-##
-## Compute the location and size of where this firmware image
-## (linuxBIOS plus bootloader) will live in the boot rom chip.
-##
-if USE_FALLBACK_IMAGE
- default ROM_SECTION_SIZE = FALLBACK_SIZE
- default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
-else
- default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE )
- default ROM_SECTION_OFFSET = 0
-end
-
-##
-## Compute the start location and size size of
-## The linuxBIOS bootloader.
-##
-default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
-default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
-default CONFIG_ROM_STREAM = 1
-
-##
-## Compute where this copy of linuxBIOS will start in the boot rom
-##
-default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE )
-
-##
-## Compute a range of ROM that can cached to speed up linuxBIOS,
-## execution speed.
-##
-## XIP_ROM_SIZE must be a power of 2.
-## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
-##
-default XIP_ROM_SIZE=65536
-default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
+## CONFIG_XIP_ROM_SIZE must be a power of 2.
+default CONFIG_XIP_ROM_SIZE = 64 * 1024
+include /config/nofailovercalculation.lb
+default CONFIG_ROM_PAYLOAD = 1
arch i386 end
#needed by irq_tables and mptable and acpi_tables
object get_bus_conf.o
-if HAVE_MP_TABLE object mptable.o end
-if HAVE_PIRQ_TABLE object irq_tables.o end
-#object reset.o
-if USE_DCACHE_RAM
-
+if CONFIG_GENERATE_MP_TABLE object mptable.o end
+if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
if CONFIG_USE_INIT
makerule ./auto.o
- depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o"
+ depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
+ action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
end
else
makerule ./auto.inc
- depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@"
- action "perl -e 's/.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/.text/.section .rom.text/g' -pi $@"
+ depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
+ action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
+ action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
+ action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
end
end
-else
- ##
- ## Romcc output
- ##
- makerule ./failover.E
- depends "$(MAINBOARD)/failover.c ./romcc"
- action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
- end
-
- makerule ./failover.inc
- depends "$(MAINBOARD)/failover.c ./romcc"
- action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
- end
-
- makerule ./auto.E
- depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
- action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
- end
-
- makerule ./auto.inc
- depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
- action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
- end
-
-end
-
##
-## Build our 16 bit and 32 bit linuxBIOS entry code
+## Build our 16 bit and 32 bit coreboot entry code
##
-if USE_FALLBACK_IMAGE
+if CONFIG_USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/entry16.inc
ldscript /cpu/x86/16bit/entry16.lds
end
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
-
##
-## Build our reset vector (This is where linuxBIOS is entered)
+## Build our reset vector (This is where coreboot is entered)
##
-if USE_FALLBACK_IMAGE
+if CONFIG_USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/reset16.inc
ldscript /cpu/x86/16bit/reset16.lds
else
ldscript /cpu/x86/32bit/reset32.lds
end
-if USE_DCACHE_RAM
-else
- ### Should this be in the northbridge code?
- mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
##
## Include an id string (For safe flashing)
##
-mainboardinit southbridge/nvidia/ck804/id.inc
-ldscript /southbridge/nvidia/ck804/id.lds
+mainboardinit arch/i386/lib/id.inc
+ldscript /arch/i386/lib/id.lds
##
## ROMSTRAP table for CK804
##
-if USE_FALLBACK_IMAGE
+if CONFIG_USE_FALLBACK_IMAGE
mainboardinit southbridge/nvidia/ck804/romstrap.inc
ldscript /southbridge/nvidia/ck804/romstrap.lds
end
-
-
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
###
-### This is the early phase of linuxBIOS startup
+### This is the early phase of coreboot startup
### Things are delicate and we test to see if we should
### failover to another image.
###
-if USE_FALLBACK_IMAGE
+if CONFIG_USE_FALLBACK_IMAGE
ldscript /arch/i386/lib/failover.lds
- if USE_DCACHE_RAM
- else
- mainboardinit ./failover.inc
- end
end
##
## Setup RAM
##
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
initobject auto.o
else
mainboardinit ./auto.inc
end
-else
- # ROMCC
- mainboardinit cpu/x86/fpu/enable_fpu.inc
- mainboardinit cpu/x86/mmx/enable_mmx.inc
- mainboardinit cpu/x86/sse/enable_sse.inc
- mainboardinit ./auto.inc
- mainboardinit cpu/x86/sse/disable_sse.inc
- mainboardinit cpu/x86/mmx/disable_mmx.inc
-
-end
-
##
## Include the secondary Configuration files
##
-if CONFIG_CHIP_NAME
- config chip.h
-end
+config chip.h
# sample config for tyan/s2895
chip northbridge/amd/amdk8/root_complex
chip southbridge/nvidia/ck804
device pci 0.0 on end # HT
device pci 1.0 on # LPC
- chip superio/smsc/lpc47b397
- device pnp 2e.0 on # Floppy
+ chip superio/smsc/lpc47m10x
+ device pnp 2e.0 off # Floppy
io 0x60 = 0x3f0
irq 0x70 = 6
drq 0x74 = 2
io 0x60 = 0x2f8
irq 0x70 = 3
end
- device pnp 2e.7 on # Keyboard
+ device pnp 2e.7 off # Keyboard
io 0x60 = 0x60
io 0x62 = 0x64
irq 0x70 = 1
irq 0x72 = 12
end
- device pnp 2e.8 on # HW Monitor
- io 0x60 = 0x290
- chip drivers/generic/generic # LM95221 CPU temp
- device i2c 2b on end
- end
- chip drivers/generic/generic # EMCT03
- device i2c 54 on end
- end
- end
- device pnp 2e.a on # RT
- io 0x60 = 0x400
- end
end
end
device pci 1.1 on # SM 0
register "ide1_enable" = "1"
register "sata0_enable" = "1"
register "sata1_enable" = "1"
-# register "nic_rom_address" = "0xfff80000" # 64k
-# register "raid_rom_address" = "0xfff90000"
register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1
register "mac_eeprom_addr" = "0x51"
end
device pci c.0 off end # PCI E 2
device pci d.0 off end # PCI E 1
device pci e.0 on end # PCI E 0
-# register "nic_rom_address" = "0xfff80000" # 64k
register "mac_eeprom_smbus" = "3"
register "mac_eeprom_addr" = "0x51"
end
projects / coreboot.git / blobdiff