amdfam10: add phenom II as known cpu

[coreboot.git] / src / northbridge / amd / Kconfig

diff --git a/src/northbridge/amd/Kconfig b/src/northbridge/amd/Kconfig
index 25c4b081bc374a16c5fb6adb0d459603cf167ea2..33e19c2a9ff0edfc4d81cb14b07c4e62dc5e36b2 100644 (file)
--- a/src/northbridge/amd/Kconfig
+++ b/src/northbridge/amd/Kconfig
@@ -3,3 +3,98 @@ source src/northbridge/amd/gx1/Kconfig
 source src/northbridge/amd/gx2/Kconfig
 source src/northbridge/amd/amdfam10/Kconfig
 source src/northbridge/amd/lx/Kconfig
+source src/northbridge/amd/agesa/Kconfig
+source src/northbridge/amd/cimx/Kconfig
+menu "HyperTransport setup"
+       #could be implemented for K8 (NORTHBRIDGE_AMD_AMDK8)
+       depends on (NORTHBRIDGE_AMD_AMDFAM10) && EXPERT
+
+choice
+       prompt "HyperTransport frequency"
+       default LIMIT_HT_SPEED_AUTO
+       help
+         This option sets the maximum permissible HyperTransport link
+         frequency.
+
+         Use of this option will only limit the autodetected HT frequency.
+         It will not (and cannot) increase the frequency beyond the
+         autodetected limits.
+
+         This is primarily used to work around poorly designed or laid out
+         HT traces on certain motherboards.
+
+config LIMIT_HT_SPEED_200
+       bool "Limit HT frequency to 200MHz"
+config LIMIT_HT_SPEED_300
+       bool "Limit HT frequency to 300MHz"
+config LIMIT_HT_SPEED_400
+       bool "Limit HT frequency to 400MHz"
+config LIMIT_HT_SPEED_500
+       bool "Limit HT frequency to 500MHz"
+config LIMIT_HT_SPEED_600
+       bool "Limit HT frequency to 600MHz"
+config LIMIT_HT_SPEED_800
+       bool "Limit HT frequency to 800MHz"
+config LIMIT_HT_SPEED_1000
+       bool "Limit HT frequency to 1.0GHz"
+config LIMIT_HT_SPEED_1200
+       bool "Limit HT frequency to 1.2GHz"
+config LIMIT_HT_SPEED_1400
+       bool "Limit HT frequency to 1.4GHz"
+config LIMIT_HT_SPEED_1600
+       bool "Limit HT frequency to 1.6GHz"
+config LIMIT_HT_SPEED_1800
+       bool "Limit HT frequency to 1.8GHz"
+config LIMIT_HT_SPEED_2000
+       bool "Limit HT frequency to 2.0GHz"
+config LIMIT_HT_SPEED_2200
+       bool "Limit HT frequency to 2.2GHz"
+config LIMIT_HT_SPEED_2400
+       bool "Limit HT frequency to 2.4GHz"
+config LIMIT_HT_SPEED_2600
+       bool "Limit HT frequency to 2.6GHz"
+config LIMIT_HT_SPEED_AUTO
+       bool "Autodetect HT frequency"
+endchoice
+
+choice
+       prompt "HyperTransport downlink width"
+       default LIMIT_HT_DOWN_WIDTH_16
+       help
+         This option sets the maximum permissible HyperTransport
+         downlink width.
+
+         Use of this option will only limit the autodetected HT width.
+         It will not (and cannot) increase the width beyond the autodetected
+         limits.
+
+         This is primarily used to work around poorly designed or laid out HT
+         traces on certain motherboards.
+
+config LIMIT_HT_DOWN_WIDTH_8
+       bool "8 bits"
+config LIMIT_HT_DOWN_WIDTH_16
+       bool "16 bits"
+endchoice
+
+choice
+       prompt "HyperTransport uplink width"
+       default LIMIT_HT_UP_WIDTH_16
+       help
+         This option sets the maximum permissible HyperTransport
+         uplink width.
+
+         Use of this option will only limit the autodetected HT width.
+         It will not (and cannot) increase the width beyond the autodetected
+         limits.
+
+         This is primarily used to work around poorly designed or laid out HT
+         traces on certain motherboards.
+
+config LIMIT_HT_UP_WIDTH_8
+       bool "8 bits"
+config LIMIT_HT_UP_WIDTH_16
+       bool "16 bits"
+endchoice
+
+endmenu