#include <string.h>
#include <stdint.h>
#if CONFIG_LOGICAL_CPUS==1
-#include <cpu/amd/dualcore.h>
+#include <cpu/amd/multicore.h>
#endif
+#include <cpu/amd/amdk8_sysconf.h>
+#include <stdlib.h>
// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables
//busnum is default
unsigned apicid_8131_1;
unsigned apicid_8131_2;
-unsigned sblk;
-unsigned pci1234[] =
+unsigned pci1234x[] =
{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not
//You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
0x0000ff0,
// 0x0000ff0,
// 0x0000ff0
};
-unsigned hc_possible_num;
-unsigned sbdn;
-unsigned hcdn[] =
+unsigned hcdnx[] =
{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most
0x20202020,
0x20202020,
unsigned sbdn3;
unsigned sbdn5;
-extern void get_sblk_pci1234(void);
+
static unsigned get_bus_conf_done = 0;
unsigned apicid_base;
device_t dev;
+ int i;
+
+ if(get_bus_conf_done==1) return; //do it only once
+
+ get_bus_conf_done = 1;
- if(get_bus_conf_done==1) return; //do it only once
+ sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
+ for(i=0;i<sysconf.hc_possible_num; i++) {
+ sysconf.pci1234[i] = pci1234x[i];
+ sysconf.hcdn[i] = hcdnx[i];
+ }
- get_bus_conf_done = 1;
+ get_sblk_pci1234();
- hc_possible_num = sizeof(pci1234)/sizeof(pci1234[0]);
-
- get_sblk_pci1234();
-
- sbdn = (hcdn[0] >> 8) & 0xff;
- sbdn3 = hcdn[0] & 0xff;
- sbdn5 = hcdn[1] & 0xff;
+ sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff;
+ sbdn3 = sysconf.hcdn[0] & 0xff;
+ sbdn5 = sysconf.hcdn[1] & 0xff;
- bus_8131_0 = (pci1234[0] >> 16) & 0xff;
+ bus_8131_0 = (sysconf.pci1234[0] >> 16) & 0xff;
bus_8111_0 = bus_8131_0;
/* 8111 */
- dev = dev_find_slot(bus_8111_0, PCI_DEVFN(sbdn,0));
+ dev = dev_find_slot(bus_8111_0, PCI_DEVFN(sysconf.sbdn,0));
if (dev) {
bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-#if HT_CHAIN_END_UNITID_BASE >= HT_CHAIN_UNITID_BASE
+#if CONFIG_HT_CHAIN_END_UNITID_BASE >= CONFIG_HT_CHAIN_UNITID_BASE
bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
bus_isa++;
-// printk_debug("bus_isa=%d\n",bus_isa);
+// printk(BIOS_DEBUG, "bus_isa=%d\n",bus_isa);
#endif
}
else {
- printk_debug("ERROR - could not find PCI %02x:03.0, using defaults\n", bus_8111_0);
+ printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:03.0, using defaults\n", bus_8111_0);
}
/* 8131-1 */
dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,0));
if (dev) {
bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE
- bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
- bus_isa++;
-// printk_debug("bus_isa=%d\n",bus_isa);
-#endif
}
else {
- printk_debug("ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0);
+ printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0);
}
/* 8132-2 */
dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,0));
if (dev) {
bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS);
+#if CONFIG_HT_CHAIN_END_UNITID_BASE < CONFIG_HT_CHAIN_UNITID_BASE
+ bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+ bus_isa++;
+// printk(BIOS_DEBUG, "bus_isa=%d\n",bus_isa);
+#endif
+
}
else {
- printk_debug("ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0);
+ printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0);
}
/* HT chain 1 */
// it is on node0, so it must be there
- bus_8151_0 = (pci1234[1] >> 16) & 0xff;
+ bus_8151_0 = (sysconf.pci1234[1] >> 16) & 0xff;
/* 8151 */
dev = dev_find_slot(bus_8151_0, PCI_DEVFN(sbdn5+1, 0));
if (dev) {
bus_8151_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-// printk_debug("bus_8151_1=%d\n",bus_8151_1);
+// printk(BIOS_DEBUG, "bus_8151_1=%d\n",bus_8151_1);
bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
bus_isa++;
}
/*I/O APICs: APIC ID Version State Address*/
#if CONFIG_LOGICAL_CPUS==1
apicid_base = get_apicid_base(3);
-#else
- apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
+#else
+ apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
#endif
apicid_8111 = apicid_base+0;
apicid_8131_1 = apicid_base+1;