-#define ASSEMBLY 1
-#define __PRE_RAM__
-
-
-#define K8_ALLOCATE_IO_RANGE 1
-
-#define QRANK_DIMM_SUPPORT 1
-
-#if CONFIG_LOGICAL_CPUS==1
-#define SET_NB_CFG_54 1
-#endif
-
-
#include <stdint.h>
#include <string.h>
#include <device/pci_def.h>
#include <device/pnp_def.h>
#include <arch/romcc_io.h>
#include <cpu/x86/lapic.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "lib/ramtest.c"
-
+#include <pc80/mc146818rtc.h>
+#include <console/console.h>
+#include <lib.h>
+#include <spd.h>
#include <cpu/amd/model_fxx_rev.h>
#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "southbridge/nvidia/ck804/ck804_early_smbus.c"
+#include "southbridge/nvidia/ck804/ck804_early_smbus.h"
#include "northbridge/amd/amdk8/raminit.h"
#include "cpu/amd/model_fxx/apic_timer.c"
#include "lib/delay.c"
-
#include "cpu/x86/lapic/boot_cpu.c"
#include "northbridge/amd/amdk8/reset_test.c"
#include "northbridge/amd/amdk8/debug.c"
#include "superio/smsc/lpc47b397/lpc47b397_early_serial.c"
-
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
+#include "cpu/x86/mtrr/earlymtrr.c"
#include "cpu/x86/bist.h"
-
#include "superio/smsc/lpc47b397/lpc47b397_early_gpio.c"
-
#include "northbridge/amd/amdk8/setup_resource_map.c"
#define SERIAL_DEV PNP_DEV(0x2e, LPC47B397_SP1)
-
-static void memreset_setup(void)
-{
-}
+#define SUPERIO_GPIO_DEV PNP_DEV(0x2e, LPC47B397_RT)
+#define SUPERIO_GPIO_IO_BASE 0x400
static void memreset(int controllers, const struct mem_controller *ctrl)
{
}
-#define SUPERIO_GPIO_DEV PNP_DEV(0x2e, LPC47B397_RT)
-
-#define SUPERIO_GPIO_IO_BASE 0x400
-
-static void sio_gpio_setup(void){
-
+#ifdef ENABLE_ONBOARD_SCSI
+static void sio_gpio_setup(void)
+{
unsigned value;
/*Enable onboard scsi*/
- lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x2c, (1<<7)|(0<<2)|(0<<1)|(0<<0)); // GP21, offset 0x2c, DISABLE_SCSI_L
+ lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x2c, (1<<7)|(0<<2)|(0<<1)|(0<<0)); // GP21, offset 0x2c, DISABLE_SCSI_L
value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x4c);
lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x4c, (value|(1<<1)));
-
}
+#endif
static inline void activate_spd_rom(const struct mem_controller *ctrl)
{
return smbus_read_byte(device, address);
}
-
#include "northbridge/amd/amdk8/raminit.c"
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "lib/generic_sdram.c"
-
- /* tyan does not want the default */
-#include "resourcemap.c"
-
+#include "resourcemap.c" /* tyan does not want the default */
#include "cpu/amd/dualcore/dualcore.c"
-
-#define CK804_NUM 2
-#define CK804_USE_NIC 1
-#define CK804_USE_ACI 1
-
#include "southbridge/nvidia/ck804/ck804_early_setup_ss.h"
//set GPIO to input mode
RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/
#include "southbridge/nvidia/ck804/ck804_early_setup_car.c"
-
-#include "cpu/amd/car/copy_and_run.c"
-
#include "cpu/amd/car/post_cache_as_ram.c"
-
#include "cpu/amd/model_fxx/init_cpus.c"
-
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
-#include "southbridge/nvidia/ck804/ck804_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
-
static void sio_setup(void)
{
-
unsigned value;
uint32_t dword;
uint8_t byte;
-
pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1, 0), 0xac, 0x047f0400);
-
+
byte = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b);
- byte |= 0x20;
+ byte |= 0x20;
pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte);
-
+
dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0);
dword |= (1<<29)|(1<<0);
pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword);
-
-#if 1
+
lpc47b397_enable_serial(SUPERIO_GPIO_DEV, SUPERIO_GPIO_IO_BASE);
-
+
value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x77);
- value &= 0xbf;
+ value &= 0xbf;
lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x77, value);
-#endif
-
}
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- unsigned last_boot_normal_x = last_boot_normal();
-
- /* Is this a cpu only reset? or Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal_x) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- sio_setup();
-
- /* Setup the ck804 */
- ck804_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal_x) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
- );
-
- fallback_image:
- ;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr [] = {
- (0xa<<3)|0, (0xa<<3)|2, 0, 0,
- (0xa<<3)|1, (0xa<<3)|3, 0, 0,
-#if CONFIG_MAX_PHYSICAL_CPUS > 1
- (0xa<<3)|4, (0xa<<3)|6, 0, 0,
- (0xa<<3)|5, (0xa<<3)|7, 0, 0,
-#endif
+ // Node 0
+ DIMM0, DIMM2, 0, 0,
+ DIMM1, DIMM3, 0, 0,
+ // Node 1
+ DIMM4, DIMM6, 0, 0,
+ DIMM5, DIMM7, 0, 0,
};
int needs_reset;
struct mem_controller ctrl[8];
unsigned nodes;
+ if (!cpu_init_detectedx && boot_cpu()) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ sio_setup();
+ }
+
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx);
}
lpc47b397_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
console_init();
-
+
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
needs_reset |= ck804_early_setup_x();
if (needs_reset) {
- print_info("ht reset -\r\n");
+ print_info("ht reset -\n");
soft_reset();
}
enable_smbus();
- memreset_setup();
sdram_initialize(nodes, ctrl);
post_cache_as_ram();