printk_foo -> printk(BIOS_FOO, ...)

[coreboot.git] / src / mainboard / technexion / tim5690 / mainboard.c

diff --git a/src/mainboard/technexion/tim5690/mainboard.c b/src/mainboard/technexion/tim5690/mainboard.c
index 8ca3f4c8f586b820daa44162e976ad5567a049bc..25e9e07e29b45b887e8298c9d51753c4bedee904 100644 (file)
--- a/src/mainboard/technexion/tim5690/mainboard.c
+++ b/src/mainboard/technexion/tim5690/mainboard.c
@@ -146,7 +146,7 @@ static void set_thermal_config(void)
 
        byte = ADT7461_read_byte(0x02); /* read status register to clear it */
        ARA_read_byte(0x05); /* A hardware alert can only be cleared by the master sending an ARA as a read command */
-       printk_info("Init adt7461 end , status 0x02 %02x\n", byte);
+       printk(BIOS_INFO, "Init adt7461 end , status 0x02 %02x\n", byte);
 
        /* sb600 settings for thermal config */
        /* set SB600 GPIO 64 to GPIO with pull-up */
@@ -245,7 +245,7 @@ void tim5690_enable(device_t dev)
        u16 gpio_base = IT8712F_SIMPLE_IO_BASE;
        u8 port2;
 
-       printk_info("Mainboard tim5690 Enable. dev=0x%p\n", dev);
+       printk(BIOS_INFO, "Mainboard tim5690 Enable. dev=0x%p\n", dev);
 
        mb_gpio_init(&gpio_base);
 
@@ -261,12 +261,12 @@ void tim5690_enable(device_t dev)
 
        /* TOP_MEM: the top of DRAM below 4G */
        msr = rdmsr(TOP_MEM);
-       printk_info("%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n",
+       printk(BIOS_INFO, "%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n",
                    __func__, msr.lo, msr.hi);
 
        /* TOP_MEM2: the top of DRAM above 4G */
        msr2 = rdmsr(TOP_MEM2);
-       printk_info("%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n",
+       printk(BIOS_INFO, "%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n",
                    __func__, msr2.lo, msr2.hi);
 
        switch (msr.lo) {
@@ -288,7 +288,7 @@ void tim5690_enable(device_t dev)
        }
 
        uma_memory_base = msr.lo - uma_memory_size;     /* TOP_MEM1 */
-       printk_info("%s: uma size 0x%08llx, memory start 0x%08llx\n",
+       printk(BIOS_INFO, "%s: uma size 0x%08llx, memory start 0x%08llx\n",
                    __func__, uma_memory_size, uma_memory_base);
 
        /* TODO: TOP_MEM2 */
@@ -306,7 +306,7 @@ int add_mainboard_resources(struct lb_memory *mem)
         * in some circumstances we want the memory mentioned as reserved.
         */
 #if (CONFIG_GFXUMA == 1)
-       printk_info("uma_memory_base=0x%llx, uma_memory_size=0x%llx \n",
+       printk(BIOS_INFO, "uma_memory_base=0x%llx, uma_memory_size=0x%llx \n",
        uma_memory_base, uma_memory_size);
        lb_add_memory_range(mem, LB_MEM_RESERVED,
                uma_memory_base, uma_memory_size);