printk_foo -> printk(BIOS_FOO, ...)

[coreboot.git] / src / mainboard / via / epia-m / mainboard.c

diff --git a/src/mainboard/via/epia-m/mainboard.c b/src/mainboard/via/epia-m/mainboard.c
index 95973925935eff0aae571508163a1378194c23e2..0fe49fc46f83285db3678669ad2eaab86d95e122 100644 (file)
--- a/src/mainboard/via/epia-m/mainboard.c
+++ b/src/mainboard/via/epia-m/mainboard.c
@@ -1,36 +1,24 @@
-
 #include <console/console.h>
 #include <device/device.h>
 #include <device/pci.h>
 #include <device/pci_ids.h>
 #include <device/pci_ops.h>
-
 #include <arch/io.h>
-#include <device/chip.h>
 #include "chip.h"
+#include "vgachip.h"
 
 void vga_enable_console();
 
 
-static int
-mainboard_scan_bus(device_t root, int maxbus) 
-{
-       int retval;
-       printk_spew("%s: root %p maxbus %d\n", __FUNCTION__, root, maxbus);
-       retval = pci_scan_bus(root->bus, 0, 0xff, maxbus);
-       printk_spew("DONE %s: return %d\n", __FUNCTION__, maxbus);
-       return maxbus;
-}
-
-void vga_fixup(void) {
+static void vga_fixup(void) {
         // we do this right here because:
         // - all the hardware is working, and some VGA bioses seem to need
         //   that
-        // - we need page 0 below for linuxbios tables.
+        // - we need page 0 below for coreboot tables.
 
-        printk_debug("INSTALL REAL-MODE IDT\n");
+        printk(BIOS_DEBUG, "INSTALL REAL-MODE IDT\n");
         setup_realmode_idt();
-        printk_debug("DO THE VGA BIOS\n");
+        printk(BIOS_DEBUG, "DO THE VGA BIOS\n");
         do_vgabios();
         post_code(0x93);
        vga_enable_console();
@@ -42,58 +30,18 @@ void write_protect_vgabios(void)
 {
        device_t dev;
  
-       printk_info("write_protect_vgabios\n");
-       dev = dev_find_device(PCI_VENDOR_ID_VIA, 0x3123, 0);
+       printk(BIOS_INFO, "write_protect_vgabios\n");
+       /* there are two possible devices. Just do both. */
+       dev = dev_find_device(PCI_VENDOR_ID_VIA, 0x3122, 0);
        if(dev)
                pci_write_config8(dev, 0x61, 0xaa);
- 
-}
-
-static void
-enable(struct chip *chip, enum chip_pass pass)
-{
-
-        struct mainboard_tyan_s4882_config *conf = 
-               (struct mainboard_tyan_s4882_config *)chip->chip_info;
-
-        switch (pass) {
-               default: break;
-//             case CONF_PASS_PRE_CONSOLE:
-//             case CONF_PASS_PRE_PCI:
-               case CONF_PASS_POST_PCI:                
-//                case CONF_PASS_PRE_BOOT:
-//                     if (conf->fixup_scsi)
-//                             onboard_scsi_fixup();
-//                     if (conf->fixup_vga)
-//                             vga_fixup();
-                       printk_debug("mainboard fixup pass %d done\r\n",
-                                       pass);
-                       break;
-       }
 
+       dev = dev_find_device(PCI_VENDOR_ID_VIA, 0x3123, 0);
+       if(dev)
+               pci_write_config8(dev, 0x61, 0xaa);
 }
-static struct device_operations mainboard_operations = {
-       .read_resources   = root_dev_read_resources,
-       .set_resources    = root_dev_set_resources,
-       .enable_resources = enable_childrens_resources,
-       .init             = 0,
-       .scan_bus         = mainboard_scan_bus,
-       .enable           = 0,
-};
 
-static void enumerate(struct chip *chip)
-{
-       struct chip *child;
-       dev_root.ops = &mainboard_operations;
-       chip->dev = &dev_root;
-       chip->bus = 0;
-       for(child = chip->children; child; child = child->next) {
-               child->bus = &dev_root.link[0];
-       }
-}
-struct chip_control mainboard_via_epia_m_control = {
-       .enumerate = enumerate, 
-       .name      = "VIA EPIA-M mainboard ",
-       .enable = enable
+struct chip_operations mainboard_ops = {
+       CHIP_NAME("VIA EPIA-M Mainboard")
 };