Use subsystem id from devicetree.cb instead of Kconfig and move

[coreboot.git] / src / mainboard / sunw / ultra40 / Kconfig

diff --git a/src/mainboard/sunw/ultra40/Kconfig b/src/mainboard/sunw/ultra40/Kconfig
index 89fa61971d474d5c4415c66682fe73daef8599a9..81a6608208bcf63d187218b0261add3473b51a35 100644 (file)
--- a/src/mainboard/sunw/ultra40/Kconfig
+++ b/src/mainboard/sunw/ultra40/Kconfig
@@ -1,122 +1,78 @@
-config BOARD_SUNW_ULTRA40
-       bool "Ultra 40"
+if BOARD_SUNW_ULTRA40
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+       def_bool y
        select ARCH_X86
-       select CPU_AMD_K8
        select CPU_AMD_SOCKET_940
        select NORTHBRIDGE_AMD_AMDK8
        select NORTHBRIDGE_AMD_AMDK8_ROOT_COMPLEX
        select SOUTHBRIDGE_NVIDIA_CK804
        select SUPERIO_SMSC_LPC47M10X
+       select HAVE_OPTION_TABLE
+       select HAVE_BUS_CONFIG
        select HAVE_PIRQ_TABLE
-       select USE_PRINTK_IN_CAR
-       select USE_DCACHE_RAM
+       select HAVE_MP_TABLE
+       select HAVE_HARD_RESET
+       select BOARD_ROMSIZE_KB_1024
+       select CK804_USE_NIC
+       select CK804_USE_ACI
+       select QRANK_DIMM_SUPPORT
+       select K8_ALLOCATE_IO_RANGE
 
 config MAINBOARD_DIR
        string
        default sunw/ultra40
-       depends on BOARD_SUNW_ULTRA40
 
 config DCACHE_RAM_BASE
        hex
        default 0xcf000
-       depends on BOARD_SUNW_ULTRA40
 
 config DCACHE_RAM_SIZE
        hex
        default 0x01000
-       depends on BOARD_SUNW_ULTRA40
 
 config APIC_ID_OFFSET
        hex
        default 0x10
-       depends on BOARD_SUNW_ULTRA40
-
-config HAVE_HARD_RESET
-       bool
-       default y
-       depends on BOARD_SUNW_ULTRA40
-
-config IOAPIC
-       bool
-       default y
-       depends on BOARD_SUNW_ULTRA40
 
 config K8_REV_F_SUPPORT
        bool
        default n
-       depends on BOARD_SUNW_ULTRA40
 
-config SB_HT_CHAIN_ON_BUS0
+config CK804_NUM
        int
        default 2
-       depends on BOARD_SUNW_ULTRA40
 
-config SB_HT_CHAIN_UNITID_OFFSET_ONLY
-       bool
-       default n
-       depends on BOARD_SUNW_ULTRA40
-
-config LB_CKS_RANGE_END
-       int
-       default 122
-       depends on BOARD_SUNW_ULTRA40
-
-config LB_CKS_LOC
+config SB_HT_CHAIN_ON_BUS0
        int
-       default 123
-       depends on BOARD_SUNW_ULTRA40
+       default 2
 
 config MAINBOARD_PART_NUMBER
        string
-       default "ultra40"
-       depends on BOARD_SUNW_ULTRA40
-
-config HW_MEM_HOLE_SIZEK
-       hex
-       default 0x100000
-       depends on BOARD_SUNW_ULTRA40
+       default "Ultra 40"
 
 config MAX_CPUS
        int
        default 4
-       depends on BOARD_SUNW_ULTRA40
 
 config MAX_PHYSICAL_CPUS
        int
        default 2
-       depends on BOARD_SUNW_ULTRA40
 
 config HT_CHAIN_END_UNITID_BASE
        hex
-       default 0x0
-       depends on BOARD_SUNW_ULTRA40
+       default 0x20
 
 config HT_CHAIN_UNITID_BASE
        hex
        default 0x0
-       depends on BOARD_SUNW_ULTRA40
-
-config USE_INIT
-       bool
-       default n
-       depends on BOARD_SUNW_ULTRA40
 
 config SB_HT_CHAIN_ON_BUS0
        int
        default 2
-       depends on BOARD_SUNW_ULTRA40
-
-config CONSOLE_VGA
-       bool
-       default y
-       depends on BOARD_SUNW_ULTRA40
-
-config PCI_ROM_RUN
-       bool
-       default y
-       depends on BOARD_SUNW_ULTRA40
 
 config IRQ_SLOT_COUNT
        int
        default 11
-       depends on BOARD_SUNW_ULTRA40
+
+endif # BOARD_SUNW_ULTRA40