-uses HAVE_MP_TABLE
-uses HAVE_PIRQ_TABLE
-uses USE_FALLBACK_IMAGE
-uses LB_CKS_RANGE_START
-uses LB_CKS_RANGE_END
-uses LB_CKS_LOC
-uses MAINBOARD
-uses ARCH
-uses HARD_RESET_BUS
-uses HARD_RESET_DEVICE
-uses HARD_RESET_FUNCTION
-#
-#
-###
-### Set all of the defaults for an x86 architecture
-###
-#
-#
-###
-### Build the objects we have code for in this directory.
-###
-##object mainboard.o
-config chip.h
-register "fixup_scsi" = "1"
-register "fixup_vga" = "1"
+## CONFIG_XIP_ROM_SIZE must be a power of 2.
+default CONFIG_XIP_ROM_SIZE = 64 * 1024
+include /config/nofailovercalculation.lb
+arch i386 end
##
-## Move the default LinuxBIOS cmos range off of AMD RTC registers
+## Build the objects we have code for in this directory.
##
-default LB_CKS_RANGE_START=49
-default LB_CKS_RANGE_END=122
-default LB_CKS_LOC=123
-
driver mainboard.o
-#driver adaptec_scsi.o
-#driver si_sata.o
-#driver intel_nic.o
-#dir ../drivers/broadcom_nic_ipmi
-dir ../drivers/ati_graph
-#object reset.o
-if HAVE_MP_TABLE object mptable.o end
-if HAVE_PIRQ_TABLE object irq_tables.o end
-#
-default HARD_RESET_BUS=1
-default HARD_RESET_DEVICE=4
-default HARD_RESET_FUNCTION=0
-#
-arch i386 end
-#cpu k8 end
-#
-###
-### Build our 16 bit and 32 bit linuxBIOS entry code
-###
-mainboardinit cpu/i386/entry16.inc
-mainboardinit cpu/i386/entry32.inc
-mainboardinit cpu/i386/bist32.inc
-ldscript /cpu/i386/entry16.lds
-ldscript /cpu/i386/entry32.lds
-#
-###
-### Build our reset vector (This is where linuxBIOS is entered)
-###
-if USE_FALLBACK_IMAGE
- mainboardinit cpu/i386/reset16.inc
- ldscript /cpu/i386/reset16.lds
-else
- mainboardinit cpu/i386/reset32.inc
- ldscript /cpu/i386/reset32.lds
-end
-#
-#### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-#
-###
-### Include an id string (For safe flashing)
-###
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-#
-####
-#### This is the early phase of linuxBIOS startup
-#### Things are delicate and we test to see if we should
-#### failover to another image.
-####
-#option MAX_REBOOT_CNT=2
-if USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-#
-###
-### Setup our mtrrs
-###
-mainboardinit cpu/k8/earlymtrr.inc
-###
-### Only the bootstrap cpu makes it here.
-### Failover if we need to
-###
-#
-if USE_FALLBACK_IMAGE
- mainboardinit ./failover.inc
-end
-#
-#
-###
-### Setup the serial port
-###
-mainboardinit pc80/serial.inc
-mainboardinit arch/i386/lib/console.inc
-mainboardinit cpu/i386/bist32_fail.inc
-#
-####
-#### O.k. We aren't just an intermediary anymore!
-####
-#
-###
-### Romcc output
-###
+#dir /drivers/si/3114
+object get_bus_conf.o
+if CONFIG_GENERATE_MP_TABLE object mptable.o end
+if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-makerule ./failover.E
- depends "$(MAINBOARD)/failover.c"
- action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E"
+if CONFIG_USE_INIT
+
+makerule ./auto.o
+ depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
+ action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
end
-makerule ./failover.inc
- depends "./romcc ./failover.E"
- action "./romcc -O2 -o failover.inc --label-prefix=failover ./failover.E"end
+else
+
+makerule ./auto.inc
+ depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
+ action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
+ action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
+ action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
+end
-makerule ./auto.E
- depends "$(MAINBOARD)/auto.c option_table.h"
- action "$(CPP) -I$(TOP)/src -I. $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
end
-makerule ./auto.inc
- depends "./romcc ./auto.E"
- action "./romcc -O2 -mcpu=k8 -o auto.inc --label-prefix=auto ./auto.E"
+##
+## Build our 16 bit and 32 bit coreboot entry code
+##
+if CONFIG_USE_FALLBACK_IMAGE
+ mainboardinit cpu/x86/16bit/entry16.inc
+ ldscript /cpu/x86/16bit/entry16.lds
end
-mainboardinit cpu/k8/enable_mmx_sse.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/k8/disable_mmx_sse.inc
-#
-###
-### Include the secondary Configuration files
-###
-dir /pc80
-
-northbridge amd/amdk8 "mc0"
- pci 0:18.0
- pci 0:18.0
- pci 0:18.0
- pci 0:18.1
- pci 0:18.2
- pci 0:18.3
- southbridge amd/amd8131 "amd8131" link 2
- pci 0:0.0
- pci 0:0.1
- pci 0:1.0
- pci 0:1.1
- end
- southbridge amd/amd8111 "amd8111" link 2
- pci 0:0.0
- pci 0:1.0 on
- pci 0:1.1 on
- pci 0:1.2 on
- pci 0:1.3 on
- pci 0:1.5 off
- pci 0:1.6 off
- pci 1:0.0 on
- pci 1:0.1 on
- pci 1:0.2 on
- pci 1:1.0 off
-# superio winbond/w83627hf link 1
-# pnp 2e.0 on # Floppy
-# io 0x60 = 0x3f0
-# irq 0x70 = 6
-# drq 0x74 = 2
-# pnp 2e.1 off # Parallel Port
-# io 0x60 = 0x378
-# irq 0x70 = 7
-# pnp 2e.2 on # Com1
-# io 0x60 = 0x3f8
-# irq 0x70 = 4
-# pnp 2e.3 off # Com2
-# io 0x60 = 0x2f8
-# irq 0x70 = 3
-# pnp 2e.5 on # Keyboard
-# io 0x60 = 0x60
-# io 0x62 = 0x64
-# irq 0x70 = 1
-# irq 0x72 = 12
-# pnp 2e.6 off # CIR
-# pnp 2e.7 off # GAME_MIDI_GIPO1
-# pnp 2e.8 off # GPIO2
-# pnp 2e.9 off # GPIO3
-# pnp 2e.a off # ACPI
-# pnp 2e.b on # HW Monitor
-# io 0x60 = 0x290
-# end
+mainboardinit cpu/x86/32bit/entry32.inc
+
+ if CONFIG_USE_INIT
+ ldscript /cpu/x86/32bit/entry32.lds
+ end
+
+ if CONFIG_USE_INIT
+ ldscript /cpu/amd/car/cache_as_ram.lds
end
+
+##
+## Build our reset vector (This is where coreboot is entered)
+##
+if CONFIG_USE_FALLBACK_IMAGE
+ mainboardinit cpu/x86/16bit/reset16.inc
+ ldscript /cpu/x86/16bit/reset16.lds
+else
+ mainboardinit cpu/x86/32bit/reset32.inc
+ ldscript /cpu/x86/32bit/reset32.lds
end
-northbridge amd/amdk8 "mc1"
- pci 0:19.0
- pci 0:19.0
- pci 0:19.0
- pci 0:19.1
- pci 0:19.2
- pci 0:19.3
+##
+## Include an id string (For safe flashing)
+##
+mainboardinit arch/i386/lib/id.inc
+ldscript /arch/i386/lib/id.lds
+
+##
+## Setup Cache-As-Ram
+##
+mainboardinit cpu/amd/car/cache_as_ram.inc
+
+###
+### This is the early phase of coreboot startup
+### Things are delicate and we test to see if we should
+### failover to another image.
+###
+if CONFIG_USE_FALLBACK_IMAGE
+ ldscript /arch/i386/lib/failover.lds
end
+###
+### O.k. We aren't just an intermediary anymore!
+###
-#dir /bioscall
-cpu k8 "cpu0"
- register "up" = "{.chip = &amd8131, .ht_width=16, .ht_speed=600}"
+##
+## Setup RAM
+##
+if CONFIG_USE_INIT
+initobject auto.o
+else
+mainboardinit ./auto.inc
end
-cpu k8 "cpu1"
+##
+## Include the secondary Configuration files
+##
+config chip.h
+
+# sample config for tyan/s2881
+chip northbridge/amd/amdk8/root_complex
+ device apic_cluster 0 on
+ chip cpu/amd/socket_940
+ device apic 0 on end
+ end
+ end
+ device pci_domain 0 on
+ chip northbridge/amd/amdk8
+ device pci 18.0 on end # LDT0
+ device pci 18.0 on end # LDT1
+ device pci 18.0 on # northbridge
+ # devices on link 2, link 2 == LDT 2
+ chip southbridge/amd/amd8131
+ # the on/off keyword is mandatory
+ device pci 0.0 on
+ device pci 9.0 on end # Broadcom 5704
+ device pci 9.1 on end
+ device pci a.0 on end # Adaptic
+ device pci a.1 on end
+ end
+ device pci 0.1 on end
+ device pci 1.0 on end
+ device pci 1.1 on end
+ end
+ chip southbridge/amd/amd8111
+ # this "device pci 0.0" is the parent the next one
+ # PCI bridge
+ device pci 0.0 on
+ device pci 0.0 on end
+ device pci 0.1 on end
+ device pci 0.2 off end
+ device pci 1.0 off end
+ device pci 5.0 on end # SiI
+ device pci 6.0 on end
+ end
+ device pci 1.0 on
+ chip superio/winbond/w83627hf
+ device pnp 2e.0 on # Floppy
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
+ end
+ device pnp 2e.1 off # Parallel Port
+ io 0x60 = 0x378
+ irq 0x70 = 7
+ end
+ device pnp 2e.2 on # Com1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.3 off # Com2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 2e.5 on # Keyboard
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ irq 0x72 = 12
+ end
+ device pnp 2e.6 off # CIR
+ io 0x60 = 0x100
+ end
+ device pnp 2e.7 off # GAME_MIDI_GIPO1
+ io 0x60 = 0x220
+ io 0x62 = 0x300
+ irq 0x70 = 9
+ end
+ device pnp 2e.8 off end # GPIO2
+ device pnp 2e.9 off end # GPIO3
+ device pnp 2e.a off end # ACPI
+ device pnp 2e.b on # HW Monitor
+ io 0x60 = 0x290
+ irq 0x70 = 5
+ end
+ end
+ end
+ device pci 1.1 on end
+ device pci 1.2 on end
+ device pci 1.3 on
+ chip drivers/generic/generic #dimm 0-0-0
+ device i2c 50 on end
+ end
+ chip drivers/generic/generic #dimm 0-0-1
+ device i2c 51 on end
+ end
+ chip drivers/generic/generic #dimm 0-1-0
+ device i2c 52 on end
+ end
+ chip drivers/generic/generic #dimm 0-1-1
+ device i2c 53 on end
+ end
+ chip drivers/generic/generic #dimm 1-0-0
+ device i2c 54 on end
+ end
+ chip drivers/generic/generic #dimm 1-0-1
+ device i2c 55 on end
+ end
+ chip drivers/generic/generic #dimm 1-1-0
+ device i2c 56 on end
+ end
+ chip drivers/generic/generic #dimm 1-1-1
+ device i2c 57 on end
+ end
+ chip drivers/i2c/adm1027 # ADT7463A CPU0/1 temp, CPU1 vid, SYS FAN 1/2/3
+ device i2c 2d on end
+ end
+ chip drivers/generic/generic # Winbond HWM 0x54 CPU0/1 VRM temp, SYSFAN 4,CPU0 vid, CPU0/1 FAN
+ device i2c 2a on end
+ end
+ chip drivers/generic/generic # Winbond HWM 0x92
+ device i2c 49 on end
+ end
+ chip drivers/generic/generic # Winbond HWM 0x94
+ device i2c 4a on end
+ end
+ end # acpi
+ device pci 1.5 off end
+ device pci 1.6 off end
+ register "ide0_enable" = "1"
+ register "ide1_enable" = "1"
+ end
+ end # device pci 18.0
+
+ device pci 18.1 on end
+ device pci 18.2 on end
+ device pci 18.3 on end
+ end
+ end
end
+