printk_foo -> printk(BIOS_FOO, ...)

[coreboot.git] / src / mainboard / technologic / ts5300 / mainboard.c

diff --git a/src/mainboard/technologic/ts5300/mainboard.c b/src/mainboard/technologic/ts5300/mainboard.c
index e28f9715b8f86332008fcf1a6cb4e926ebe3a9d2..a9b6185dd2ce816468c995246f3049df7b9776b8 100644 (file)
--- a/src/mainboard/technologic/ts5300/mainboard.c
+++ b/src/mainboard/technologic/ts5300/mainboard.c
@@ -3,9 +3,146 @@
 #include <device/pci.h>
 #include <device/pci_ids.h>
 #include <device/pci_ops.h>
+#include <cpu/amd/sc520.h>
 #include "chip.h"
 
-struct chip_operations mainboard_technologic_ts5300_control = {
-       CHIP_NAME("Technologic Systems TS5300 mainboard ")
+
+static void irqdump()
+{
+  volatile unsigned char *irq;
+  void *mmcr;
+
+
+  int i;
+  int irqlist[] = {0xd00, 0xd02, 0xd03, 0xd04, 0xd08, 0xd0a,
+               0xd14, 0xd18, 0xd1a, 0xd1b, 0xd1c,
+               0xd20, 0xd21, 0xd22, 0xd28, 0xd29, 
+               0xd30, 0xd31, 0xd32, 0xd33,
+               0xd40, 0xd41, 0xd42, 0xd43,0xd44, 0xd45, 0xd46, 
+               0xd50, 0xd51, 0xd52, 0xd53,0xd54, 0xd55, 0xd56, 0xd57,0xd58, 0xd59, 0xd5a, 
+               -1};
+  mmcr = (void *) 0xfffef000;
+
+  printk(BIOS_ERR, "mmcr is %p\n", mmcr);
+  for(i = 0; irqlist[i] >= 0; i++) {
+    irq = mmcr + irqlist[i];
+    printk(BIOS_ERR, "0x%x register @%p is 0x%lx\n", irqlist[i], irq, *irq);
+  }
+
+}
+
+/* TODO: finish up mmcr struct in sc520.h, and;
+   - set ADDDECTL (now done in raminit.c in cpu/amd/sc520
+*/
+static void enable_dev(struct device *dev) {
+       volatile struct mmcrpic *pic = MMCRPIC;
+       volatile struct mmcr *mmcr = MMCRDEFAULT;
+
+       /* currently, nothing in the device to use, so ignore it. */
+       printk(BIOS_ERR, "Technologic Systems 5300 ENTER %s\n", __func__);
+
+       /* from fuctory bios */
+       /* NOTE: the following interrupt settings made interrupts work
+        * for hard drive, and serial, but not for ethernet 
+        */
+
+       printk(BIOS_ERR, "Setting up PIC\n");
+       /* just do what they say and nobody gets hurt. */
+       mmcr->pic.pcicr = 0 ;
+       /* all ints to level */
+       mmcr->pic.mpicmode = 0;
+       mmcr->pic.sl1picmode = 0;
+       mmcr->pic.sl2picmode = 0;
+
+       mmcr->pic.intpinpol = 0x100;
+
+       mmcr->pic.pit0map = 1;
+       mmcr->pic.uart1map = 0x0c;
+       mmcr->pic.uart2map = 0x0b;
+       mmcr->pic.rtcmap  = 0x03;
+       mmcr->pic.ferrmap = 0x00;
+       mmcr->pic.intpinpol = 0x100;
+       
+       mmcr->pic.gp0imap = 0x00;
+       mmcr->pic.gp1imap = 0x02;
+       mmcr->pic.gp2imap = 0x07;
+       mmcr->pic.gp3imap = 0x05;
+       mmcr->pic.gp4imap = 0x06;
+       mmcr->pic.gp5imap = 0x0d;
+       mmcr->pic.gp6imap = 0x15;
+       mmcr->pic.gp7imap = 0x16;
+       mmcr->pic.gp8imap = 0x3;
+       mmcr->pic.gp9imap = 0x4;
+       mmcr->pic.gp10imap = 0x9;
+
+       // irqdump();
+
+       printk(BIOS_ERR, "Setting up sysarb\n");
+       mmcr->dbctl.dbctl = 0x01;
+       mmcr->sysarb.ctl = 0x00;
+       mmcr->sysarb.menb = 0x1f;
+       mmcr->sysarb.prictl = 0x40000f0f;
+       
+       /* this is bios setting, depends on sysarb above */
+       mmcr->hostbridge.ctl = 0x0;
+       mmcr->hostbridge.tgtirqctl = 0x0;
+       mmcr->hostbridge.tgtirqsta = 0xf00;
+       mmcr->hostbridge.mstirqctl = 0x0;
+       mmcr->hostbridge.mstirqsta = 0x708;
+
+       printk(BIOS_ERR, "Setting up pio\n");
+       /* pio */
+       mmcr->pio.pfs15_0 = 0xffff;
+       mmcr->pio.pfs31_16 = 0xffff;
+       mmcr->pio.cspfs = 0xfe;
+       mmcr->pio.clksel = 0x13;
+       mmcr->pio.dsctl = 0x200;
+       mmcr->pio.data15_0 = 0xde04;
+       mmcr->pio.data31_16 = 0xef9f;
+
+       printk(BIOS_ERR, "Setting up sysmap\n");
+       /* system memory map */
+       mmcr->sysmap.adddecctl = 0x04;
+       mmcr->sysmap.wpvsta = 0x8006;
+       mmcr->sysmap.par[1] = 0x340f0070;
+       mmcr->sysmap.par[2] = 0x380701f0;
+       mmcr->sysmap.par[3] = 0x3c0103f6;
+       mmcr->sysmap.par[4] = 0x2c0f0300;
+       mmcr->sysmap.par[5] = 0x447c00a0;
+       mmcr->sysmap.par[6] = 0xe600000c;
+       mmcr->sysmap.par[7] = 0x300046e8;
+       mmcr->sysmap.par[8] = 0x500400d0;
+       mmcr->sysmap.par[9] = 0x281f0140;
+       mmcr->sysmap.par[13] = 0x8a07c940;
+       mmcr->sysmap.par[15] = 0xee00400e;
+
+       printk(BIOS_ERR, "Setting up gpctl\n");
+       mmcr->gpctl.gpcsrt = 0x01;
+       mmcr->gpctl.gpcspw = 0x09;
+       mmcr->gpctl.gpcsoff = 0x01;
+       mmcr->gpctl.gprdw = 0x07;
+       mmcr->gpctl.gprdoff = 0x02;
+       mmcr->gpctl.gpwrw = 0x07;
+       mmcr->gpctl.gpwroff = 0x02;
+       
+       //mmcr->reset.sysinfo = 0xdf;
+       //mmcr->reset.rescfg = 0x5;
+       /* their IRQ table is wrong. Just hardwire it */
+       //{
+       //  char pciints[4] = {15, 15, 15, 15};
+       //  pci_assign_irqs(0, 12, pciints);
+       //}
+       /* the assigned failed but we just noticed -- there is no
+        * dma mapping, and selftest on e100 requires that dma work
+        */
+       mmcr->dmacontrol.extchanmapa = 0xf210;
+       mmcr->dmacontrol.extchanmapb = 0xffff;
+
+       printk(BIOS_ERR, "TS5300 EXIT %s\n", __func__);
+}
+
+struct chip_operations mainboard_ops = {
+       CHIP_NAME("Technologic Systems TS-5300 Mainboard")
+       .enable_dev = enable_dev
 };