#include <lib.h>
#include <spd.h>
#include <cpu/amd/model_10xxx_rev.h>
-#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c" // for enable the FAN
+#include "southbridge/nvidia/mcp55/early_smbus.c" // for enable the FAN
#include "northbridge/amd/amdfam10/raminit.h"
#include "northbridge/amd/amdfam10/amdfam10.h"
#include "cpu/amd/model_10xxx/apic_timer.c"
#include "lib/delay.c"
#include "cpu/x86/lapic/boot_cpu.c"
#include "northbridge/amd/amdfam10/reset_test.c"
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-#include "superio/winbond/w83627hf/w83627hf_early_init.c"
+#include "superio/winbond/w83627hf/early_serial.c"
+#include "superio/winbond/w83627hf/early_init.c"
#include "cpu/x86/bist.h"
#include "northbridge/amd/amdfam10/debug.c"
#include "cpu/x86/mtrr/earlymtrr.c"
#include "northbridge/amd/amdfam10/setup_resource_map.c"
-#include "southbridge/nvidia/mcp55/mcp55_early_ctrl.c"
+#include "southbridge/nvidia/mcp55/early_ctrl.c"
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
+#define DUMMY_DEV PNP_DEV(0x2e, 0)
static inline void activate_spd_rom(const struct mem_controller *ctrl)
{
#include "northbridge/amd/amdfam10/amdfam10.h"
#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c"
-#include "northbridge/amd/amdfam10/amdfam10_pci.c"
+#include "northbridge/amd/amdfam10/pci.c"
#include "resourcemap.c"
#include "cpu/amd/quadcore/quadcore.c"
-#include "southbridge/nvidia/mcp55/mcp55_early_setup_ss.h"
-#include "southbridge/nvidia/mcp55/mcp55_early_setup_car.c"
+#include "southbridge/nvidia/mcp55/early_setup_ss.h"
+#include "southbridge/nvidia/mcp55/early_setup_car.c"
#include "cpu/amd/car/post_cache_as_ram.c"
#include "cpu/amd/microcode/microcode.c"
+
+#if CONFIG_UPDATE_CPU_MICROCODE
#include "cpu/amd/model_10xxx/update_microcode.c"
+#endif
+
#include "cpu/amd/model_10xxx/init_cpus.c"
-#include "southbridge/nvidia/mcp55/mcp55_enable_rom.c"
#include "northbridge/amd/amdfam10/early_ht.c"
static void sio_setup(void)
set_bsp_node_CHtExtNodeCfgEn();
enumerate_ht_chain();
sio_setup();
- mcp55_enable_rom();
}
post_code(0x30);
post_code(0x32);
- pnp_enter_ext_func_mode(SERIAL_DEV);
- pnp_write_config(SERIAL_DEV, 0x24, 0x84 | (1 << 6));
- w83627hf_enable_dev(SERIAL_DEV, CONFIG_TTYS0_BASE);
- pnp_exit_ext_func_mode(SERIAL_DEV);
+ w83627hf_set_clksel_48(DUMMY_DEV);
+ w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
- uart_init();
console_init();
write_GPIO();
printk(BIOS_DEBUG, "\n");
/* Setup sysinfo defaults */
set_sysinfo_in_ram(0);
+#if CONFIG_UPDATE_CPU_MICROCODE
update_microcode(val);
+#endif
post_code(0x33);
cpuSetAMDMSR();
raminit_amdmct(sysinfo);
post_code(0x41);
-// printk(BIOS_DEBUG, "\n*** Yes, the copy/decompress is taking a while, FIXME!\n");
post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
post_code(0x42); // Should never see this post code.
}
+
+/**
+ * BOOL AMD_CB_ManualBUIDSwapList(u8 Node, u8 Link, u8 **List)
+ * Description:
+ * This routine is called every time a non-coherent chain is processed.
+ * BUID assignment may be controlled explicitly on a non-coherent chain. Provide a
+ * swap list. The first part of the list controls the BUID assignment and the
+ * second part of the list provides the device to device linking. Device orientation
+ * can be detected automatically, or explicitly. See documentation for more details.
+ *
+ * Automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially
+ * based on each device's unit count.
+ *
+ * Parameters:
+ * @param[in] u8 node = The node on which this chain is located
+ * @param[in] u8 link = The link on the host for this chain
+ * @param[out] u8** list = supply a pointer to a list
+ * @param[out] BOOL result = true to use a manual list
+ * false to initialize the link automatically
+ */
+BOOL AMD_CB_ManualBUIDSwapList (u8 node, u8 link, const u8 **List)
+{
+ static const u8 swaplist[] = { 0xFF, CONFIG_HT_CHAIN_UNITID_BASE, CONFIG_HT_CHAIN_END_UNITID_BASE, 0xFF };
+ /* If the BUID was adjusted in early_ht we need to do the manual override */
+ if ((CONFIG_HT_CHAIN_UNITID_BASE != 0) && (CONFIG_HT_CHAIN_END_UNITID_BASE != 0)) {
+ printk(BIOS_DEBUG, "AMD_CB_ManualBUIDSwapList()\n");
+ if ((node == 0) && (link == 0)) { /* BSP SB link */
+ *List = swaplist;
+ return 1;
+ }
+ }
+
+ return 0;
+}