* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#if CONFIG_LOGICAL_CPUS==1
-#define SET_NB_CFG_54 1
-#endif
-
-// used by init_cpus and fidvid
-#define SET_FIDVID 1
-//if we want to wait for core1 done before DQS training, set it to 0
-#define SET_FIDVID_CORE0_ONLY 1
-
#if CONFIG_K8_REV_F_SUPPORT == 1
#define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0
#endif
#include <arch/romcc_io.h>
#include <cpu/x86/lapic.h>
#include <pc80/mc146818rtc.h>
-
#include <console/console.h>
#include <lib.h>
-
+#include <spd.h>
#include <cpu/amd/model_fxx_rev.h>
-
-// for enable the FAN
-#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c"
+#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c" // for enable the FAN
#include "northbridge/amd/amdk8/raminit.h"
#include "cpu/amd/model_fxx/apic_timer.c"
#include "lib/delay.c"
-
#include "cpu/x86/lapic/boot_cpu.c"
#include "northbridge/amd/amdk8/reset_test.c"
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
#include "superio/winbond/w83627hf/w83627hf_early_init.c"
-
#include "cpu/x86/bist.h"
-
#include "northbridge/amd/amdk8/debug.c"
-
#include "cpu/x86/mtrr/earlymtrr.c"
-
#include "northbridge/amd/amdk8/setup_resource_map.c"
+#include "southbridge/nvidia/mcp55/mcp55_early_ctrl.c"
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-#include "southbridge/nvidia/mcp55/mcp55_early_ctrl.c"
-
static void memreset(int controllers, const struct mem_controller *ctrl)
{
}
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "northbridge/amd/amdk8/raminit_f.c"
#include "lib/generic_sdram.c"
-
#include "resourcemap.c"
-
#include "cpu/amd/dualcore/dualcore.c"
-
-#define MCP55_PCI_E_X_0 4
-
#include "southbridge/nvidia/mcp55/mcp55_early_setup_ss.h"
#include "southbridge/nvidia/mcp55/mcp55_early_setup_car.c"
-
#include "cpu/amd/car/post_cache_as_ram.c"
-
#include "cpu/amd/model_fxx/init_cpus.c"
-
#include "cpu/amd/model_fxx/fidvid.c"
-
#include "southbridge/nvidia/mcp55/mcp55_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
*/
static const uint16_t spd_addr[] = {
// Node 0
- RC0 | (0xa << 3) | 0, RC0 | (0xa << 3) | 2,
- RC0 | (0xa << 3) | 4, RC0 | (0xa << 3) | 6,
- RC0 | (0xa << 3) | 1, RC0 | (0xa << 3) | 3,
- RC0 | (0xa << 3) | 5, RC0 | (0xa << 3) | 7,
+ RC0 | DIMM0, RC0 | DIMM2,
+ RC0 | DIMM4, RC0 | DIMM6,
+ RC0 | DIMM1, RC0 | DIMM3,
+ RC0 | DIMM5, RC0 | DIMM7,
// Node 1
- RC1 | (0xa << 3) | 0, RC1 | (0xa << 3) | 2,
- RC1 | (0xa << 3) | 4, RC1 | (0xa << 3) | 6,
- RC1 | (0xa << 3) | 1, RC1 | (0xa << 3) | 3,
- RC1 | (0xa << 3) | 5, RC1 | (0xa << 3) | 7,
+ RC1 | DIMM0, RC1 | DIMM2,
+ RC1 | DIMM4, RC1 | DIMM6,
+ RC1 | DIMM1, RC1 | DIMM3,
+ RC1 | DIMM5, RC1 | DIMM7,
};
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE
/* it will set up chains and store link pair for optimization later */
ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
-#if SET_FIDVID == 1
+#if CONFIG_SET_FIDVID
{
msr_t msr;
sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
post_cache_as_ram(); // bsp swtich stack to ram and copy sysinfo ram now
-
}
-