Move QRANK_DIMM_SUPPORT to Kconfig, removing it from romstage.c

[coreboot.git] / src / mainboard / tyan / s2891 / Kconfig

diff --git a/src/mainboard/tyan/s2891/Kconfig b/src/mainboard/tyan/s2891/Kconfig
index 53f62771300b1228bbef5a27552597d05f5ec361..31e99b6372b078066b838fe1b936d1e7e6d9fe97 100644 (file)
--- a/src/mainboard/tyan/s2891/Kconfig
+++ b/src/mainboard/tyan/s2891/Kconfig
@@ -1,121 +1,63 @@
-config BOARD_TYAN_S2891
-       bool "Thunder K8SRE (S2891)"
+if BOARD_TYAN_S2891
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+       def_bool y
        select ARCH_X86
-       select CPU_AMD_K8
        select CPU_AMD_SOCKET_940
        select NORTHBRIDGE_AMD_AMDK8
        select NORTHBRIDGE_AMD_AMDK8_ROOT_COMPLEX
        select SOUTHBRIDGE_NVIDIA_CK804
        select SOUTHBRIDGE_AMD_AMD8131
        select SUPERIO_WINBOND_W83627HF
+       select HAVE_BUS_CONFIG
+       select HAVE_HARD_RESET
+       select HAVE_OPTION_TABLE
        select HAVE_PIRQ_TABLE
        select HAVE_MP_TABLE
        select SERIAL_CPU_INIT
-       select AP_CODE_IN_CAR
        select HAVE_ACPI_TABLES
-       select BOARD_ROMSIZE_KB_1024
+       select BOARD_ROMSIZE_KB_512
+       select SB_HT_CHAIN_UNITID_OFFSET_ONLY
+       select QRANK_DIMM_SUPPORT
 
 config MAINBOARD_DIR
        string
        default tyan/s2891
-       depends on BOARD_TYAN_S2891
 
 config APIC_ID_OFFSET
        hex
        default 0x10
-       depends on BOARD_TYAN_S2891
 
 config SB_HT_CHAIN_ON_BUS0
        int
        default 2
-       depends on BOARD_TYAN_S2891
-
-config LB_CKS_RANGE_END
-       int
-       default 122
-       depends on BOARD_TYAN_S2891
-
-config LB_CKS_LOC
-       int
-        default 123
-       depends on BOARD_TYAN_S2891
 
 config MAINBOARD_PART_NUMBER
        string
-       default "s2891"
-       depends on BOARD_TYAN_S2891
+       default "S2891"
 
 config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
        hex
        default 0x2891
-       depends on BOARD_TYAN_S2891
-
-config HW_MEM_HOLE_SIZEK
-       hex
-       default 0x100000
-       depends on BOARD_TYAN_S2891
-
-config MEM_TRAIN_SEQ
-       bool
-       default n
-       depends on BOARD_TYAN_S2891
 
 config MAX_CPUS
        int
        default 4
-       depends on BOARD_TYAN_S2891
 
 config MAX_PHYSICAL_CPUS
        int
        default 2
-       depends on BOARD_TYAN_S2891
-
-config MEM_TRAIN_SEQ
-       bool
-       default n
-       depends on BOARD_TYAN_S2891
-
-config AP_CODE_IN_CAR
-       bool
-       default n
-       depends on BOARD_TYAN_S2891
-
-config HW_MEM_HOLE_SIZE_AUTO_INC
-       bool
-       default n
-       depends on BOARD_TYAN_S2891
 
 config HT_CHAIN_UNITID_BASE
        hex
        default 0
-       depends on BOARD_TYAN_S2891
 
 config HT_CHAIN_END_UNITID_BASE
        hex
        default 0x20
-       depends on BOARD_TYAN_S2891
-
-config USE_INIT
-       bool
-       default n
-       depends on BOARD_TYAN_S2891
-
-config WAIT_BEFORE_CPUS_INIT
-       bool
-       default n
-       depends on BOARD_TYAN_S2891
-
-config SB_HT_CHAIN_ON_BUS0
-       int
-       default 2
-       depends on BOARD_TYAN_S2891
-
-config SB_HT_CHAIN_UNITID_OFFSET_ONLY
-       bool
-       default n
-       depends on BOARD_TYAN_S2891
 
 config IRQ_SLOT_COUNT
        int
        default 11
-       depends on BOARD_TYAN_S2891
+
+endif # BOARD_TYAN_S2891