Simplify a few code chunks, fix whitespace and indentation.

[coreboot.git] / src / mainboard / tyan / s2892 / romstage.c

diff --git a/src/mainboard/tyan/s2892/romstage.c b/src/mainboard/tyan/s2892/romstage.c
index 111b5b5fc52dbf254f8c6161400e54804332f3de..2ab6d32090a3b2b1ca0a21fad1e1a34f4a7acd1a 100644 (file)
--- a/src/mainboard/tyan/s2892/romstage.c
+++ b/src/mainboard/tyan/s2892/romstage.c
@@ -1,9 +1,3 @@
-#define QRANK_DIMM_SUPPORT 1
-
-#if CONFIG_LOGICAL_CPUS==1
-#define SET_NB_CFG_54 1
-#endif
-
 #include <stdint.h>
 #include <string.h>
 #include <device/pci_def.h>
@@ -11,41 +5,28 @@
 #include <device/pnp_def.h>
 #include <arch/romcc_io.h>
 #include <cpu/x86/lapic.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-
-#include "pc80/serial.c"
-#include "console/console.c"
-#include "lib/ramtest.c"
-
+#include <pc80/mc146818rtc.h>
+#include <console/console.h>
+#include <lib.h>
+#include <spd.h>
 #include <cpu/amd/model_fxx_rev.h>
-
 #include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "southbridge/nvidia/ck804/ck804_early_smbus.c"
+#include "southbridge/nvidia/ck804/ck804_early_smbus.h"
 #include "northbridge/amd/amdk8/raminit.h"
 #include "cpu/amd/model_fxx/apic_timer.c"
 #include "lib/delay.c"
-
 #include "cpu/x86/lapic/boot_cpu.c"
 #include "northbridge/amd/amdk8/reset_test.c"
 #include "northbridge/amd/amdk8/debug.c"
 #include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
+#include "cpu/x86/mtrr/earlymtrr.c"
 #include "cpu/x86/bist.h"
-
 #include "northbridge/amd/amdk8/setup_resource_map.c"
 
 #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
 
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-       /* nothing to do */
-}
+static void memreset(int controllers, const struct mem_controller *ctrl) { }
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
 
 static inline int spd_read_byte(unsigned device, unsigned address)
 {
@@ -55,14 +36,10 @@ static inline int spd_read_byte(unsigned device, unsigned address)
 #include "northbridge/amd/amdk8/raminit.c"
 #include "northbridge/amd/amdk8/coherent_ht.c"
 #include "lib/generic_sdram.c"
-
- /* tyan does not want the default */
 #include "resourcemap.c"
-
 #include "cpu/amd/dualcore/dualcore.c"
-
-#define CK804_NUM 1
 #include "southbridge/nvidia/ck804/ck804_early_setup_ss.h"
+
 //set GPIO to input mode
 #define CK804_MB_SETUP \
        RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXA_PRSNT2_L*/ \
@@ -71,14 +48,8 @@ static inline int spd_read_byte(unsigned device, unsigned address)
        RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ \
 
 #include "southbridge/nvidia/ck804/ck804_early_setup_car.c"
-
-#include "cpu/amd/car/copy_and_run.c"
-
 #include "cpu/amd/car/post_cache_as_ram.c"
-
 #include "cpu/amd/model_fxx/init_cpus.c"
-
-#include "southbridge/nvidia/ck804/ck804_enable_rom.c"
 #include "northbridge/amd/amdk8/early_ht.c"
 
 static void sio_setup(void)
@@ -98,35 +69,27 @@ static void sio_setup(void)
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
        static const uint16_t spd_addr [] = {
-               (0xa<<3)|0, (0xa<<3)|2, 0, 0,
-               (0xa<<3)|1, (0xa<<3)|3, 0, 0,
+               DIMM0, DIMM2, 0, 0,
+               DIMM1, DIMM3, 0, 0,
 #if CONFIG_MAX_PHYSICAL_CPUS > 1
-               (0xa<<3)|4, (0xa<<3)|6, 0, 0,
-               (0xa<<3)|5, (0xa<<3)|7, 0, 0,
+               DIMM4, DIMM6, 0, 0,
+               DIMM5, DIMM7, 0, 0,
 #endif
        };
 
        int needs_reset;
-       unsigned bsp_apicid = 0;
-
+       unsigned bsp_apicid = 0, nodes;
        struct mem_controller ctrl[8];
-       unsigned nodes;
 
        if (!cpu_init_detectedx && boot_cpu()) {
                /* Nothing special needs to be done to find bus 0 */
                /* Allow the HT devices to be found */
-
                enumerate_ht_chain();
-
                sio_setup();
-
-               /* Setup the ck804 */
-               ck804_enable_rom();
        }
 
-       if (bist == 0) {
+       if (bist == 0)
                bsp_apicid = init_cpus(cpu_init_detectedx);
-       }
 
 //     post_code(0x32);
 
@@ -149,9 +112,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 #endif
 
        needs_reset |= ht_setup_chains_x();
-
        needs_reset |= ck804_early_setup_x();
-
        if (needs_reset) {
                printk(BIOS_INFO, "ht reset -\n");
                soft_reset();
@@ -169,4 +130,3 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 
        post_cache_as_ram();
 }
-