-
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
-
#include <arch/io.h>
-#include <device/chip.h>
#include "chip.h"
+#include "vgachip.h"
-static int
-mainboard_scan_bus(device_t root, int maxbus)
-{
- int retval;
- printk_spew("%s: root %p maxbus %d\n", __FUNCTION__, root, maxbus);
- retval = pci_scan_bus(root->bus, 0, 0xff, maxbus);
- printk_spew("DONE %s: return %d\n", __FUNCTION__, maxbus);
- return maxbus;
-}
+void vga_enable_console();
-static struct device_operations mainboard_operations = {
- .read_resources = root_dev_read_resources,
- .set_resources = root_dev_set_resources,
- .enable_resources = enable_childrens_resources,
- .init = 0,
- .scan_bus = mainboard_scan_bus,
- .enable = 0,
-};
-static void enumerate(struct chip *chip)
+static void vga_fixup(void) {
+ // we do this right here because:
+ // - all the hardware is working, and some VGA bioses seem to need
+ // that
+ // - we need page 0 below for coreboot tables.
+
+ printk(BIOS_DEBUG, "INSTALL REAL-MODE IDT\n");
+ setup_realmode_idt();
+ printk(BIOS_DEBUG, "DO THE VGA BIOS\n");
+ do_vgabios();
+ post_code(0x93);
+ vga_enable_console();
+
+
+}
+
+void write_protect_vgabios(void)
{
- struct chip *child;
- dev_root.ops = &mainboard_operations;
- chip->dev = &dev_root;
- chip->bus = 0;
- for(child = chip->children; child; child = child->next) {
- child->bus = &dev_root.link[0];
- }
+ device_t dev;
+
+ printk(BIOS_INFO, "write_protect_vgabios\n");
+ /* there are two possible devices. Just do both. */
+ dev = dev_find_device(PCI_VENDOR_ID_VIA, 0x3122, 0);
+ if(dev)
+ pci_write_config8(dev, 0x61, 0xaa);
+
+ dev = dev_find_device(PCI_VENDOR_ID_VIA, 0x3123, 0);
+ if(dev)
+ pci_write_config8(dev, 0x61, 0xaa);
}
-struct chip_control mainboard_via_epia_control = {
- .enumerate = enumerate,
- .name = "VIA EPIA-M mainboard ",
+
+struct chip_operations mainboard_ops = {
+ CHIP_NAME("VIA EPIA-M Mainboard")
};