#include <device/pci_ids.h>
#include <device/hypertransport_def.h>
-#ifndef K8_HT_FREQ_1G_SUPPORT
- #define K8_HT_FREQ_1G_SUPPORT 0
-#endif
-
-#ifndef K8_SCAN_PCI_BUS
- #define K8_SCAN_PCI_BUS 0
-#endif
-
-#ifndef K8_ALLOCATE_IO_RANGE
- #define K8_ALLOCATE_IO_RANGE 0
-#endif
-
-// Do we need allocate MMIO? Current We direct last 64M to sblink only, We can not lose access to last 4M range to ROM
+// Do we need allocate MMIO? Current We direct last 64M to sblink only, We can not lose access to last 4M range to ROM
#ifndef K8_ALLOCATE_MMIO_RANGE
- #define K8_ALLOCATE_MMIO_RANGE 0
+ #define K8_ALLOCATE_MMIO_RANGE 0
#endif
static inline void print_linkn_in (const char *strval, uint8_t byteval)
{
-#if CONFIG_USE_INIT
- printk_debug("%s%02x\r\n", strval, byteval);
-#else
- print_debug(strval); print_debug_hex8(byteval); print_debug("\r\n");
-#endif
+ printk(BIOS_DEBUG, "%s%02x\n", strval, byteval);
}
static uint8_t ht_lookup_capability(device_t dev, uint16_t val)
}
static uint8_t ht_lookup_slave_capability(device_t dev)
-{
+{
return ht_lookup_capability(dev, 0); // Slave/Primary Interface Block Format
}
+#if 0
static uint8_t ht_lookup_host_capability(device_t dev)
{
- return ht_lookup_capability(dev, 1); // Host/Secondary Interface Block Format
+ return ht_lookup_capability(dev, 1); // Host/Secondary Interface Block Format
}
+#endif
static void ht_collapse_previous_enumeration(uint8_t bus, unsigned offset_unitid)
{
device_t dev;
- uint32_t id;
//actually, only for one HT device HT chain, and unitid is 0
-#if HT_CHAIN_UNITID_BASE == 0
+#if CONFIG_HT_CHAIN_UNITID_BASE == 0
if(offset_unitid) {
return;
}
#endif
/* Check if is already collapsed */
- if((!offset_unitid) || (offset_unitid && (!((HT_CHAIN_END_UNITID_BASE == 0) && (HT_CHAIN_END_UNITID_BASE <HT_CHAIN_UNITID_BASE))))) {
+ if((!offset_unitid) || (offset_unitid && (!((CONFIG_HT_CHAIN_END_UNITID_BASE == 0) && (CONFIG_HT_CHAIN_END_UNITID_BASE <CONFIG_HT_CHAIN_UNITID_BASE))))) {
+ uint32_t id;
dev = PCI_DEV(bus, 0, 0);
- id = pci_read_config32(dev, PCI_VENDOR_ID);
- if ( ! ( (id == 0xffffffff) || (id == 0x00000000) ||
- (id == 0x0000ffff) || (id == 0xffff0000) ) ) {
- return;
- }
- }
+ id = pci_read_config32(dev, PCI_VENDOR_ID);
+ if (!((id == 0xffffffff) || (id == 0x00000000) ||
+ (id == 0x0000ffff) || (id == 0xffff0000))) {
+ return;
+ }
+ }
/* Spin through the devices and collapse any previous
* hypertransport enumeration.
uint32_t id;
uint8_t pos;
uint16_t flags;
-
+
id = pci_read_config32(dev, PCI_VENDOR_ID);
if ((id == 0xffffffff) || (id == 0x00000000) ||
(id == 0x0000ffff) || (id == 0xffff0000)) {
continue;
}
-#if 0
-#if CK804_DEVN_BASE==0
- //CK804 workaround:
- // CK804 UnitID changes not use
- if(id == 0x005e10de) {
- break;
- }
-#endif
-#endif
-
+
pos = ht_lookup_slave_capability(dev);
if (!pos) {
continue;
uint32_t id;
freq_cap = pci_read_config16(dev, pos);
+ printk(BIOS_SPEW, "pos=0x%x, unfiltered freq_cap=0x%x\n", pos, freq_cap);
freq_cap &= ~(1 << HT_FREQ_VENDOR); /* Ignore Vendor HT frequencies */
id = pci_read_config32(dev, 0);
if (id == (PCI_VENDOR_ID_AMD | (PCI_DEVICE_ID_AMD_8151_SYSCTRL << 16))) {
freq_cap &= ~(1 << HT_FREQ_800Mhz);
return freq_cap;
- }
-
+ }
+
/* AMD K8 Unsupported 1Ghz? */
if (id == (PCI_VENDOR_ID_AMD | (0x1100 << 16))) {
- #if K8_HT_FREQ_1G_SUPPORT == 1
- if (is_cpu_pre_e0()) { // only E0 later support 1GHz
+ #if CONFIG_K8_HT_FREQ_1G_SUPPORT == 1
+ #if CONFIG_K8_REV_F_SUPPORT == 0
+ if (is_cpu_pre_e0()) { // only E0 later support 1GHz
freq_cap &= ~(1 << HT_FREQ_1000Mhz);
}
- #else
- freq_cap &= ~(1 << HT_FREQ_1000Mhz);
+ #endif
+ #else
+ freq_cap &= ~(1 << HT_FREQ_1000Mhz);
#endif
}
+ printk(BIOS_SPEW, "pos=0x%x, filtered freq_cap=0x%x\n", pos, freq_cap);
+
+ #if CONFIG_SOUTHBRIDGE_VIA_K8M890 == 1
+ freq_cap &= 0x3f;
+ printk(BIOS_INFO, "Limiting HT to 800/600/400/200 MHz until K8M890 HT1000 is fixed.\n");
+ #endif
return freq_cap;
}
+
+static uint8_t ht_read_width_cap(device_t dev, uint8_t pos)
+{
+ uint8_t width_cap = pci_read_config8(dev, pos);
+
+ uint32_t id;
+
+ id = pci_read_config32(dev, 0);
+
+ /* netlogic micro cap doesn't support 16 bit yet */
+ if (id == (0x184e | (0x0001 << 16))) {
+ if((width_cap & 0x77) == 0x11) {
+ width_cap &= 0x88;
+ }
+ }
+
+ return width_cap;
+
+}
+
#define LINK_OFFS(CTRL, WIDTH,FREQ,FREQ_CAP) \
- (((CTRL & 0xff) << 24) | ((WIDTH & 0xff) << 16) | ((FREQ & 0xff) << 8) | (FREQ_CAP & 0xFF))
+ (((CTRL & 0xff) << 24) | ((WIDTH & 0xff) << 16) | ((FREQ & 0xff) << 8) | (FREQ_CAP & 0xFF))
#define LINK_CTRL(OFFS) ((OFFS >> 24) & 0xFF)
#define LINK_WIDTH(OFFS) ((OFFS >> 16) & 0xFF)
#define LINK_FREQ_CAP(OFFS) ((OFFS) & 0xFF)
#define PCI_HT_HOST_OFFS LINK_OFFS( \
- PCI_HT_CAP_HOST_CTRL, \
+ PCI_HT_CAP_HOST_CTRL, \
PCI_HT_CAP_HOST_WIDTH, \
PCI_HT_CAP_HOST_FREQ, \
PCI_HT_CAP_HOST_FREQ_CAP)
#define PCI_HT_SLAVE0_OFFS LINK_OFFS( \
- PCI_HT_CAP_SLAVE_CTRL0, \
+ PCI_HT_CAP_SLAVE_CTRL0, \
PCI_HT_CAP_SLAVE_WIDTH0, \
PCI_HT_CAP_SLAVE_FREQ0, \
PCI_HT_CAP_SLAVE_FREQ_CAP0)
#define PCI_HT_SLAVE1_OFFS LINK_OFFS( \
- PCI_HT_CAP_SLAVE_CTRL1, \
+ PCI_HT_CAP_SLAVE_CTRL1, \
PCI_HT_CAP_SLAVE_WIDTH1, \
PCI_HT_CAP_SLAVE_FREQ1, \
PCI_HT_CAP_SLAVE_FREQ_CAP1)
int needs_reset;
/* Set link width and frequency */
+ printk(BIOS_SPEW, "entering ht_optimize_link\n");
/* Initially assume everything is already optimized and I don't need a reset */
needs_reset = 0;
/* Get the frequency capabilities */
freq_cap1 = ht_read_freq_cap(dev1, pos1 + LINK_FREQ_CAP(offs1));
freq_cap2 = ht_read_freq_cap(dev2, pos2 + LINK_FREQ_CAP(offs2));
+ printk(BIOS_SPEW, "freq_cap1=0x%x, freq_cap2=0x%x\n", freq_cap1, freq_cap2);
/* Calculate the highest possible frequency */
freq = log2(freq_cap1 & freq_cap2);
old_freq = pci_read_config8(dev1, pos1 + LINK_FREQ(offs1));
old_freq &= 0x0f;
needs_reset |= old_freq != freq;
+ printk(BIOS_SPEW, "dev1 old_freq=0x%x, freq=0x%x, needs_reset=0x%0x\n", old_freq, freq, needs_reset);
old_freq = pci_read_config8(dev2, pos2 + LINK_FREQ(offs2));
old_freq &= 0x0f;
needs_reset |= old_freq != freq;
+ printk(BIOS_SPEW, "dev2 old_freq=0x%x, freq=0x%x, needs_reset=0x%0x\n", old_freq, freq, needs_reset);
- /* Set the Calulcated link frequency */
+ /* Set the Calculated link frequency */
pci_write_config8(dev1, pos1 + LINK_FREQ(offs1), freq);
pci_write_config8(dev2, pos2 + LINK_FREQ(offs2), freq);
/* Get the width capabilities */
- width_cap1 = pci_read_config8(dev1, pos1 + LINK_WIDTH(offs1));
- width_cap2 = pci_read_config8(dev2, pos2 + LINK_WIDTH(offs2));
+ width_cap1 = ht_read_width_cap(dev1, pos1 + LINK_WIDTH(offs1));
+ width_cap2 = ht_read_width_cap(dev2, pos2 + LINK_WIDTH(offs2));
+ printk(BIOS_SPEW, "width_cap1=0x%x, width_cap2=0x%x\n", width_cap1, width_cap2);
/* Calculate dev1's input width */
ln_width1 = link_width_to_pow2[width_cap1 & 7];
ln_width2 = link_width_to_pow2[(width_cap2 >> 4) & 7];
+ printk(BIOS_SPEW, "dev1 input ln_width1=0x%x, ln_width2=0x%x\n", ln_width1, ln_width2);
if (ln_width1 > ln_width2) {
ln_width1 = ln_width2;
}
width = pow2_to_link_width[ln_width1];
+ printk(BIOS_SPEW, "dev1 input width=0x%x\n", width);
/* Calculate dev1's output width */
ln_width1 = link_width_to_pow2[(width_cap1 >> 4) & 7];
ln_width2 = link_width_to_pow2[width_cap2 & 7];
+ printk(BIOS_SPEW, "dev1 output ln_width1=0x%x, ln_width2=0x%x\n", ln_width1, ln_width2);
if (ln_width1 > ln_width2) {
ln_width1 = ln_width2;
}
width |= pow2_to_link_width[ln_width1] << 4;
+ printk(BIOS_SPEW, "dev1 input|output width=0x%x\n", width);
/* See if I am changing dev1's width */
old_width = pci_read_config8(dev1, pos1 + LINK_WIDTH(offs1) + 1);
old_width &= 0x77;
needs_reset |= old_width != width;
+ printk(BIOS_SPEW, "old dev1 input|output width=0x%x\n", width);
/* Set dev1's widths */
pci_write_config8(dev1, pos1 + LINK_WIDTH(offs1) + 1, width);
/* Calculate dev2's width */
width = ((width & 0x70) >> 4) | ((width & 0x7) << 4);
+ printk(BIOS_SPEW, "dev2 input|output width=0x%x\n", width);
/* See if I am changing dev2's width */
old_width = pci_read_config8(dev2, pos2 + LINK_WIDTH(offs2) + 1);
old_width &= 0x77;
needs_reset |= old_width != width;
+ printk(BIOS_SPEW, "old dev2 input|output width=0x%x\n", width);
/* Set dev2's widths */
pci_write_config8(dev2, pos2 + LINK_WIDTH(offs2) + 1, width);
return needs_reset;
}
-#if (USE_DCACHE_RAM == 1) && (K8_SCAN_PCI_BUS == 1)
-
-#if RAMINIT_SYSINFO == 1
-static void ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned offset_unitid, struct sys_info *sysinfo);
-static int scan_pci_bus( unsigned bus , struct sys_info *sysinfo)
-#else
-static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned offset_unitid);
-static int scan_pci_bus( unsigned bus)
-#endif
-{
- /*
- here we already can access PCI_DEV(bus, 0, 0) to PCI_DEV(bus, 0x1f, 0x7)
- So We can scan these devices to find out if they are bridge
- If it is pci bridge, We need to set busn in bridge, and go on
- For ht bridge, We need to set the busn in bridge and ht_setup_chainx, and the scan_pci_bus
- */
- unsigned int devfn;
- unsigned new_bus;
- unsigned max_bus;
-
- new_bus = (bus & 0xff); // mask out the reset_needed
-
- if(new_bus<0x40) {
- max_bus = 0x3f;
- } else if (new_bus<0x80) {
- max_bus = 0x7f;
- } else if (new_bus<0xc0) {
- max_bus = 0xbf;
- } else {
- max_bus = 0xff;
- }
-
- new_bus = bus;
-
-#if 0
-#if CONFIG_USE_INIT == 1
- printk_debug("bus_num=%02x\r\n", bus);
-#endif
-#endif
-
- for (devfn = 0; devfn <= 0xff; devfn++) {
- uint8_t hdr_type;
- uint16_t class;
- uint32_t buses;
- device_t dev;
- uint16_t cr;
- dev = PCI_DEV((bus & 0xff), ((devfn>>3) & 0x1f), (devfn & 0x7));
- hdr_type = pci_read_config8(dev, PCI_HEADER_TYPE);
- class = pci_read_config16(dev, PCI_CLASS_DEVICE);
-
-#if 0
-#if CONFIG_USE_INIT == 1
- if(hdr_type !=0xff ) {
- printk_debug("dev=%02x fn=%02x hdr_type=%02x class=%04x\r\n",
- (devfn>>3)& 0x1f, (devfn & 0x7), hdr_type, class);
- }
-#endif
-#endif
- switch(hdr_type & 0x7f) { /* header type */
- case PCI_HEADER_TYPE_BRIDGE:
- if (class != PCI_CLASS_BRIDGE_PCI) goto bad;
- /* set the bus range dev */
-
- /* Clear all status bits and turn off memory, I/O and master enables. */
- cr = pci_read_config16(dev, PCI_COMMAND);
- pci_write_config16(dev, PCI_COMMAND, 0x0000);
- pci_write_config16(dev, PCI_STATUS, 0xffff);
-
- buses = pci_read_config32(dev, PCI_PRIMARY_BUS);
-
- buses &= 0xff000000;
- new_bus++;
- buses |= (((unsigned int) (bus & 0xff) << 0) |
- ((unsigned int) (new_bus & 0xff) << 8) |
- ((unsigned int) max_bus << 16));
- pci_write_config32(dev, PCI_PRIMARY_BUS, buses);
-
- /* here we need to figure out if dev is a ht bridge
- if it is ht bridge, we need to call ht_setup_chainx at first
- Not verified --- yhlu
- */
- uint8_t upos;
- upos = ht_lookup_host_capability(dev); // one func one ht sub
- if (upos) { // sub ht chain
- uint8_t busn;
- busn = (new_bus & 0xff);
- /* Make certain the HT bus is not enumerated */
- ht_collapse_previous_enumeration(busn, 0);
- /* scan the ht chain */
- #if RAMINIT_SYSINFO == 1
- ht_setup_chainx(dev,upos,busn, 0, sysinfo); // don't need offset unitid
- #else
- new_bus |= (ht_setup_chainx(dev, upos, busn, 0)<<16); // store reset_needed to upword
- #endif
- }
-
- #if RAMINIT_SYSINFO == 1
- new_bus = scan_pci_bus(new_bus, sysinfo);
- #else
- new_bus = scan_pci_bus(new_bus);
- #endif
- /* set real max bus num in that */
-
- buses = (buses & 0xff00ffff) |
- ((unsigned int) (new_bus & 0xff) << 16);
- pci_write_config32(dev, PCI_PRIMARY_BUS, buses);
-
- pci_write_config16(dev, PCI_COMMAND, cr);
-
- break;
- default:
- bad:
- ;
- }
-
- /* if this is not a multi function device,
- * or the device is not present don't waste
- * time probing another function.
- * Skip to next device.
- */
- if ( ((devfn & 0x07) == 0x00) && ((hdr_type & 0x80) != 0x80))
- {
- devfn += 0x07;
- }
- }
-
- return new_bus;
-}
-#endif
-#if RAMINIT_SYSINFO == 1
+#if CONFIG_RAMINIT_SYSINFO
static void ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned offset_unitid, struct sys_info *sysinfo)
#else
static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned offset_unitid)
#endif
{
- //even HT_CHAIN_UNITID_BASE == 0, we still can go through this function, because of end_of_chain check, also We need it to optimize link
+ //even CONFIG_HT_CHAIN_UNITID_BASE == 0, we still can go through this function, because of end_of_chain check, also We need it to optimize link
uint8_t next_unitid, last_unitid;
unsigned uoffs;
-#if RAMINIT_SYSINFO == 0
+#if !CONFIG_RAMINIT_SYSINFO
int reset_needed = 0;
#endif
-#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE
- //let't record the device of last ht device, So we can set the Unitid to HT_CHAIN_END_UNITID_BASE
- unsigned real_last_unitid;
- uint8_t real_last_pos;
+#if CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20
+ //let't record the device of last ht device, So we can set the Unitid to CONFIG_HT_CHAIN_END_UNITID_BASE
+ unsigned real_last_unitid;
+ uint8_t real_last_pos;
int ht_dev_num = 0;
+ uint8_t end_used = 0;
#endif
uoffs = PCI_HT_HOST_OFFS;
- next_unitid = (offset_unitid) ? HT_CHAIN_UNITID_BASE:1;
+ next_unitid = (offset_unitid) ? CONFIG_HT_CHAIN_UNITID_BASE:1;
do {
uint32_t id;
uint16_t flags, ctrl;
uint8_t count;
unsigned offs;
-
+
/* Wait until the link initialization is complete */
do {
ctrl = pci_read_config16(udev, upos + LINK_CTRL(uoffs));
/* Is this the end of the hypertransport chain? */
if (ctrl & (1 << 6)) {
- goto end_of_chain;
+ goto end_of_chain;
}
if (ctrl & ((1 << 4) | (1 << 8))) {
- /*
- * Either the link has failed, or we have
- * a CRC error.
- * Sometimes this can happen due to link
- * retrain, so lets knock it down and see
- * if its transient
- */
- ctrl |= ((1 << 6) | (1 <<8)); // Link fail + Crc
- pci_write_config16(udev, upos + LINK_CTRL(uoffs), ctrl);
- ctrl = pci_read_config16(udev, upos + LINK_CTRL(uoffs));
- if (ctrl & ((1 << 4) | (1 << 8))) {
- print_err("Detected error on Hypertransport Link\n");
+ /*
+ * Either the link has failed, or we have
+ * a CRC error.
+ * Sometimes this can happen due to link
+ * retrain, so lets knock it down and see
+ * if its transient
+ */
+ ctrl |= ((1 << 4) | (1 <<8)); // Link fail + Crc
+ pci_write_config16(udev, upos + LINK_CTRL(uoffs), ctrl);
+ ctrl = pci_read_config16(udev, upos + LINK_CTRL(uoffs));
+ if (ctrl & ((1 << 4) | (1 << 8))) {
+ print_err("Detected error on Hypertransport Link\n");
break;
- }
+ }
}
} while((ctrl & (1 << 5)) == 0);
-
+
device_t dev = PCI_DEV(bus, 0, 0);
last_unitid = next_unitid;
id = pci_read_config32(dev, PCI_VENDOR_ID);
/* If the chain is enumerated quit */
- if ( (id == 0xffffffff) || (id == 0x00000000) ||
- (id == 0x0000ffff) || (id == 0xffff0000))
+ if ((id == 0xffffffff) || (id == 0x00000000) ||
+ (id == 0x0000ffff) || (id == 0xffff0000))
{
break;
}
pos = ht_lookup_slave_capability(dev);
if (!pos) {
- print_err("udev="); print_err_hex32(udev);
- print_err("\tupos="); print_err_hex32(upos);
- print_err("\tuoffs="); print_err_hex32(uoffs);
- print_err("\tHT link capability not found\r\n");
+ print_err("udev="); print_err_hex32(udev);
+ print_err("\tupos="); print_err_hex32(upos);
+ print_err("\tuoffs="); print_err_hex32(uoffs);
+ print_err("\tHT link capability not found\n");
break;
}
-#if CK804_DEVN_BASE==0
- //CK804 workaround:
- // CK804 UnitID changes not use
- id = pci_read_config32(dev, PCI_VENDOR_ID);
- if(id != 0x005e10de) {
-#endif
+#if CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20
+ if(offset_unitid) {
+ if(next_unitid>= (bus ? 0x20:0x18) ) {
+ if(!end_used) {
+ next_unitid = CONFIG_HT_CHAIN_END_UNITID_BASE;
+ end_used = 1;
+ } else {
+ goto out;
+ }
+
+ }
+ real_last_pos = pos;
+ real_last_unitid = next_unitid;
+ ht_dev_num++;
+ }
+#endif
/* Update the Unitid of the current device */
flags = pci_read_config16(dev, pos + PCI_CAP_FLAGS);
- flags &= ~0x1f; /* mask out the bse Unit ID */
+ flags &= ~0x1f; /* mask out the base Unit ID */
flags |= next_unitid & 0x1f;
pci_write_config16(dev, pos + PCI_CAP_FLAGS, flags);
+ /* Compute the number of unitids consumed */
+ count = (flags >> 5) & 0x1f;
+
/* Note the change in device number */
dev = PCI_DEV(bus, next_unitid, 0);
-#if CK804_DEVN_BASE==0
- }
- else {
- dev = PCI_DEV(bus, 0, 0);
- }
-#endif
- /* Compute the number of unitids consumed */
- count = (flags >> 5) & 0x1f;
-#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE
- if(offset_unitid) {
- real_last_unitid = next_unitid;
- real_last_pos = pos;
- ht_dev_num++;
- }
-#endif
-
- next_unitid += count;
+ next_unitid += count;
/* Find which side of the ht link we are on,
* by reading which direction our last write to PCI_CAP_FLAGS
* came from.
*/
flags = pci_read_config16(dev, pos + PCI_CAP_FLAGS);
- offs = ((flags>>10) & 1) ? PCI_HT_SLAVE1_OFFS : PCI_HT_SLAVE0_OFFS;
-
- #if RAMINIT_SYSINFO == 1
- /* store the link pair here and we will Setup the Hypertransport link later, after we get final FID/VID */
+ offs = ((flags>>10) & 1) ? PCI_HT_SLAVE1_OFFS : PCI_HT_SLAVE0_OFFS;
+
+ #if CONFIG_RAMINIT_SYSINFO
+ /* store the link pair here and we will Setup the Hypertransport link later, after we get final FID/VID */
{
struct link_pair_st *link_pair = &sysinfo->link_pair[sysinfo->link_pair_num];
link_pair->udev = udev;
reset_needed |= ht_optimize_link(udev, upos, uoffs, dev, pos, offs);
#endif
-#if CK804_DEVN_BASE==0
- if(id == 0x005e10de) {
- break;
- }
-#endif
-
/* Remeber the location of the last device */
udev = dev;
upos = pos;
uoffs = ( offs != PCI_HT_SLAVE0_OFFS ) ? PCI_HT_SLAVE0_OFFS : PCI_HT_SLAVE1_OFFS;
- } while((last_unitid != next_unitid) && (next_unitid <= 0x1f));
+ } while (last_unitid != next_unitid );
+#if CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20
+out:
+#endif
end_of_chain: ;
-
-#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE
- if(offset_unitid && (ht_dev_num>0) ) {
- uint16_t flags;
- int i;
- flags = pci_read_config16(PCI_DEV(bus,real_last_unitid,0), real_last_pos + PCI_CAP_FLAGS);
- flags &= ~0x1f;
- flags |= HT_CHAIN_END_UNITID_BASE & 0x1f;
- pci_write_config16(PCI_DEV(bus, real_last_unitid, 0), real_last_pos + PCI_CAP_FLAGS, flags);
- #if RAMINIT_SYSINFO == 1
+#if CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20
+ if(offset_unitid && (ht_dev_num>1) && (real_last_unitid != CONFIG_HT_CHAIN_END_UNITID_BASE) && !end_used ) {
+ uint16_t flags;
+ flags = pci_read_config16(PCI_DEV(bus,real_last_unitid,0), real_last_pos + PCI_CAP_FLAGS);
+ flags &= ~0x1f;
+ flags |= CONFIG_HT_CHAIN_END_UNITID_BASE & 0x1f;
+ pci_write_config16(PCI_DEV(bus, real_last_unitid, 0), real_last_pos + PCI_CAP_FLAGS, flags);
+
+ #if CONFIG_RAMINIT_SYSINFO
// Here need to change the dev in the array
+ int i;
for(i=0;i<sysinfo->link_pair_num;i++)
- {
- struct link_pair_st *link_pair = &sysinfo->link_pair[i];
- if(link_pair->udev == PCI_DEV(bus, real_last_unitid, 0)) {
- link_pair->udev = PCI_DEV(bus, HT_CHAIN_END_UNITID_BASE, 0);
+ {
+ struct link_pair_st *link_pair = &sysinfo->link_pair[i];
+ if(link_pair->udev == PCI_DEV(bus, real_last_unitid, 0)) {
+ link_pair->udev = PCI_DEV(bus, CONFIG_HT_CHAIN_END_UNITID_BASE, 0);
continue;
}
- if(link_pair->dev == PCI_DEV(bus, real_last_unitid, 0)) {
- link_pair->dev = PCI_DEV(bus, HT_CHAIN_END_UNITID_BASE, 0);
- }
- }
+ if(link_pair->dev == PCI_DEV(bus, real_last_unitid, 0)) {
+ link_pair->dev = PCI_DEV(bus, CONFIG_HT_CHAIN_END_UNITID_BASE, 0);
+ }
+ }
#endif
- }
+ }
#endif
-#if RAMINIT_SYSINFO == 0
+#if !CONFIG_RAMINIT_SYSINFO
return reset_needed;
#endif
}
-#if RAMINIT_SYSINFO == 1
+#if 0
+#if CONFIG_RAMINIT_SYSINFO
static void ht_setup_chain(device_t udev, unsigned upos, struct sys_info *sysinfo)
#else
static int ht_setup_chain(device_t udev, unsigned upos)
#endif
{
unsigned offset_unitid = 0;
-#if HT_CHAIN_UNITID_BASE != 1
- offset_unitid = 1;
+#if ((CONFIG_HT_CHAIN_UNITID_BASE != 1) || (CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20))
+ offset_unitid = 1;
#endif
- /* Assumption the HT chain that is bus 0 has the HT I/O Hub on it.
- * On most boards this just happens. If a cpu has multiple
- * non Coherent links the appropriate bus registers for the
- * links needs to be programed to point at bus 0.
- */
+ /* Assumption the HT chain that is bus 0 has the HT I/O Hub on it.
+ * On most boards this just happens. If a cpu has multiple
+ * non Coherent links the appropriate bus registers for the
+ * links needs to be programed to point at bus 0.
+ */
- /* Make certain the HT bus is not enumerated */
- ht_collapse_previous_enumeration(0, 0);
+ /* Make certain the HT bus is not enumerated */
+ ht_collapse_previous_enumeration(0, 0);
-#if HT_CHAIN_UNITID_BASE != 1
- offset_unitid = 1;
+#if ((CONFIG_HT_CHAIN_UNITID_BASE != 1) || (CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20))
+ offset_unitid = 1;
#endif
-#if RAMINIT_SYSINFO == 1
+#if CONFIG_RAMINIT_SYSINFO
ht_setup_chainx(udev, upos, 0, offset_unitid, sysinfo);
#else
- return ht_setup_chainx(udev, upos, 0, offset_unitid);
+ return ht_setup_chainx(udev, upos, 0, offset_unitid);
#endif
}
+#endif
+
static int optimize_link_read_pointer(uint8_t node, uint8_t linkn, uint8_t linkt, uint8_t val)
{
uint32_t dword, dword_old;
uint8_t link_type;
-
+
/* This works on an Athlon64 because unimplemented links return 0 */
dword = pci_read_config32(PCI_DEV(0,0x18+node,0), 0x98 + (linkn * 0x20));
link_type = dword & 0xff;
-
- dword_old = dword = pci_read_config32(PCI_DEV(0,0x18+node,3), 0xdc);
-
+
+
if ( (link_type & 7) == linkt ) { /* Coherent Link only linkt = 3, ncoherent = 7*/
+ dword_old = dword = pci_read_config32(PCI_DEV(0,0x18+node,3), 0xdc);
dword &= ~( 0xff<<(linkn *8) );
dword |= val << (linkn *8);
+
+ if (dword != dword_old) {
+ pci_write_config32(PCI_DEV(0,0x18+node,3), 0xdc, dword);
+ return 1;
+ }
}
-
- if (dword != dword_old) {
- pci_write_config32(PCI_DEV(0,0x18+node,3), 0xdc, dword);
- return 1;
- }
-
+
return 0;
}
static int optimize_link_read_pointers_chain(uint8_t ht_c_num)
{
- int reset_needed;
+ int reset_needed;
uint8_t i;
reset_needed = 0;
uint8_t nodeid, linkn;
uint8_t busn;
uint8_t val;
+ unsigned devn = 1;
+
+ #if ((CONFIG_HT_CHAIN_UNITID_BASE != 1) || (CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20))
+ #if CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY == 1
+ if(i==0) // to check if it is sb ht chain
+ #endif
+ devn = CONFIG_HT_CHAIN_UNITID_BASE;
+ #endif
reg = pci_read_config32(PCI_DEV(0,0x18,1), 0xe0 + i * 4);
-
+
nodeid = ((reg & 0xf0)>>4); // nodeid
linkn = ((reg & 0xf00)>>8); // link n
busn = (reg & 0xff0000)>>16; //busn
-
- reg = pci_read_config32( PCI_DEV(busn, 1, 0), PCI_VENDOR_ID);
+
+ reg = pci_read_config32( PCI_DEV(busn, devn, 0), PCI_VENDOR_ID); // ? the chain dev maybe offseted
if ( (reg & 0xffff) == PCI_VENDOR_ID_AMD) {
val = 0x25;
} else if ( (reg & 0xffff) == PCI_VENDOR_ID_NVIDIA ) {
return reset_needed;
}
-#if RAMINIT_SYSINFO == 1
+#if CONFIG_SOUTHBRIDGE_NVIDIA_CK804 // || CONFIG_SOUTHBRIDGE_NVIDIA_MCP55
+static int set_ht_link_buffer_count(uint8_t node, uint8_t linkn, uint8_t linkt, unsigned val)
+{
+ uint32_t dword;
+ uint8_t link_type;
+ unsigned regpos;
+ device_t dev;
+
+ /* This works on an Athlon64 because unimplemented links return 0 */
+ regpos = 0x98 + (linkn * 0x20);
+ dev = PCI_DEV(0,0x18+node,0);
+ dword = pci_read_config32(dev, regpos);
+ link_type = dword & 0xff;
+
+ if ( (link_type & 0x7) == linkt ) { /* Coherent Link only linkt = 3, ncoherent = 7*/
+ regpos = 0x90 + (linkn * 0x20);
+ dword = pci_read_config32(dev, regpos );
+
+ if (dword != val) {
+ pci_write_config32(dev, regpos, val);
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+static int set_ht_link_buffer_counts_chain(uint8_t ht_c_num, unsigned vendorid, unsigned val)
+{
+ int reset_needed;
+ uint8_t i;
+
+ reset_needed = 0;
+
+ for (i = 0; i < ht_c_num; i++) {
+ uint32_t reg;
+ uint8_t nodeid, linkn;
+ uint8_t busn;
+ unsigned devn;
+
+ reg = pci_read_config32(PCI_DEV(0,0x18,1), 0xe0 + i * 4);
+ if((reg & 3) != 3) continue; // not enabled
+
+ nodeid = ((reg & 0xf0)>>4); // nodeid
+ linkn = ((reg & 0xf00)>>8); // link n
+ busn = (reg & 0xff0000)>>16; //busn
+
+ for(devn = 0; devn < 0x20; devn++) {
+ reg = pci_read_config32( PCI_DEV(busn, devn, 0), PCI_VENDOR_ID); //1?
+ if ( (reg & 0xffff) == vendorid ) {
+ reset_needed |= set_ht_link_buffer_count(nodeid, linkn, 0x07,val);
+ break;
+ }
+ }
+ }
+
+ return reset_needed;
+}
+#endif
+
+#if CONFIG_RAMINIT_SYSINFO
static void ht_setup_chains(uint8_t ht_c_num, struct sys_info *sysinfo)
#else
static int ht_setup_chains(uint8_t ht_c_num)
#endif
{
- /* Assumption the HT chain that is bus 0 has the HT I/O Hub on it.
+ /* Assumption the HT chain that is bus 0 has the HT I/O Hub on it.
* On most boards this just happens. If a cpu has multiple
* non Coherent links the appropriate bus registers for the
* links needs to be programed to point at bus 0.
*/
- uint8_t upos;
- device_t udev;
+ uint8_t upos;
+ device_t udev;
uint8_t i;
-#if RAMINIT_SYSINFO == 0
+#if !CONFIG_RAMINIT_SYSINFO
int reset_needed = 0;
#else
sysinfo->link_pair_num = 0;
unsigned regpos;
uint32_t dword;
uint8_t busn;
- #if (USE_DCACHE_RAM == 1) && (K8_SCAN_PCI_BUS == 1)
- unsigned bus;
- #endif
unsigned offset_unitid = 0;
-
+
reg = pci_read_config32(PCI_DEV(0,0x18,1), 0xe0 + i * 4);
//We need setup 0x94, 0xb4, and 0xd4 according to the reg
devpos = ((reg & 0xf0)>>4)+0x18; // nodeid; it will decide 0x18 or 0x19
regpos = ((reg & 0xf00)>>8) * 0x20 + 0x94; // link n; it will decide 0x94 or 0xb4, 0x0xd4;
busn = (reg & 0xff0000)>>16;
-
+
dword = pci_read_config32( PCI_DEV(0, devpos, 0), regpos) ;
dword &= ~(0xffff<<8);
dword |= (reg & 0xffff0000)>>8;
pci_write_config32( PCI_DEV(0, devpos,0), regpos , dword);
-
-
- #if HT_CHAIN_UNITID_BASE != 1
- #if SB_HT_CHAIN_UNITID_OFFSET_ONLY == 1
- if(i==0) // to check if it is sb ht chain
- #endif
- offset_unitid = 1;
- #endif
-
- /* Make certain the HT bus is not enumerated */
- ht_collapse_previous_enumeration(busn, offset_unitid);
+
+
+ #if ((CONFIG_HT_CHAIN_UNITID_BASE != 1) || (CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20))
+ #if CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY == 1
+ if(i==0) // to check if it is sb ht chain
+ #endif
+ offset_unitid = 1;
+ #endif
+
+ /* Make certain the HT bus is not enumerated */
+ ht_collapse_previous_enumeration(busn, offset_unitid);
upos = ((reg & 0xf00)>>8) * 0x20 + 0x80;
udev = PCI_DEV(0, devpos, 0);
-#if RAMINIT_SYSINFO == 1
+#if CONFIG_RAMINIT_SYSINFO
ht_setup_chainx(udev,upos,busn, offset_unitid, sysinfo); // all not
#else
reset_needed |= ht_setup_chainx(udev,upos,busn, offset_unitid); //all not
#endif
- #if (USE_DCACHE_RAM == 1) && (K8_SCAN_PCI_BUS == 1)
- /* You can use use this in romcc, because there is function call in romcc, recursive will kill you */
- bus = busn; // we need 32 bit
-#if RAMINIT_SYSINFO == 1
- scan_pci_bus(bus, sysinfo);
-#else
- reset_needed |= (scan_pci_bus(bus)>>16); // take out reset_needed that stored in upword
-#endif
- #endif
}
-#if RAMINIT_SYSINFO == 0
+#if !CONFIG_RAMINIT_SYSINFO
reset_needed |= optimize_link_read_pointers_chain(ht_c_num);
return reset_needed;
}
-static inline unsigned get_nodes(void)
-{
- return ((pci_read_config32(PCI_DEV(0, 0x18, 0), 0x60)>>4) & 7) + 1;
-}
-
+#if defined (__GNUC__)
+static inline unsigned get_nodes(void);
+#endif
-#if RAMINIT_SYSINFO == 1
+#if CONFIG_RAMINIT_SYSINFO
static void ht_setup_chains_x(struct sys_info *sysinfo)
#else
static int ht_setup_chains_x(void)
#endif
-{
- uint8_t nodeid;
- uint32_t reg;
+{
+ uint8_t nodeid;
+ uint32_t reg;
uint32_t tempreg;
- uint8_t next_busn;
- uint8_t ht_c_num;
+ uint8_t next_busn;
+ uint8_t ht_c_num;
uint8_t nodes;
-#if K8_ALLOCATE_IO_RANGE == 1
+#if CONFIG_K8_ALLOCATE_IO_RANGE
unsigned next_io_base;
#endif
- nodes = get_nodes();
-
- /* read PCI_DEV(0,0x18,0) 0x64 bit [8:9] to find out SbLink m */
- reg = pci_read_config32(PCI_DEV(0, 0x18, 0), 0x64);
- /* update PCI_DEV(0, 0x18, 1) 0xe0 to 0x05000m03, and next_busn=0x3f+1 */
+ nodes = get_nodes();
+
+ /* read PCI_DEV(0,0x18,0) 0x64 bit [8:9] to find out SbLink m */
+ reg = pci_read_config32(PCI_DEV(0, 0x18, 0), 0x64);
+ /* update PCI_DEV(0, 0x18, 1) 0xe0 to 0x05000m03, and next_busn=0x3f+1 */
print_linkn_in("SBLink=", ((reg>>8) & 3) );
-#if RAMINIT_SYSINFO == 1
- sysinfo->sblnk = (reg>>8) & 3;
+#if CONFIG_RAMINIT_SYSINFO
+ sysinfo->sblk = (reg>>8) & 3;
sysinfo->sbbusn = 0;
sysinfo->nodes = nodes;
#endif
- tempreg = 3 | ( 0<<4) | (((reg>>8) & 3)<<8) | (0<<16)| (0x3f<<24);
- pci_write_config32(PCI_DEV(0, 0x18, 1), 0xe0, tempreg);
+ tempreg = 3 | ( 0<<4) | (((reg>>8) & 3)<<8) | (0<<16)| (0x3f<<24);
+ pci_write_config32(PCI_DEV(0, 0x18, 1), 0xe0, tempreg);
next_busn=0x3f+1; /* 0 will be used ht chain with SB we need to keep SB in bus0 in auto stage*/
-#if K8_ALLOCATE_IO_RANGE == 1
+#if CONFIG_K8_ALLOCATE_IO_RANGE
/* io range allocation */
tempreg = 0 | (((reg>>8) & 0x3) << 4 )| (0x3<<12); //limit
pci_write_config32(PCI_DEV(0, 0x18, 1), 0xC4, tempreg);
#endif
/* clean others */
- for(ht_c_num=1;ht_c_num<4; ht_c_num++) {
- pci_write_config32(PCI_DEV(0, 0x18, 1), 0xe0 + ht_c_num * 4, 0);
+ for(ht_c_num=1;ht_c_num<4; ht_c_num++) {
+ pci_write_config32(PCI_DEV(0, 0x18, 1), 0xe0 + ht_c_num * 4, 0);
+
+#if CONFIG_K8_ALLOCATE_IO_RANGE
/* io range allocation */
pci_write_config32(PCI_DEV(0, 0x18, 1), 0xc4 + ht_c_num * 8, 0);
pci_write_config32(PCI_DEV(0, 0x18, 1), 0xc0 + ht_c_num * 8, 0);
- }
-
- for(nodeid=0; nodeid<nodes; nodeid++) {
- device_t dev;
- uint8_t linkn;
- dev = PCI_DEV(0, 0x18+nodeid,0);
- for(linkn = 0; linkn<3; linkn++) {
- unsigned regpos;
- regpos = 0x98 + 0x20 * linkn;
- reg = pci_read_config32(dev, regpos);
- if ((reg & 0x17) != 7) continue; /* it is not non conherent or not connected*/
+#endif
+ }
+
+ for(nodeid=0; nodeid<nodes; nodeid++) {
+ device_t dev;
+ uint8_t linkn;
+ dev = PCI_DEV(0, 0x18+nodeid,0);
+ for(linkn = 0; linkn<3; linkn++) {
+ unsigned regpos;
+ regpos = 0x98 + 0x20 * linkn;
+ reg = pci_read_config32(dev, regpos);
+ if ((reg & 0x17) != 7) continue; /* it is not non conherent or not connected*/
print_linkn_in("NC node|link=", ((nodeid & 0xf)<<4)|(linkn & 0xf));
- tempreg = 3 | (nodeid <<4) | (linkn<<8);
- /*compare (temp & 0xffff), with (PCI(0, 0x18, 1) 0xe0 to 0xec & 0xfffff) */
- for(ht_c_num=0;ht_c_num<4; ht_c_num++) {
- reg = pci_read_config32(PCI_DEV(0, 0x18, 1), 0xe0 + ht_c_num * 4);
- if(((reg & 0xffff) == (tempreg & 0xffff)) || ((reg & 0xffff) == 0x0000)) { /*we got it*/
- break;
- }
- }
- if(ht_c_num == 4) break; /*used up only 4 non conherent allowed*/
- /*update to 0xe0...*/
+ tempreg = 3 | (nodeid <<4) | (linkn<<8);
+ /*compare (temp & 0xffff), with (PCI(0, 0x18, 1) 0xe0 to 0xec & 0xfffff) */
+ for(ht_c_num=0;ht_c_num<4; ht_c_num++) {
+ reg = pci_read_config32(PCI_DEV(0, 0x18, 1), 0xe0 + ht_c_num * 4);
+ if(((reg & 0xffff) == (tempreg & 0xffff)) || ((reg & 0xffff) == 0x0000)) { /*we got it*/
+ break;
+ }
+ }
+ if(ht_c_num == 4) break; /*used up only 4 non conherent allowed*/
+ /*update to 0xe0...*/
if((reg & 0xf) == 3) continue; /*SbLink so don't touch it */
print_linkn_in("\tbusn=", next_busn);
- tempreg |= (next_busn<<16)|((next_busn+0x3f)<<24);
- pci_write_config32(PCI_DEV(0, 0x18, 1), 0xe0 + ht_c_num * 4, tempreg);
+ tempreg |= (next_busn<<16)|((next_busn+0x3f)<<24);
+ pci_write_config32(PCI_DEV(0, 0x18, 1), 0xe0 + ht_c_num * 4, tempreg);
next_busn+=0x3f+1;
-#if K8_ALLOCATE_IO_RANGE == 1
+#if CONFIG_K8_ALLOCATE_IO_RANGE
/* io range allocation */
- tempreg = nodeid | (linkn<<4) | ((next_io_base+0x3)<<12); //limit
- pci_write_config32(PCI_DEV(0, 0x18, 1), 0xC4 + ht_c_num * 8, tempreg);
- tempreg = 3 /*| ( 3<<4)*/ | (next_io_base<<12); //base :ISA and VGA ?
- pci_write_config32(PCI_DEV(0, 0x18, 1), 0xC0 + ht_c_num * 8, tempreg);
- next_io_base += 0x3+0x1;
+ tempreg = nodeid | (linkn<<4) | ((next_io_base+0x3)<<12); //limit
+ pci_write_config32(PCI_DEV(0, 0x18, 1), 0xC4 + ht_c_num * 8, tempreg);
+ tempreg = 3 /*| ( 3<<4)*/ | (next_io_base<<12); //base :ISA and VGA ?
+ pci_write_config32(PCI_DEV(0, 0x18, 1), 0xC0 + ht_c_num * 8, tempreg);
+ next_io_base += 0x3+0x1;
#endif
- }
- }
- /*update 0xe0, 0xe4, 0xe8, 0xec from PCI_DEV(0, 0x18,1) to PCI_DEV(0, 0x19,1) to PCI_DEV(0, 0x1f,1);*/
-
- for(nodeid = 1; nodeid<nodes; nodeid++) {
- int i;
- device_t dev;
- dev = PCI_DEV(0, 0x18+nodeid,1);
- for(i = 0; i< 4; i++) {
- unsigned regpos;
- regpos = 0xe0 + i * 4;
- reg = pci_read_config32(PCI_DEV(0, 0x18, 1), regpos);
- pci_write_config32(dev, regpos, reg);
- }
-
-#if K8_ALLOCATE_IO_RANGE == 1
+ }
+ }
+ /*update 0xe0, 0xe4, 0xe8, 0xec from PCI_DEV(0, 0x18,1) to PCI_DEV(0, 0x19,1) to PCI_DEV(0, 0x1f,1);*/
+
+ for(nodeid = 1; nodeid<nodes; nodeid++) {
+ int i;
+ device_t dev;
+ dev = PCI_DEV(0, 0x18+nodeid,1);
+ for(i = 0; i< 4; i++) {
+ unsigned regpos;
+ regpos = 0xe0 + i * 4;
+ reg = pci_read_config32(PCI_DEV(0, 0x18, 1), regpos);
+ pci_write_config32(dev, regpos, reg);
+ }
+
+#if CONFIG_K8_ALLOCATE_IO_RANGE
/* io range allocation */
- for(i = 0; i< 4; i++) {
- unsigned regpos;
- regpos = 0xc4 + i * 8;
- reg = pci_read_config32(PCI_DEV(0, 0x18, 1), regpos);
- pci_write_config32(dev, regpos, reg);
- }
- for(i = 0; i< 4; i++) {
- unsigned regpos;
- regpos = 0xc0 + i * 8;
- reg = pci_read_config32(PCI_DEV(0, 0x18, 1), regpos);
- pci_write_config32(dev, regpos, reg);
- }
+ for(i = 0; i< 4; i++) {
+ unsigned regpos;
+ regpos = 0xc4 + i * 8;
+ reg = pci_read_config32(PCI_DEV(0, 0x18, 1), regpos);
+ pci_write_config32(dev, regpos, reg);
+ }
+ for(i = 0; i< 4; i++) {
+ unsigned regpos;
+ regpos = 0xc0 + i * 8;
+ reg = pci_read_config32(PCI_DEV(0, 0x18, 1), regpos);
+ pci_write_config32(dev, regpos, reg);
+ }
#endif
- }
-
+ }
+
/* recount ht_c_num*/
uint8_t i=0;
- for(ht_c_num=0;ht_c_num<4; ht_c_num++) {
+ for(ht_c_num=0;ht_c_num<4; ht_c_num++) {
reg = pci_read_config32(PCI_DEV(0, 0x18, 1), 0xe0 + ht_c_num * 4);
- if(((reg & 0xf) != 0x0)) {
+ if(((reg & 0xf) != 0x0)) {
i++;
}
- }
+ }
-#if RAMINIT_SYSINFO == 1
+#if CONFIG_RAMINIT_SYSINFO
sysinfo->ht_c_num = i;
- ht_setup_chains(i, sysinfo);
+ ht_setup_chains(i, sysinfo);
+ sysinfo->sbdn = get_sbdn(sysinfo->sbbusn);
#else
return ht_setup_chains(i);
#endif
}
-#if RAMINIT_SYSINFO == 1
+#if CONFIG_RAMINIT_SYSINFO
static int optimize_link_incoherent_ht(struct sys_info *sysinfo)
{
// We need to use recorded link pair info to optimize the link
int i;
int reset_needed = 0;
-
+
unsigned link_pair_num = sysinfo->link_pair_num;
- for(i=0; i< link_pair_num; i++) {
+ printk(BIOS_SPEW, "entering optimize_link_incoherent_ht\n");
+ printk(BIOS_SPEW, "sysinfo->link_pair_num=0x%x\n", link_pair_num);
+ for(i=0; i< link_pair_num; i++) {
struct link_pair_st *link_pair= &sysinfo->link_pair[i];
reset_needed |= ht_optimize_link(link_pair->udev, link_pair->upos, link_pair->uoffs, link_pair->dev, link_pair->pos, link_pair->offs);
+ printk(BIOS_SPEW, "after ht_optimize_link for link pair %d, reset_needed=0x%x\n", i, reset_needed);
}
- reset_needed |= optimize_link_read_pointers(sysinfo->ht_c_num);
+ reset_needed |= optimize_link_read_pointers_chain(sysinfo->ht_c_num);
+ printk(BIOS_SPEW, "after optimize_link_read_pointers_chain, reset_needed=0x%x\n", reset_needed);
return reset_needed;
#endif
-static unsigned get_sblnk(void)
-{
- uint32_t reg;
- /* read PCI_DEV(0,0x18,0) 0x64 bit [8:9] to find out SbLink m */
- reg = pci_read_config32(PCI_DEV(0, 0x18, 0), 0x64);
- return ((reg>>8) & 3) ;
-}
-
-/* Look up a which bus a given node/link combination is on.
- * return 0 when we can't find the answer.
- */
-static unsigned node_link_to_bus(unsigned node, unsigned link)
-{
- unsigned reg;
-
- for(reg = 0xE0; reg < 0xF0; reg += 0x04) {
- unsigned config_map;
- config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg);
- if ((config_map & 3) != 3) {
- continue;
- }
- if ((((config_map >> 4) & 7) == node) &&
- (((config_map >> 8) & 3) == link))
- {
- return (config_map >> 16) & 0xff;
- }
- }
- return 0;
-}