#include <console/console.h>
#include <arch/smp/mpspec.h>
+#include <arch/ioapic.h>
#include <device/pci.h>
#include <string.h>
#include <stdint.h>
#include <cpu/amd/multicore.h>
#endif
-
static unsigned node_link_to_bus(unsigned node, unsigned link)
{
device_t dev;
return 0;
}
-
static void *smp_write_config_table(void *v)
{
- static const char sig[4] = "PCMP";
- static const char oem[8] = "COREBOOT";
- static const char productid[12] = "S2880 ";
struct mp_config_table *mc;
-
- unsigned char bus_num;
- unsigned char bus_isa;
+ int bus_isa;
unsigned char bus_chain_0;
unsigned char bus_8131_1;
unsigned char bus_8131_2;
unsigned apicid_8131_2;
mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
- memset(mc, 0, sizeof(*mc));
-
- memcpy(mc->mpc_signature, sig, sizeof(sig));
- mc->mpc_length = sizeof(*mc); /* initially just the header */
- mc->mpc_spec = 0x04;
- mc->mpc_checksum = 0; /* not yet computed */
- memcpy(mc->mpc_oem, oem, sizeof(oem));
- memcpy(mc->mpc_productid, productid, sizeof(productid));
- mc->mpc_oemptr = 0;
- mc->mpc_oemsize = 0;
- mc->mpc_entry_count = 0; /* No entries yet... */
- mc->mpc_lapic = LAPIC_ADDR;
- mc->mpe_length = 0;
- mc->mpe_checksum = 0;
- mc->reserved = 0;
+
+ mptable_init(mc, LAPIC_ADDR);
smp_write_processors(mc);
dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x03,0));
if (dev) {
bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
- bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
- bus_isa++;
}
else {
printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n");
bus_8111_1 = 4;
- bus_isa = 5;
}
/* 8131-1 */
dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x01,0));
}
/*Bus: Bus ID Type*/
- /* define bus and isa numbers */
- for(bus_num = 0; bus_num < bus_isa; bus_num++) {
- smp_write_bus(mc, bus_num, "PCI ");
- }
- smp_write_bus(mc, bus_isa, "ISA ");
-
+ mptable_write_buses(mc, NULL, &bus_isa);
/*I/O APICs: APIC ID Version State Address*/
#if CONFIG_LOGICAL_CPUS==1
apicid_8111 = apicid_base+0;
apicid_8131_1 = apicid_base+1;
apicid_8131_2 = apicid_base+2;
- smp_write_ioapic(mc, apicid_8111, 0x11, 0xfec00000);
+ smp_write_ioapic(mc, apicid_8111, 0x11, IO_APIC_ADDR);
{
device_t dev;
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (6<<2)|3, apicid_8131_2, 0x0);//
/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/
- smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x0);
- smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x1);
+ smp_write_lintsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x0);
+ smp_write_lintsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x1);
/* There is no extension information... */
/* Compute the checksums */