printk_foo -> printk(BIOS_FOO, ...)
[coreboot.git] / src / mainboard / tyan / s2895 / irq_tables.c
index aa16866763c6eba49ecc472e73ff455c7fc63334..414084c64a48c886b48e5a16a15611af26e64bf5 100644 (file)
@@ -1,4 +1,4 @@
-/* This file was generated by getpir.c, do not modify! 
+/* This file was generated by getpir.c, do not modify!
    (but if you do, please run checkpir on it to verify)
    Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
 
 #include <stdint.h>
 #include <arch/pirq_routing.h>
 
-const struct irq_routing_table intel_irq_routing_table = {
-       PIRQ_SIGNATURE, /* u32 signature */
-       PIRQ_VERSION,   /* u16 version   */
-       32+16*11,        /* there can be total 11 devices on the bus */
-       1,           /* Where the interrupt router lies (bus) */
-       ((CK804_DEVN_BASE+9)<<3)|0,           /* Where the interrupt router lies (dev) */
-       0,         /* IRQs devoted exclusively to PCI usage */
-       0x10de,         /* Vendor */
-       0x005c,         /* Device */
-       0,         /* Crap (miniport) */
-       { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
-#if CK804_DEVN_BASE==0
-       0x31,         /*  u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */
-#else
-       0x19,
-#endif
-       {
-               {1,((CK804_DEVN_BASE+9)<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0, 0},
-               {0x4,(1<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0, 0},
-               {0x7,((CK804_DEVN_BASE+9)<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x0, 0},
-               {0x8,((CK804_DEVN_BASE+9)<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x1, 0},
-               {0x5,(6<<3)|0, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x2, 0},
-               {0x4,(8<<3)|0, {{0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}}, 0x3, 0},
-               {0x4,(7<<3)|0, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x4, 0},
-               {0x6,(0x0a<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x5, 0},
-               {0x4,(9<<3)|0, {{0x1, 0xdef8}, {2, 0xdef8}, {0, 0}, {0, 0}}, 0, 0},
-               {0x6,(0x0b<<3)|0, {{0x2, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0},
-               {0x6,(0x0c<<3)|0, {{0x4, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0},
-       }
-};
-
-static unsigned node_link_to_bus(unsigned node, unsigned link)
-{
-        device_t dev;
-        unsigned reg;
-
-        dev = dev_find_slot(0, PCI_DEVFN(0x18, 1));
-        if (!dev) {
-                return 0;
-        }
-        for(reg = 0xE0; reg < 0xF0; reg += 0x04) {
-                uint32_t config_map;
-                unsigned dst_node;
-                unsigned dst_link;
-                unsigned bus_base;
-                config_map = pci_read_config32(dev, reg);
-                if ((config_map & 3) != 3) {
-                        continue;
-                }
-                dst_node = (config_map >> 4) & 7;
-                dst_link = (config_map >> 8) & 3;
-                bus_base = (config_map >> 16) & 0xff;
-#if 0                           
-                printk_debug("node.link=bus: %d.%d=%d 0x%2x->0x%08x\n",
-                        dst_node, dst_link, bus_base,
-                        reg, config_map);
-#endif
-                if ((dst_node == node) && (dst_link == link))
-                {
-                        return bus_base;
-                }
-        }
-        return 0;
-}
+#include <cpu/amd/amdk8_sysconf.h>
 
-static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, 
+static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0,
                uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3,
                uint8_t slot, uint8_t rfu)
 {
-        pirq_info->bus = bus; 
-        pirq_info->devfn = devfn;
-                pirq_info->irq[0].link = link0;
-                pirq_info->irq[0].bitmap = bitmap0;
-                pirq_info->irq[1].link = link1;
-                pirq_info->irq[1].bitmap = bitmap1;
-                pirq_info->irq[2].link = link2;
-                pirq_info->irq[2].bitmap = bitmap2;
-                pirq_info->irq[3].link = link3;
-                pirq_info->irq[3].bitmap = bitmap3;
-        pirq_info->slot = slot;
-        pirq_info->rfu = rfu;
+       pirq_info->bus = bus;
+       pirq_info->devfn = devfn;
+               pirq_info->irq[0].link = link0;
+               pirq_info->irq[0].bitmap = bitmap0;
+               pirq_info->irq[1].link = link1;
+               pirq_info->irq[1].bitmap = bitmap1;
+               pirq_info->irq[2].link = link2;
+               pirq_info->irq[2].bitmap = bitmap2;
+               pirq_info->irq[3].link = link3;
+               pirq_info->irq[3].bitmap = bitmap3;
+       pirq_info->slot = slot;
+       pirq_info->rfu = rfu;
 }
 
+extern  unsigned char bus_ck804_0; //1
+extern  unsigned char bus_ck804_1; //2
+extern  unsigned char bus_ck804_2; //3
+extern  unsigned char bus_ck804_3; //4
+extern  unsigned char bus_ck804_4; //5
+extern  unsigned char bus_ck804_5; //6
+extern  unsigned char bus_8131_0;  //7
+extern  unsigned char bus_8131_1;  //8
+extern  unsigned char bus_8131_2;  //9
+extern  unsigned char bus_ck804b_0;//a
+extern  unsigned char bus_ck804b_1;//b
+extern  unsigned char bus_ck804b_2;//c
+extern  unsigned char bus_ck804b_3;//d
+extern  unsigned char bus_ck804b_4;//e
+extern  unsigned char bus_ck804b_5;//f
+
+
+extern  unsigned sbdn3;
+extern  unsigned sbdnb;
+
+extern void get_bus_conf(void);
+
 unsigned long write_pirq_routing_table(unsigned long addr)
 {
 
@@ -100,222 +59,32 @@ unsigned long write_pirq_routing_table(unsigned long addr)
        struct irq_info *pirq_info;
        unsigned slot_num;
        uint8_t *v;
+       unsigned sbdn;
 
-        uint8_t sum=0;
-        int i;
-
-        unsigned char bus_ck804_0; //1
-        unsigned char bus_ck804_1; //2
-        unsigned char bus_ck804_2; //3
-        unsigned char bus_ck804_3; //4
-        unsigned char bus_ck804_4; //5
-        unsigned char bus_ck804_5; //6
-        unsigned char bus_8131_0;  //7
-        unsigned char bus_8131_1;  //8
-        unsigned char bus_8131_2;  //9 
-        unsigned char bus_ck804b_0;//a 
-        unsigned char bus_ck804b_1;//b
-        unsigned char bus_ck804b_2;//c
-        unsigned char bus_ck804b_3;//d
-        unsigned char bus_ck804b_4;//e
-        unsigned char bus_ck804b_5;//f
-
-      {
-                device_t dev;
-                
-
-                bus_ck804_0 = node_link_to_bus(0, 0);
-                if (bus_ck804_0 == 0) {
-                        printk_debug("ERROR - cound not find bus for node 0 chain 0, using defaults\n");
-                        bus_ck804_0 = 1;
-                }       
-                /* CK804 */
-                dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE + 0x09,0));
-                if (dev) {
-                        bus_ck804_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-#if 0                   
-                        bus_ck804_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
-                        bus_ck804_2++;
-#else 
-                        bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
-                        bus_ck804_5++;
-#endif                  
-                }
-                else {
-                        printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", CK804_DEVN_BASE + 0x09);
-
-                        bus_ck804_1 = 2;
-#if 0
-                        bus_ck804_2 = 3;
-#else
-                        bus_ck804_5 = 3;
-#endif
+       uint8_t sum=0;
+       int i;
 
-                }
-#if 0                
-                dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0b,0));
-                if (dev) {
-                        bus_ck804_2 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-                        bus_ck804_3 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
-                        bus_ck804_3++;
-                }
-                else {
-                        printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", CK804_DEVN_BASE + 0x0b);
-
-                        bus_ck804_3 = bus_ck804_2+1;
-                }
-
-                dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0c,0));
-                if (dev) {
-                        bus_ck804_3 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-                        bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
-                        bus_ck804_4++;
-                }
-                else {
-                        printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", CK804_DEVN_BASE + 0x0c);
-
-                        bus_ck804_4 = bus_ck804_3+1;
-                }
-
-                dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0d,0));
-                if (dev) {
-                        bus_ck804_4 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-                        bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
-                        bus_ck804_5++;
-                }
-                else {
-                        printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n",CK804_DEVN_BASE + 0x0d);
-
-                        bus_ck804_5 = bus_ck804_4+1;
-                }
-#endif
-
-                dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0e,0));
-                if (dev) {
-                        bus_ck804_5 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-                        bus_8131_0 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
-                        bus_8131_0++;
-                }
-                else {
-                        printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n",CK804_DEVN_BASE + 0x0e);
-
-                        bus_8131_0 = bus_ck804_5+1;
-                }
-
-                /* 8131-1 */
-                dev = dev_find_slot(bus_8131_0, PCI_DEVFN(0x01,0));
-                if (dev) {
-                        bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-                        bus_8131_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
-                        bus_8131_2++;
-                }
-                else {
-                        printk_debug("ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0);
-
-                        bus_8131_1 = bus_8131_0+1;
-                        bus_8131_2 = bus_8131_0+2;
-                }
-                /* 8131-2 */
-                dev = dev_find_slot(bus_8131_0, PCI_DEVFN(0x02,0));
-                if (dev) {
-                        bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-                        bus_ck804b_0 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
-                        bus_ck804b_0++;
-                }
-                else {
-                        printk_debug("ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0);
-
-                        bus_8131_2 = bus_8131_1+1;
-                        bus_ck804b_0 = bus_8131_1+2;
-                }
-
-                /* CK804b */
-
-#if 0
-                dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(CK804_DEVN_BASE + 0x09,0));
-                if (dev) {
-                        bus_ck804b_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-                        bus_ck804b_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
-                        bus_ck804b_2++;
-                }       
-                else {  
-                        printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,CK804_DEVN_BASE+0x09);
-                
-                        bus_ck804b_1 = bus_ck804b_0+1;
-                        bus_ck804b_2 = bus_ck804b_0+2;
-                }
-                        
-                dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0b,0));
-                if (dev) {
-                        bus_ck804b_2 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-                        bus_ck804b_3 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
-                        bus_ck804b_3++;
-                }
-                else {
-                        printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,CK804_DEVN_BASE+0x0b);
-
-                        bus_ck804b_2 = bus_ck804b_0+1;
-                        bus_ck804b_3 = bus_ck804b_0+2;
-                }
-
-                dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0c,0));
-                if (dev) {
-                        bus_ck804b_3 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-                        bus_ck804b_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
-                        bus_ck804b_4++;
-                }
-                else {
-                        printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,CK804_DEVN_BASE+0x0c);
-
-                        bus_ck804b_4 = bus_ck804b_3+1;
-                }
-
-                dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0d,0));
-                if (dev) {
-                        bus_ck804b_4 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-                        bus_ck804b_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
-                        bus_ck804b_5++;
-                }
-                else {
-                        printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,CK804_DEVN_BASE+0x0d);
-
-                        bus_ck804b_5 = bus_ck804b_4+1;
-                }
+       get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c
+       sbdn = sysconf.sbdn;
 
-#endif
+       /* Align the table to be 16 byte aligned. */
+       addr += 15;
+       addr &= ~15;
 
-                dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0e,0));
-                if (dev) {
-                        bus_ck804b_5 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-                }
-                else {
-                        printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,CK804_DEVN_BASE+0x0e);
-#if 1
-                        bus_ck804b_5 = bus_ck804b_0+1;
-#endif
-
-                }
-
-        }
-
-        /* Align the table to be 16 byte aligned. */
-        addr += 15;
-        addr &= ~15;
-
-        /* This table must be betweeen 0xf0000 & 0x100000 */
-        printk_info("Writing IRQ routing tables to 0x%x...", addr);
+       /* This table must be betweeen 0xf0000 & 0x100000 */
+       printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);
 
        pirq = (void *)(addr);
        v = (uint8_t *)(addr);
-       
+
        pirq->signature = PIRQ_SIGNATURE;
        pirq->version  = PIRQ_VERSION;
-       
+
        pirq->rtr_bus = bus_ck804_0;
-       pirq->rtr_devfn = ((CK804_DEVN_BASE+9)<<3)|0;
+       pirq->rtr_devfn = ((sbdn+9)<<3)|0;
 
        pirq->exclusive_irqs = 0;
-       
+
        pirq->rtr_vendor = 0x10de;
        pirq->rtr_device = 0x005c;
 
@@ -326,84 +95,86 @@ unsigned long write_pirq_routing_table(unsigned long addr)
        pirq_info = (void *) ( &pirq->checksum + 1);
        slot_num = 0;
 //pci bridge
-       write_pirq_info(pirq_info, bus_ck804_0, ((CK804_DEVN_BASE+9)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
+       write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+9)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
        pirq_info++; slot_num++;
 //pcix bridge
-        write_pirq_info(pirq_info, bus_8131_0, (1<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
-        pirq_info++; slot_num++;
-             
-//second pci beidge   
-        write_pirq_info(pirq_info, bus_ck804b_0, ((CK804_DEVN_BASE+9)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x0, 0);
-        pirq_info++; slot_num++;
+       write_pirq_info(pirq_info, bus_8131_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
+       pirq_info++; slot_num++;
+
+       if(sysconf.pci1234[2] & 0xf) {
+       //second pci bridge
+               write_pirq_info(pirq_info, bus_ck804b_0, ((sbdnb+9)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x0, 0);
+               pirq_info++; slot_num++;
+       }
 #if 0
 //smbus
-       write_pirq_info(pirq_info, bus_ck804_0, ((CK804_DEVN_BASE+1)<<3)|0, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
-        pirq_info++; slot_num++;
+       write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+1)<<3)|0, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
+       pirq_info++; slot_num++;
 
 //usb
-       write_pirq_info(pirq_info, bus_ck804_0, ((CK804_DEVN_BASE+2)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0);
-        pirq_info++; slot_num++;
+       write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+2)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0);
+       pirq_info++; slot_num++;
 
 //audio
-       write_pirq_info(pirq_info, bus_ck804_0, ((CK804_DEVN_BASE+4)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
-        pirq_info++; slot_num++;
+       write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+4)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
+       pirq_info++; slot_num++;
 //sata
-       write_pirq_info(pirq_info, bus_ck804_0, ((CK804_DEVN_BASE+7)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
-        pirq_info++; slot_num++;
+       write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+7)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
+       pirq_info++; slot_num++;
 //sata
-        write_pirq_info(pirq_info, bus_ck804_0, ((CK804_DEVN_BASE+8)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
-        pirq_info++; slot_num++;
+       write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+8)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
+       pirq_info++; slot_num++;
 //nic
-        write_pirq_info(pirq_info, bus_ck804_0, ((CK804_DEVN_BASE+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
-        pirq_info++; slot_num++;
+       write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
+       pirq_info++; slot_num++;
 
 //Slot1 PCIE x16
-        write_pirq_info(pirq_info, bus_ck804_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 1, 0);
-        pirq_info++; slot_num++;
+       write_pirq_info(pirq_info, bus_ck804_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 1, 0);
+       pirq_info++; slot_num++;
 
 //firewire
-        write_pirq_info(pirq_info, bus_ck804_1, (0x5<<3)|0, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
-        pirq_info++; slot_num++;
+       write_pirq_info(pirq_info, bus_ck804_1, (0x5<<3)|0, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
+       pirq_info++; slot_num++;
 
 //Slot2 pci
-        write_pirq_info(pirq_info, bus_ck804_1, (0x4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 2, 0);
-        pirq_info++; slot_num++;
-//nic   
-        write_pirq_info(pirq_info, bus_ck804b_0, ((CK804_DEVN_BASE+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
-        pirq_info++; slot_num++;
-//Slot3 PCIE x16 
-        write_pirq_info(pirq_info, bus_ck804b_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 3, 0);
-        pirq_info++; slot_num++;
+       write_pirq_info(pirq_info, bus_ck804_1, (0x4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 2, 0);
+       pirq_info++; slot_num++;
+//nic
+       write_pirq_info(pirq_info, bus_ck804b_0, ((sbdnb+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
+       pirq_info++; slot_num++;
+//Slot3 PCIE x16
+       write_pirq_info(pirq_info, bus_ck804b_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 3, 0);
+       pirq_info++; slot_num++;
 
 //Slot4 PCIX
-        write_pirq_info(pirq_info, bus_8131_2, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 4, 0);
-        pirq_info++; slot_num++;
+       write_pirq_info(pirq_info, bus_8131_2, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 4, 0);
+       pirq_info++; slot_num++;
 
 //Slot5 PCIX
-        write_pirq_info(pirq_info, bus_8131_2, (9<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 5, 0);
-        pirq_info++; slot_num++;
+       write_pirq_info(pirq_info, bus_8131_2, (9<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 5, 0);
+       pirq_info++; slot_num++;
 
 //onboard scsi
-        write_pirq_info(pirq_info, bus_8131_2, (6<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0);
-        pirq_info++; slot_num++;
+       write_pirq_info(pirq_info, bus_8131_2, (6<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0);
+       pirq_info++; slot_num++;
 
 //Slot6 PCIX
-        write_pirq_info(pirq_info, bus_8131_1, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 6, 0);
-        pirq_info++; slot_num++;
+       write_pirq_info(pirq_info, bus_8131_1, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 6, 0);
+       pirq_info++; slot_num++;
 #endif
-                
-       pirq->size = 32 + 16 * slot_num; 
 
-        for (i = 0; i < pirq->size; i++)
-                sum += v[i];   
+       pirq->size = 32 + 16 * slot_num;
+
+       for (i = 0; i < pirq->size; i++)
+               sum += v[i];
 
        sum = pirq->checksum - sum;
 
-        if (sum != pirq->checksum) {
-                pirq->checksum = sum;
-        }
+       if (sum != pirq->checksum) {
+               pirq->checksum = sum;
+       }
 
-       printk_info("done.\n");
+       printk(BIOS_INFO, "done.\n");
 
        return  (unsigned long) pirq_info;