-1};
mmcr = (void *) 0xfffef000;
- printk_err("mmcr is %p\n", mmcr);
+ printk(BIOS_ERR, "mmcr is %p\n", mmcr);
for(i = 0; irqlist[i] >= 0; i++) {
irq = mmcr + irqlist[i];
- printk_err("0x%x register @%p is 0x%lx\n", irqlist[i], irq, *irq);
+ printk(BIOS_ERR, "0x%x register @%p is 0x%lx\n", irqlist[i], irq, *irq);
}
}
- set ADDDECTL (now done in raminit.c in cpu/amd/sc520
*/
static void enable_dev(struct device *dev) {
-#if !CONFIG_CBFS
- extern unsigned char *rom_start, *rom_end;
-#endif
volatile struct mmcrpic *pic = MMCRPIC;
volatile struct mmcr *mmcr = MMCRDEFAULT;
/* currently, nothing in the device to use, so ignore it. */
- printk_err("Technologic Systems 5300 ENTER %s\n", __func__);
+ printk(BIOS_ERR, "Technologic Systems 5300 ENTER %s\n", __func__);
/* from fuctory bios */
/* NOTE: the following interrupt settings made interrupts work
* for hard drive, and serial, but not for ethernet
*/
- printk_err("Setting up PIC\n");
+ printk(BIOS_ERR, "Setting up PIC\n");
/* just do what they say and nobody gets hurt. */
mmcr->pic.pcicr = 0 ;
/* all ints to level */
// irqdump();
- printk_err("Setting up sysarb\n");
+ printk(BIOS_ERR, "Setting up sysarb\n");
mmcr->dbctl.dbctl = 0x01;
mmcr->sysarb.ctl = 0x00;
mmcr->sysarb.menb = 0x1f;
mmcr->hostbridge.mstirqctl = 0x0;
mmcr->hostbridge.mstirqsta = 0x708;
- printk_err("Setting up pio\n");
+ printk(BIOS_ERR, "Setting up pio\n");
/* pio */
mmcr->pio.pfs15_0 = 0xffff;
mmcr->pio.pfs31_16 = 0xffff;
mmcr->pio.data15_0 = 0xde04;
mmcr->pio.data31_16 = 0xef9f;
- printk_err("Setting up sysmap\n");
+ printk(BIOS_ERR, "Setting up sysmap\n");
/* system memory map */
mmcr->sysmap.adddecctl = 0x04;
mmcr->sysmap.wpvsta = 0x8006;
mmcr->sysmap.par[13] = 0x8a07c940;
mmcr->sysmap.par[15] = 0xee00400e;
- printk_err("Setting up gpctl\n");
+ printk(BIOS_ERR, "Setting up gpctl\n");
mmcr->gpctl.gpcsrt = 0x01;
mmcr->gpctl.gpcspw = 0x09;
mmcr->gpctl.gpcsoff = 0x01;
mmcr->dmacontrol.extchanmapa = 0xf210;
mmcr->dmacontrol.extchanmapb = 0xffff;
-#if !CONFIG_CBFS
- /* hack for IDIOTIC need to fix rom_start */
- printk_err("Patching rom_start due to sc520 limits\n");
- rom_start = 0x09400000 + 0xe0000;
- rom_end = rom_start + CONFIG_PAYLOAD_SIZE - 1;
-#endif
-
- printk_err("TS5300 EXIT %s\n", __func__);
-
+ printk(BIOS_ERR, "TS5300 EXIT %s\n", __func__);
}
struct chip_operations mainboard_ops = {