Move "select CACHE_AS_RAM" lines from boards into CPU socket.

[coreboot.git] / src / mainboard / supermicro / h8dme / Kconfig

diff --git a/src/mainboard/supermicro/h8dme/Kconfig b/src/mainboard/supermicro/h8dme/Kconfig
index d116b6f7c9ca85ea1ba951d2b0a6b07547e8a5f4..0259b4af0c52901c57ac60ca11a785ddbfb65a96 100644 (file)
--- a/src/mainboard/supermicro/h8dme/Kconfig
+++ b/src/mainboard/supermicro/h8dme/Kconfig
@@ -1,130 +1,92 @@
-config BOARD_SUPERMICRO_H8DME
-       bool "H8DME"
+if BOARD_SUPERMICRO_H8DME
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+       def_bool y
        select ARCH_X86
-       select CPU_AMD_K8
        select CPU_AMD_SOCKET_F
+       select DIMM_DDR2
+       select DIMM_REGISTERED
        select NORTHBRIDGE_AMD_AMDK8
        select NORTHBRIDGE_AMD_AMDK8_ROOT_COMPLEX
        select SOUTHBRIDGE_NVIDIA_MCP55
+       select MCP55_USE_NIC
+       select MCP55_USE_AZA
        select SUPERIO_WINBOND_W83627HF
+       select HAVE_OPTION_TABLE
+       select HAVE_BUS_CONFIG
        select HAVE_PIRQ_TABLE
-       select USE_PRINTK_IN_CAR
-       select USE_DCACHE_RAM
-       help
-         Supermicro H8DME mainboard.
+       select HAVE_MP_TABLE
+       select HAVE_HARD_RESET
+       #select AP_CODE_IN_CAR
+       select LIFT_BSP_APIC_ID
+       select BOARD_ROMSIZE_KB_1024
+       select RAMINIT_SYSINFO
+       select QRANK_DIMM_SUPPORT
+       select K8_ALLOCATE_IO_RANGE
+       select SET_FIDVID
 
 config MAINBOARD_DIR
        string
        default supermicro/h8dme
-       depends on BOARD_SUPERMICRO_H8DME
 
 config DCACHE_RAM_BASE
        hex
        default 0xc8000
-       depends on BOARD_SUPERMICRO_H8DME
 
 config DCACHE_RAM_SIZE
        hex
        default 0x08000
-       depends on BOARD_SUPERMICRO_H8DME
 
 config DCACHE_RAM_GLOBAL_VAR_SIZE
        hex
        default 0x01000
-       depends on BOARD_SUPERMICRO_H8DME
 
 config APIC_ID_OFFSET
        hex
        default 0x10
-       depends on BOARD_SUPERMICRO_H8DME
-
-config HAVE_HARD_RESET
-       bool
-       default y
-       depends on BOARD_SUPERMICRO_H8DME
 
-config IOAPIC
-       bool
-       default y
-       depends on BOARD_SUPERMICRO_H8DME
+config MEM_TRAIN_SEQ
+       int
+       default 1
 
 config SB_HT_CHAIN_ON_BUS0
        int
        default 2
-       depends on BOARD_SUPERMICRO_H8DME
-
-config SB_HT_CHAIN_UNITID_OFFSET_ONLY
-       bool
-       default n
-       depends on BOARD_SUPERMICRO_H8DME
-
-config LB_CKS_RANGE_END
-       int
-       default 122
-       depends on BOARD_SUPERMICRO_H8DME
-
-config LB_CKS_LOC
-       int
-       default 123
-       depends on BOARD_SUPERMICRO_H8DME
 
 config MAINBOARD_PART_NUMBER
        string
-       default "ultra40"
-       depends on BOARD_SUPERMICRO_H8DME
-
-config HW_MEM_HOLE_SIZEK
-       hex
-       default 0x100000
-       depends on BOARD_SUPERMICRO_H8DME
-
-config HAVE_FAILOVER_BOOT
-       bool
-       default n
-       depends on BOARD_SUPERMICRO_H8DME
-
-config USE_FAILOVER_IMAGE
-       bool
-       default n
-       depends on BOARD_SUPERMICRO_H8DME
+       default "H8DME-2"
 
 config MAX_CPUS
        int
        default 4
-       depends on BOARD_SUPERMICRO_H8DME
 
 config MAX_PHYSICAL_CPUS
        int
        default 2
-       depends on BOARD_SUPERMICRO_H8DME
 
 config HT_CHAIN_END_UNITID_BASE
        hex
-       default 0x0
-       depends on BOARD_SUPERMICRO_H8DME
+       default 0x20
 
 config HT_CHAIN_UNITID_BASE
        hex
        default 0x0
-       depends on BOARD_SUPERMICRO_H8DME
-
-config USE_INIT
-       bool
-       default n
-       depends on BOARD_SUPERMICRO_H8DME
 
 config SB_HT_CHAIN_ON_BUS0
        int
        default 2
-       depends on BOARD_SUPERMICRO_H8DME
 
-config CONSOLE_VGA
-       bool
-       default y
-       depends on BOARD_SUPERMICRO_H8DME
+config IRQ_SLOT_COUNT
+       int
+       default 11
+
+config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
+       hex
+       default 0x15d9
 
-config PCI_ROM_RUN
-       bool
-       default y
-       depends on BOARD_SUPERMICRO_H8DME
+config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
+       hex
+       default 0x1511
 
+endif # BOARD_SUPERMICRO_H8DME