* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#define RAMINIT_SYSINFO 1
-
#define FAM10_SCAN_PCI_BUS 0
#define FAM10_ALLOCATE_IO_RANGE 1
-#define QRANK_DIMM_SUPPORT 1
-
-#if CONFIG_LOGICAL_CPUS==1
-#define SET_NB_CFG_54 1
-#endif
-
-#define FAM10_SET_FIDVID 1
-#define FAM10_SET_FIDVID_CORE_RANGE 0
-
-#define DBGP_DEFAULT 7
-
#include <stdint.h>
#include <string.h>
#include <device/pci_def.h>
#include <device/pnp_def.h>
#include <arch/romcc_io.h>
#include <cpu/x86/lapic.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "console/console.c"
-#if CONFIG_USBDEBUG_DIRECT
-#include "southbridge/nvidia/mcp55/mcp55_enable_usbdebug_direct.c"
-#include "pc80/usbdebug_direct_serial.c"
-#endif
-#include "lib/ramtest.c"
-
+#include <console/console.h>
+#include <lib.h>
+#include <spd.h>
#include <cpu/amd/model_10xxx_rev.h>
-
-#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c"
+#include "southbridge/nvidia/mcp55/early_smbus.c"
#include "northbridge/amd/amdfam10/raminit.h"
#include "northbridge/amd/amdfam10/amdfam10.h"
-
+#include "cpu/amd/model_10xxx/apic_timer.c"
+#include "lib/delay.c"
#include "cpu/x86/lapic/boot_cpu.c"
#include "northbridge/amd/amdfam10/reset_test.c"
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-#include "superio/winbond/w83627hf/w83627hf_early_init.c"
-
+#include "superio/winbond/w83627hf/early_serial.c"
+#include "superio/winbond/w83627hf/early_init.c"
#include "cpu/x86/bist.h"
-
#include "northbridge/amd/amdfam10/debug.c"
-
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-
+#include "cpu/x86/mtrr/earlymtrr.c"
#include "northbridge/amd/amdfam10/setup_resource_map.c"
+#include "southbridge/nvidia/mcp55/early_ctrl.c"
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-#include "southbridge/nvidia/mcp55/mcp55_early_ctrl.c"
-
-static void memreset_setup(void)
-{
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static inline int spd_read_byte(unsigned device, unsigned address)
{
}
#include "northbridge/amd/amdfam10/amdfam10.h"
-#include "northbridge/amd/amdht/ht_wrapper.c"
-
#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c"
-#include "northbridge/amd/amdfam10/raminit_amdmct.c"
-#include "northbridge/amd/amdfam10/amdfam10_pci.c"
-
+#include "northbridge/amd/amdfam10/pci.c"
#include "resourcemap.c"
-
#include "cpu/amd/quadcore/quadcore.c"
-#define MCP55_NUM 1
-#define MCP55_USE_NIC 1
-
-#define MCP55_PCI_E_X_0 1
-
#define MCP55_MB_SETUP \
RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x44,/* GPIO38 PCI_REQ3 */ \
RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \
RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \
RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */
-#include "southbridge/nvidia/mcp55/mcp55_early_setup_ss.h"
-#include "southbridge/nvidia/mcp55/mcp55_early_setup_car.c"
-
-#include "cpu/amd/car/copy_and_run.c"
-
+#include "southbridge/nvidia/mcp55/early_setup_ss.h"
+#include "southbridge/nvidia/mcp55/early_setup_car.c"
#include "cpu/amd/car/post_cache_as_ram.c"
+#include "cpu/amd/microcode/microcode.c"
-#include "cpu/amd/model_10xxx/init_cpus.c"
-
-#include "cpu/amd/model_10xxx/fidvid.c"
+#if CONFIG_UPDATE_CPU_MICROCODE
+#include "cpu/amd/model_10xxx/update_microcode.c"
+#endif
-#include "southbridge/nvidia/mcp55/mcp55_enable_rom.c"
+#include "cpu/amd/model_10xxx/init_cpus.c"
#include "northbridge/amd/amdfam10/early_ht.c"
static void sio_setup(void)
{
- unsigned value;
uint32_t dword;
uint8_t byte;
dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4);
dword |= (1<<16);
pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword);
-
}
-#include "spd_addr.h"
-#include "cpu/amd/microcode/microcode.c"
-#include "cpu/amd/model_10xxx/update_microcode.c"
+static const u8 spd_addr[] = {
+ //first node
+ RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+#if CONFIG_MAX_PHYSICAL_CPUS > 1
+ //second node
+ RC00, DIMM4, DIMM6, 0, 0, DIMM5, DIMM7, 0, 0,
+#endif
+};
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
- u32 bsp_apicid = 0;
- u32 val;
- u32 wants_reset;
+ u32 bsp_apicid = 0, val, wants_reset;
msr_t msr;
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
set_bsp_node_CHtExtNodeCfgEn();
enumerate_ht_chain();
-
sio_setup();
-
- /* Setup the mcp55 */
- mcp55_enable_rom();
}
post_code(0x30);
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
- }
post_code(0x32);
w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
- uart_init();
console_init();
- printk(BIOS_DEBUG, "\n");
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
-#if CONFIG_USBDEBUG_DIRECT
- mcp55_enable_usbdebug_direct(DBGP_DEFAULT);
- early_usbdebug_direct_init();
-#endif
-
val = cpuid_eax(1);
printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val);
printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1);
/* Setup sysinfo defaults */
set_sysinfo_in_ram(0);
+#if CONFIG_UPDATE_CPU_MICROCODE
update_microcode(val);
+#endif
post_code(0x33);
cpuSetAMDMSR();
post_code(0x38);
-#if FAM10_SET_FIDVID == 1
+#if CONFIG_SET_FIDVID
msr = rdmsr(0xc0010071);
printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo);
printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo);
#endif
+ init_timer(); // Need to use TMICT to synconize FID/VID
+
wants_reset = mcp55_early_setup_x();
/* Reset for HT, FIDVID, PLL and errata changes to take affect. */
printk(BIOS_DEBUG, "enable_smbus()\n");
enable_smbus();
- post_code(0x3E);
- memreset_setup();
post_code(0x40);
printk(BIOS_DEBUG, "raminit_amdmct()\n");
raminit_amdmct(sysinfo);
post_code(0x41);
- printk(BIOS_DEBUG, "\n*** Yes, the copy/decompress is taking a while, FIXME!\n");
post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
post_code(0x43); // Should never see this post code.
}
+/**
+ * BOOL AMD_CB_ManualBUIDSwapList(u8 Node, u8 Link, u8 **List)
+ * Description:
+ * This routine is called every time a non-coherent chain is processed.
+ * BUID assignment may be controlled explicitly on a non-coherent chain. Provide a
+ * swap list. The first part of the list controls the BUID assignment and the
+ * second part of the list provides the device to device linking. Device orientation
+ * can be detected automatically, or explicitly. See documentation for more details.
+ *
+ * Automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially
+ * based on each device's unit count.
+ *
+ * Parameters:
+ * @param[in] u8 node = The node on which this chain is located
+ * @param[in] u8 link = The link on the host for this chain
+ * @param[out] u8** list = supply a pointer to a list
+ * @param[out] BOOL result = true to use a manual list
+ * false to initialize the link automatically
+ */
+BOOL AMD_CB_ManualBUIDSwapList (u8 node, u8 link, const u8 **List)
+{
+ static const u8 swaplist[] = { 0xFF, CONFIG_HT_CHAIN_UNITID_BASE, CONFIG_HT_CHAIN_END_UNITID_BASE, 0xFF };
+ /* If the BUID was adjusted in early_ht we need to do the manual override */
+ if ((CONFIG_HT_CHAIN_UNITID_BASE != 0) && (CONFIG_HT_CHAIN_END_UNITID_BASE != 0)) {
+ printk(BIOS_DEBUG, "AMD_CB_ManualBUIDSwapList()\n");
+ if ((node == 0) && (link == 0)) { /* BSP SB link */
+ *List = swaplist;
+ return 1;
+ }
+ }
+
+ return 0;
+}
projects / coreboot.git / blobdiff