint64_t uma_memory_base, uma_memory_size;
+#endif
+#endif
+
+static void amdk8_domain_set_resources(device_t dev)
{
#if CONFIG_PCI_64BIT_PREF_MEM == 1
struct resource *io, *mem1, *mem2;
- struct resource *resource, *last;
+ struct resource *res;
#endif
unsigned long mmio_basek;
- uint32_t pci_tolm;
+ u32 pci_tolm;
int i, idx;
-#if K8_HW_MEM_HOLE_SIZEK != 0
+#if CONFIG_HW_MEM_HOLE_SIZEK != 0
struct hw_mem_hole_info mem_hole;
- unsigned reset_memhole = 1;
+ u32 reset_memhole = 1;
#endif
#if 0
- /* Place the IO devices somewhere safe */
- io = find_resource(dev, 0);
- io->base = DEVICE_IO_START;
+ /* Place the IO devices somewhere safe */
+ io = find_resource(dev, 0);
+ io->base = DEVICE_IO_START;
#endif
#if CONFIG_PCI_64BIT_PREF_MEM == 1
- /* Now reallocate the pci resources memory with the
- * highest addresses I can manage.
- */
- mem1 = find_resource(dev, 1);
- mem2 = find_resource(dev, 2);
+ /* Now reallocate the pci resources memory with the
+ * highest addresses I can manage.
+ */
+ mem1 = find_resource(dev, 1);
+ mem2 = find_resource(dev, 2);
#if 1
- printk_debug("base1: 0x%08Lx limit1: 0x%08Lx size: 0x%08Lx align: %d\n",
- mem1->base, mem1->limit, mem1->size, mem1->align);
- printk_debug("base2: 0x%08Lx limit2: 0x%08Lx size: 0x%08Lx align: %d\n",
- mem2->base, mem2->limit, mem2->size, mem2->align);
+ printk(BIOS_DEBUG, "base1: 0x%08Lx limit1: 0x%08Lx size: 0x%08Lx align: %d\n",
+ mem1->base, mem1->limit, mem1->size, mem1->align);
+ printk(BIOS_DEBUG, "base2: 0x%08Lx limit2: 0x%08Lx size: 0x%08Lx align: %d\n",
+ mem2->base, mem2->limit, mem2->size, mem2->align);
#endif
- /* See if both resources have roughly the same limits */
- if (((mem1->limit <= 0xffffffff) && (mem2->limit <= 0xffffffff)) ||
- ((mem1->limit > 0xffffffff) && (mem2->limit > 0xffffffff)))
- {
- /* If so place the one with the most stringent alignment first
- */
- if (mem2->align > mem1->align) {
- struct resource *tmp;
- tmp = mem1;
- mem1 = mem2;
- mem2 = tmp;
- }
- /* Now place the memory as high up as it will go */
- mem2->base = resource_max(mem2);
- mem1->limit = mem2->base - 1;
- mem1->base = resource_max(mem1);
- }
- else {
- /* Place the resources as high up as they will go */
- mem2->base = resource_max(mem2);
- mem1->base = resource_max(mem1);
- }
-
-#if 1
- printk_debug("base1: 0x%08Lx limit1: 0x%08Lx size: 0x%08Lx align: %d\n",
- mem1->base, mem1->limit, mem1->size, mem1->align);
- printk_debug("base2: 0x%08Lx limit2: 0x%08Lx size: 0x%08Lx align: %d\n",
- mem2->base, mem2->limit, mem2->size, mem2->align);
-#endif
+ /* See if both resources have roughly the same limits */
+ if (((mem1->limit <= 0xffffffff) && (mem2->limit <= 0xffffffff)) ||
+ ((mem1->limit > 0xffffffff) && (mem2->limit > 0xffffffff)))
+ {
+ /* If so place the one with the most stringent alignment first
+ */
+ if (mem2->align > mem1->align) {
+ struct resource *tmp;
+ tmp = mem1;
+ mem1 = mem2;
+ mem2 = tmp;
+ }
+ /* Now place the memory as high up as it will go */
+ mem2->base = resource_max(mem2);
+ mem1->limit = mem2->base - 1;
+ mem1->base = resource_max(mem1);
+ }
+ else {
+ /* Place the resources as high up as they will go */
+ mem2->base = resource_max(mem2);
+ mem1->base = resource_max(mem1);
+ }
- last = &dev->resource[dev->resources];
- for(resource = &dev->resource[0]; resource < last; resource++)
- {
#if 1
- resource->flags |= IORESOURCE_ASSIGNED;
- resource->flags &= ~IORESOURCE_STORED;
+ printk(BIOS_DEBUG, "base1: 0x%08Lx limit1: 0x%08Lx size: 0x%08Lx align: %d\n",
+ mem1->base, mem1->limit, mem1->size, mem1->align);
+ printk(BIOS_DEBUG, "base2: 0x%08Lx limit2: 0x%08Lx size: 0x%08Lx align: %d\n",
+ mem2->base, mem2->limit, mem2->size, mem2->align);
#endif
- compute_allocate_resource(&dev->link[0], resource,
- BRIDGE_IO_MASK, resource->flags & BRIDGE_IO_MASK);
- resource->flags |= IORESOURCE_STORED;
- report_resource_stored(dev, resource, "");
-
- }
+ for(res = dev->resource_list; res; res = res->next)
+ {
+ res->flags |= IORESOURCE_ASSIGNED;
+ res->flags |= IORESOURCE_STORED;
+ report_resource_stored(dev, res, "");
+ }
#endif
+ pci_tolm = my_find_pci_tolm(dev->link_list);
- pci_tolm = find_pci_tolm(&dev->link[0]);
-
-#warning "FIXME handle interleaved nodes"
+ // FIXME handle interleaved nodes. If you fix this here, please fix
+ // amdfam10, too.
mmio_basek = pci_tolm >> 10;
/* Round mmio_basek to something the processor can support */
mmio_basek &= ~((1 << 6) -1);
-#if 1
-#warning "FIXME improve mtrr.c so we don't use up all of the mtrrs with a 64M MMIO hole"
- /* Round the mmio hold to 64M */
+ // FIXME improve mtrr.c so we don't use up all of the mtrrs with a 64M
+ // MMIO hole. If you fix this here, please fix amdfam10, too.
+ /* Round the mmio hole to 64M */
mmio_basek &= ~((64*1024) - 1);
-#endif
-#if K8_HW_MEM_HOLE_SIZEK != 0
- /* if the hw mem hole is already set in raminit stage, here we will compare mmio_basek and hole_basek
- * if mmio_basek is bigger that hole_basek and will use hole_basek as mmio_basek and we don't need to reset hole.
- * otherwise We reset the hole to the mmio_basek
- */
- if (!is_cpu_pre_e0()) {
+#if CONFIG_HW_MEM_HOLE_SIZEK != 0
+ /* if the hw mem hole is already set in raminit stage, here we will compare mmio_basek and hole_basek
+ * if mmio_basek is bigger that hole_basek and will use hole_basek as mmio_basek and we don't need to reset hole.
+ * otherwise We reset the hole to the mmio_basek
+ */
+ #if CONFIG_K8_REV_F_SUPPORT == 0
+ if (!is_cpu_pre_e0()) {
+ #endif
mem_hole = get_hw_mem_hole_info();
- if ((mem_hole.node_id != -1) && (mmio_basek > mem_hole.hole_startk)) { //We will use hole_basek as mmio_basek, and we don't need to reset hole anymore
- mmio_basek = mem_hole.hole_startk;
+ if ((mem_hole.node_id != -1) && (mmio_basek > mem_hole.hole_startk)) { //We will use hole_basek as mmio_basek, and we don't need to reset hole anymore
+ mmio_basek = mem_hole.hole_startk;
reset_memhole = 0;
- }
-
+ }
+
//mmio_basek = 3*1024*1024; // for debug to meet boundary
if(reset_memhole) {
- if(mem_hole.node_id!=-1) { // We need to select K8_HW_MEM_HOLE_SIZEK for raminit, it can not make hole_startk to some basek too....!
- // We need to reset our Mem Hole, because We want more big HOLE than we already set
- //Before that We need to disable mem hole at first, becase memhole could already be set on i+1 instead
- disable_hoist_memory(mem_hole.hole_startk, mem_hole.node_id);
+ if(mem_hole.node_id!=-1) { // We need to select CONFIG_HW_MEM_HOLE_SIZEK for raminit, it can not make hole_startk to some basek too....!
+ // We need to reset our Mem Hole, because We want more big HOLE than we already set
+ //Before that We need to disable mem hole at first, becase memhole could already be set on i+1 instead
+ disable_hoist_memory(mem_hole.hole_startk, mem_hole.node_id);
}
- #if K8_HW_MEM_HOLE_SIZE_AUTO_INC == 1
+ #if CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC == 1
//We need to double check if the mmio_basek is valid for hole setting, if it is equal to basek, we need to decrease it some
- uint32_t basek_pri;
- for (i = 0; i < 8; i++) {
- uint32_t base;
- uint32_t basek;
- base = f1_read_config32(0x40 + (i << 3));
- if ((base & ((1<<1)|(1<<0))) != ((1<<1)|(1<<0))) {
- continue;
- }
+ u32 basek_pri;
+ for (i = 0; i < fx_devs; i++) {
+ u32 base;
+ u32 basek;
+ base = f1_read_config32(0x40 + (i << 3));
+ if ((base & ((1<<1)|(1<<0))) != ((1<<1)|(1<<0))) {
+ continue;
+ }
basek = (base & 0xffff0000) >> 2;
if(mmio_basek == basek) {
- mmio_basek -= (basek - basek_pri)>>1; // increase mem hole size to make sure it is on middle of pri node
- break;
+ mmio_basek -= (basek - basek_pri)>>1; // increase mem hole size to make sure it is on middle of pri node
+ break;
}
basek_pri = basek;
- }
- #endif
- }
+ }
+ #endif
+ }
+#if CONFIG_K8_REV_F_SUPPORT == 0
} // is_cpu_pre_e0
+#endif
#endif
idx = 0x10;
- for(i = 0; i < 8; i++) {
- uint32_t base, limit;
- unsigned basek, limitk, sizek;
+ for(i = 0; i < fx_devs; i++) {
+ u32 base, limit;
+ u32 basek, limitk, sizek;
base = f1_read_config32(0x40 + (i << 3));
limit = f1_read_config32(0x44 + (i << 3));
if ((base & ((1<<1)|(1<<0))) != ((1<<1)|(1<<0))) {
idx += 0x10;
basek = (8*64)+(16*16);
sizek = limitk - ((8*64)+(16*16));
-
+
}
-
-// printk_debug("node %d : mmio_basek=%08x, basek=%08x, limitk=%08x\n", i, mmio_basek, basek, limitk); //yhlu
-
+
+#if CONFIG_GFXUMA == 1
+ printk(BIOS_DEBUG, "node %d : uma_memory_base/1024=0x%08llx, mmio_basek=0x%08lx, basek=0x%08x, limitk=0x%08x\n", i, uma_memory_base >> 10, mmio_basek, basek, limitk);
+ if ((uma_memory_base >> 10) < mmio_basek)
+ printk(BIOS_ALERT, "node %d: UMA memory starts below mmio_basek\n", i);
+#else
+// printk(BIOS_DEBUG, "node %d : mmio_basek=%08x, basek=%08x, limitk=%08x\n", i, mmio_basek, basek, limitk); //yhlu
+#endif
+
/* See if I need to split the region to accomodate pci memory space */
if ( (basek < 4*1024*1024 ) && (limitk > mmio_basek) ) {
if (basek <= mmio_basek) {
ram_resource(dev, (idx | i), basek, pre_sizek);
idx += 0x10;
sizek -= pre_sizek;
+#if CONFIG_WRITE_HIGH_TABLES==1
+ if (high_tables_base==0) {
+ /* Leave some space for ACPI, PIRQ and MP tables */
+#if CONFIG_GFXUMA == 1
+ high_tables_base = uma_memory_base - (HIGH_TABLES_SIZE * 1024);
+#else
+ high_tables_base = (mmio_basek - HIGH_TABLES_SIZE) * 1024;
+#endif
+ high_tables_size = HIGH_TABLES_SIZE * 1024;
+ printk(BIOS_DEBUG, " split: %dK table at =%08llx\n", HIGH_TABLES_SIZE,
+ high_tables_base);
+ }
+#endif
}
- #if K8_HW_MEM_HOLE_SIZEK != 0
- if(reset_memhole)
- if(!is_cpu_pre_e0() )
- sizek += hoist_memory(mmio_basek,i);
+ #if CONFIG_HW_MEM_HOLE_SIZEK != 0
+ if(reset_memhole)
+ #if CONFIG_K8_REV_F_SUPPORT == 0
+ if(!is_cpu_pre_e0() )
+ #endif
+ sizek += hoist_memory(mmio_basek,i);
#endif
-
+
basek = mmio_basek;
}
if ((basek + sizek) <= 4*1024*1024) {
sizek -= (4*1024*1024 - mmio_basek);
}
}
- ram_resource(dev, (idx | i), basek, sizek);
+ /* If sizek == 0, it was split at mmio_basek without a hole.
+ * Don't create an empty ram_resource.
+ */
+ if (sizek)
+ ram_resource(dev, (idx | i), basek, sizek);
idx += 0x10;
+#if CONFIG_WRITE_HIGH_TABLES==1
+ printk(BIOS_DEBUG, "%d: mmio_basek=%08lx, basek=%08x, limitk=%08x\n",
+ i, mmio_basek, basek, limitk);
+ if (high_tables_base==0) {
+ /* Leave some space for ACPI, PIRQ and MP tables */
+#if CONFIG_GFXUMA == 1
+ high_tables_base = uma_memory_base - (HIGH_TABLES_SIZE * 1024);
+#else
+ high_tables_base = (limitk - HIGH_TABLES_SIZE) * 1024;
+#endif
+ high_tables_size = HIGH_TABLES_SIZE * 1024;
+ }
+#endif
}
- assign_resources(&dev->link[0]);
+ assign_resources(dev->link_list);
+
}
-static unsigned int pci_domain_scan_bus(device_t dev, unsigned int max)
+static u32 amdk8_domain_scan_bus(device_t dev, u32 max)
{
- unsigned reg;
+ u32 reg;
int i;
/* Unmap all of the HT chains */
for(reg = 0xe0; reg <= 0xec; reg += 4) {
f1_write_config32(reg, 0);
}
- max = pci_scan_bus(&dev->link[0], PCI_DEVFN(0x18, 0), 0xff, max);
-
+ max = pci_scan_bus(dev->link_list, PCI_DEVFN(0x18, 0), 0xff, max);
+
/* Tune the hypertransport transaction for best performance.
* Including enabling relaxed ordering if it is safe.
*/
get_fx_devs();
- for(i = 0; i < FX_DEVS; i++) {
+ for(i = 0; i < fx_devs; i++) {
device_t f0_dev;
f0_dev = __f0_dev[i];
if (f0_dev && f0_dev->enabled) {
- uint32_t httc;
- int j;
+ u32 httc;
httc = pci_read_config32(f0_dev, HT_TRANSACTION_CONTROL);
httc &= ~HTTC_RSP_PASS_PW;
- if (!dev->link[0].disable_relaxed_ordering) {
+ if (!dev->link_list->disable_relaxed_ordering) {
httc |= HTTC_RSP_PASS_PW;
}
- printk_spew("%s passpw: %s\n",
+ printk(BIOS_SPEW, "%s passpw: %s\n",
dev_path(dev),
- (!dev->link[0].disable_relaxed_ordering)?
+ (!dev->link_list->disable_relaxed_ordering)?
"enabled":"disabled");
pci_write_config32(f0_dev, HT_TRANSACTION_CONTROL, httc);
}
}
static struct device_operations pci_domain_ops = {
- .read_resources = pci_domain_read_resources,
- .set_resources = pci_domain_set_resources,
- .enable_resources = enable_childrens_resources,
- .init = 0,
- .scan_bus = pci_domain_scan_bus,
- .ops_pci_bus = &pci_cf8_conf1,
+ .read_resources = amdk8_domain_read_resources,
+ .set_resources = amdk8_domain_set_resources,
+ .enable_resources = NULL,
+ .init = NULL,
+ .scan_bus = amdk8_domain_scan_bus,
+ .ops_pci_bus = &pci_cf8_conf1,
};
-static unsigned int cpu_bus_scan(device_t dev, unsigned int max)
+static void add_more_links(device_t dev, unsigned total_links)
+{
+ struct bus *link, *last = NULL;
+ int link_num;
+
+ for (link = dev->link_list; link; link = link->next)
+ last = link;
+
+ if (last) {
+ int links = total_links - last->link_num;
+ link_num = last->link_num;
+ if (links > 0) {
+ link = malloc(links*sizeof(*link));
+ if (!link)
+ die("Couldn't allocate more links!\n");
+ memset(link, 0, links*sizeof(*link));
+ last->next = link;
+ }
+ }
+ else {
+ link_num = -1;
+ link = malloc(total_links*sizeof(*link));
+ memset(link, 0, total_links*sizeof(*link));
+ dev->link_list = link;
+ }
+
+ for (link_num = link_num + 1; link_num < total_links; link_num++) {
+ link->link_num = link_num;
+ link->dev = dev;
+ link->next = link + 1;
+ last = link;
+ link = link->next;
+ }
+ last->next = NULL;
+}
+
+static u32 cpu_bus_scan(device_t dev, u32 max)
{
struct bus *cpu_bus;
device_t dev_mc;
int bsp_apicid;
- int apicid_offset;
int i,j;
- int nodes;
unsigned nb_cfg_54;
- int enable_apic_ext_id;
unsigned siblings;
- int e0_later_single_core;
+ int e0_later_single_core;
int disable_siblings;
- unsigned lift_bsp_apicid;
nb_cfg_54 = 0;
- enable_apic_ext_id = 0;
- lift_bsp_apicid = 0;
+ sysconf.enabled_apic_ext_id = 0;
+ sysconf.lift_bsp_apicid = 0;
siblings = 0;
/* Find the bootstrap processors apicid */
bsp_apicid = lapicid();
- apicid_offset = bsp_apicid;
+ sysconf.apicid_offset = bsp_apicid;
disable_siblings = !CONFIG_LOGICAL_CPUS;
#if CONFIG_LOGICAL_CPUS == 1
- get_option(&disable_siblings, "dual_core");
+ get_option(&disable_siblings, "multi_core");
#endif
- // for pre_e0, nb_cfg_54 can not be set, ( even set, when you read it still be 0)
- // How can I get the nb_cfg_54 of every node' nb_cfg_54 in bsp??? and differ d0 and e0 single core
-
+ // for pre_e0, nb_cfg_54 can not be set, (when you read it still is 0)
+ // How can I get the nb_cfg_54 of every node's nb_cfg_54 in bsp???
+ // and differ d0 and e0 single core
nb_cfg_54 = read_nb_cfg_54();
dev_mc = dev_find_slot(0, PCI_DEVFN(0x18, 0));
die("0:18.0 not found?");
}
- nodes = ((pci_read_config32(dev_mc, 0x60)>>4) & 7) + 1;
+ sysconf.nodes = ((pci_read_config32(dev_mc, 0x60)>>4) & 7) + 1;
+
if (pci_read_config32(dev_mc, 0x68) & (HTTC_APIC_EXT_ID|HTTC_APIC_EXT_BRD_CST))
{
- enable_apic_ext_id = 1;
+ sysconf.enabled_apic_ext_id = 1;
if(bsp_apicid == 0) {
/* bsp apic id is not changed */
- apicid_offset = APIC_ID_OFFSET;
- } else
+ sysconf.apicid_offset = CONFIG_APIC_ID_OFFSET;
+ } else
{
- lift_bsp_apicid = 1;
- }
-
+ sysconf.lift_bsp_apicid = 1;
+ }
+
}
/* Find which cpus are present */
- cpu_bus = &dev->link[0];
- for(i = 0; i < nodes; i++) {
- device_t dev, cpu;
+ cpu_bus = dev->link_list;
+ for(i = 0; i < sysconf.nodes; i++) {
+ device_t cpu_dev, cpu;
struct device_path cpu_path;
/* Find the cpu's pci device */
- dev = dev_find_slot(0, PCI_DEVFN(0x18 + i, 3));
- if (!dev) {
+ cpu_dev = dev_find_slot(0, PCI_DEVFN(0x18 + i, 3));
+ if (!cpu_dev) {
/* If I am probing things in a weird order
* ensure all of the cpu's pci devices are found.
*/
- int j;
+ int local_j;
device_t dev_f0;
- for(j = 0; j <= 3; j++) {
- dev = pci_probe_dev(NULL, dev_mc->bus,
- PCI_DEVFN(0x18 + i, j));
+ for(local_j = 0; local_j <= 3; local_j++) {
+ cpu_dev = pci_probe_dev(NULL, dev_mc->bus,
+ PCI_DEVFN(0x18 + i, local_j));
}
/* Ok, We need to set the links for that device.
* otherwise the device under it will not be scanned
*/
dev_f0 = dev_find_slot(0, PCI_DEVFN(0x18+i,0));
if(dev_f0) {
- dev_f0->links = 3;
- for(j=0;j<3;j++) {
- dev_f0->link[j].link = j;
- dev_f0->link[j].dev = dev_f0;
- }
+ add_more_links(dev_f0, 3);
}
-
}
e0_later_single_core = 0;
- if (dev && dev->enabled) {
- j = pci_read_config32(dev, 0xe8);
+ if (cpu_dev && cpu_dev->enabled) {
+ j = pci_read_config32(cpu_dev, 0xe8);
j = (j >> 12) & 3; // dev is func 3
- printk_debug(" %s siblings=%d\r\n", dev_path(dev), j);
+ printk(BIOS_DEBUG, " %s siblings=%d\n", dev_path(cpu_dev), j);
if(nb_cfg_54) {
- // For e0 single core if nb_cfg_54 is set, apicid will be 0, 2, 4....
+ // For e0 single core if nb_cfg_54 is set, apicid will be 0, 2, 4....
// ----> you can mixed single core e0 and dual core e0 at any sequence
// That is the typical case
- if(j == 0 ){
- e0_later_single_core = is_e0_later_in_bsp(i); // single core
- } else {
- e0_later_single_core = 0;
- }
- if(e0_later_single_core) {
- printk_debug("\tFound Rev E or Rev F later single core\r\n");
-
- j=1;
+ if(j == 0 ){
+ #if CONFIG_K8_REV_F_SUPPORT == 0
+ e0_later_single_core = is_e0_later_in_bsp(i); // single core
+ #else
+ e0_later_single_core = is_cpu_f0_in_bsp(i); // We can read cpuid(1) from Func3
+ #endif
+ } else {
+ e0_later_single_core = 0;
+ }
+ if(e0_later_single_core) {
+ printk(BIOS_DEBUG, "\tFound Rev E or Rev F later single core\n");
+
+ j=1;
}
-
+
if(siblings > j ) {
}
else {
siblings = j;
}
}
-
- unsigned jj;
+
+ u32 jj;
if(e0_later_single_core || disable_siblings) {
jj = 0;
- } else
+ } else
{
jj = siblings;
}
-#if 0
+#if 0
jj = 0; // if create cpu core1 path in amd_siblings by core0
#endif
-
- for (j = 0; j <=jj; j++ ) {
-
+
+ for (j = 0; j <=jj; j++ ) {
+
/* Build the cpu device path */
cpu_path.type = DEVICE_PATH_APIC;
- cpu_path.u.apic.apic_id = i * (nb_cfg_54?(siblings+1):1) + j * (nb_cfg_54?1:8);
-
+ cpu_path.apic.apic_id = i * (nb_cfg_54?(siblings+1):1) + j * (nb_cfg_54?1:8);
+
/* See if I can find the cpu */
cpu = find_dev_path(cpu_bus, &cpu_path);
-
+
/* Enable the cpu if I have the processor */
- if (dev && dev->enabled) {
+ if (cpu_dev && cpu_dev->enabled) {
if (!cpu) {
cpu = alloc_dev(cpu_bus, &cpu_path);
}
cpu->enabled = 1;
}
}
-
+
/* Disable the cpu if I don't have the processor */
- if (cpu && (!dev || !dev->enabled)) {
+ if (cpu && (!cpu_dev || !cpu_dev->enabled)) {
cpu->enabled = 0;
}
/* Report what I have done */
if (cpu) {
- cpu->path.u.apic.node_id = i;
- cpu->path.u.apic.core_id = j;
- if(enable_apic_ext_id) {
- if(lift_bsp_apicid) {
- cpu->path.u.apic.apic_id += apicid_offset;
- } else
+ cpu->path.apic.node_id = i;
+ cpu->path.apic.core_id = j;
+ if(sysconf.enabled_apic_ext_id) {
+ if(sysconf.lift_bsp_apicid) {
+ cpu->path.apic.apic_id += sysconf.apicid_offset;
+ } else
{
- if (cpu->path.u.apic.apic_id != 0)
- cpu->path.u.apic.apic_id += apicid_offset;
- }
+ if (cpu->path.apic.apic_id != 0)
+ cpu->path.apic.apic_id += sysconf.apicid_offset;
+ }
}
- printk_debug("CPU: %s %s\n",
+ printk(BIOS_DEBUG, "CPU: %s %s\n",
dev_path(cpu), cpu->enabled?"enabled":"disabled");
}
static void cpu_bus_init(device_t dev)
{
- initialize_cpus(&dev->link[0]);
+ initialize_cpus(dev->link_list);
}
-static void cpu_bus_noop(device_t dev)
+static void cpu_bus_noop(device_t dev)
{
}
static struct device_operations cpu_bus_ops = {
- .read_resources = cpu_bus_noop,
- .set_resources = cpu_bus_noop,
+ .read_resources = cpu_bus_noop,
+ .set_resources = cpu_bus_noop,
.enable_resources = cpu_bus_noop,
- .init = cpu_bus_init,
- .scan_bus = cpu_bus_scan,
+ .init = cpu_bus_init,
+ .scan_bus = cpu_bus_scan,
};
static void root_complex_enable_dev(struct device *dev)
projects / coreboot.git / blobdiff