-#define ASSEMBLY 1
-#define __PRE_RAM__
-
#include <stdint.h>
#include <string.h>
#include <device/pci_def.h>
#include <arch/romcc_io.h>
#include <cpu/x86/lapic.h>
#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "lib/ramtest.c"
-
+#include <pc80/mc146818rtc.h>
+#include <console/console.h>
+#include <lib.h>
#include <cpu/amd/model_fxx_rev.h>
#include "northbridge/amd/amdk8/incoherent_ht.c"
#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
#include "northbridge/amd/amdk8/raminit.h"
#include "cpu/amd/model_fxx/apic_timer.c"
#include "lib/delay.c"
-
#include "cpu/x86/lapic/boot_cpu.c"
#include "northbridge/amd/amdk8/reset_test.c"
#include "northbridge/amd/amdk8/debug.c"
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
+#include "cpu/x86/mtrr/earlymtrr.c"
#include "cpu/x86/bist.h"
-
#include "northbridge/amd/amdk8/setup_resource_map.c"
+#include "southbridge/amd/amd8111/amd8111_early_ctrl.c"
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-#include "southbridge/amd/amd8111/amd8111_early_ctrl.c"
-
static void memreset_setup(void)
{
if (is_cpu_pre_c0()) {
static inline void activate_spd_rom(const struct mem_controller *ctrl)
{
#define SMBUS_HUB 0x18
- int ret;
unsigned device=(ctrl->channel0[0])>>8;
smbus_write_byte(SMBUS_HUB, 0x01, device);
smbus_write_byte(SMBUS_HUB, 0x03, 0);
{
#define SMBUS_HUB 0x18
int ret;
- print_debug("change_i2c_mux i="); print_debug_hex8(device); print_debug("\r\n");
+ print_debug("change_i2c_mux i="); print_debug_hex8(device); print_debug("\n");
ret = smbus_write_byte(SMBUS_HUB, 0x01, device);
- print_debug("change_i2c_mux 1 ret="); print_debug_hex32(ret); print_debug("\r\n");
+ print_debug("change_i2c_mux 1 ret="); print_debug_hex32(ret); print_debug("\n");
ret = smbus_write_byte(SMBUS_HUB, 0x03, 0);
- print_debug("change_i2c_mux 2 ret="); print_debug_hex32(ret); print_debug("\r\n");
+ print_debug("change_i2c_mux 2 ret="); print_debug_hex32(ret); print_debug("\n");
}
#endif
return smbus_read_byte(device, address);
}
-#define QRANK_DIMM_SUPPORT 1
-
#include "northbridge/amd/amdk8/raminit.c"
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "lib/generic_sdram.c"
-
- /* tyan does not want the default */
-#include "resourcemap.c"
-
-#if CONFIG_LOGICAL_CPUS==1
-#define SET_NB_CFG_54 1
-#endif
+#include "resourcemap.c" /* tyan does not want the default */
#include "cpu/amd/dualcore/dualcore.c"
-
-#define RC0 ((1<<2)<<8)
-#define RC1 ((1<<1)<<8)
-#define RC2 ((1<<4)<<8)
-#define RC3 ((1<<3)<<8)
-
-#define DIMM0 0x50
-#define DIMM1 0x51
-#define DIMM2 0x52
-#define DIMM3 0x53
-
-#include "cpu/amd/car/copy_and_run.c"
-
+#include <spd.h>
#include "cpu/amd/car/post_cache_as_ram.c"
-
#include "cpu/amd/model_fxx/init_cpus.c"
-
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- unsigned last_boot_normal_x = last_boot_normal();
-
- /* Is this a cpu only reset? or Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal_x) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal_x) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
- );
-
- fallback_image:
- ;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
+#define RC0 ((1<<2)<<8)
+#define RC1 ((1<<1)<<8)
+#define RC2 ((1<<4)<<8)
+#define RC3 ((1<<3)<<8)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const struct mem_controller cpu[] = {
{
int needs_reset;
+ if (!cpu_init_detectedx && boot_cpu()) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ amd8111_enable_rom();
+ }
+
if (bist == 0) {
init_cpus(cpu_init_detectedx);
}
setup_s4880_resource_map();
needs_reset = setup_coherent_ht_domain();
-
+
#if CONFIG_LOGICAL_CPUS==1
// It is said that we should start core1 after all core0 launched
start_other_cores();
needs_reset |= ht_setup_chains_x();
if (needs_reset) {
- print_info("ht reset -\r\n");
+ print_info("ht reset -\n");
soft_reset();
}