/*
* This code is derived from the Tyan s2882 romstage.c
* Adapted by Stefan Reinauer <stepan@coresystems.de>
- * Additional (C) 2007 coresystems GmbH
+ * Additional (C) 2007 coresystems GmbH
*/
-
#include <stdint.h>
#include <string.h>
#include <device/pci_def.h>
#include <device/pnp_def.h>
#include <arch/romcc_io.h>
#include <cpu/x86/lapic.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "lib/ramtest.c"
-
-#if 0
-static void post_code(uint8_t value) {
-#if 1
- int i;
- for(i=0;i<0x80000;i++) {
- outb(value, 0x80);
- }
-#endif
-}
-#endif
-
+#include <pc80/mc146818rtc.h>
+#include <console/console.h>
+#include <lib.h>
+#include <spd.h>
#include <cpu/amd/model_fxx_rev.h>
-
#include "northbridge/amd/amdk8/incoherent_ht.c"
#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
#include "northbridge/amd/amdk8/raminit.h"
#include "cpu/amd/model_fxx/apic_timer.c"
#include "lib/delay.c"
-
#include "cpu/x86/lapic/boot_cpu.c"
#include "northbridge/amd/amdk8/reset_test.c"
#include "northbridge/amd/amdk8/debug.c"
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
+#include "cpu/x86/mtrr/earlymtrr.c"
#include "cpu/x86/bist.h"
-
#include "northbridge/amd/amdk8/setup_resource_map.c"
+#include "southbridge/amd/amd8111/amd8111_early_ctrl.c"
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-#include "southbridge/amd/amd8111/amd8111_early_ctrl.c"
-
static void memreset_setup(void)
{
if (is_cpu_pre_c0()) {
return smbus_read_byte(device, address);
}
-#define QRANK_DIMM_SUPPORT 1
-
#include "northbridge/amd/amdk8/raminit.c"
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "lib/generic_sdram.c"
-
- /* newisys khepri does not want the default */
-#include "resourcemap.c"
-
-#if CONFIG_LOGICAL_CPUS==1
-#define SET_NB_CFG_54 1
-#endif
+#include "resourcemap.c" /* newisys khepri does not want the default */
#include "cpu/amd/dualcore/dualcore.c"
-
-#include "cpu/amd/car/copy_and_run.c"
-
#include "cpu/amd/car/post_cache_as_ram.c"
-
#include "cpu/amd/model_fxx/init_cpus.c"
-
#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr [] = {
- (0xa<<3)|0, (0xa<<3)|2, 0, 0,
- (0xa<<3)|1, (0xa<<3)|3, 0, 0,
+ DIMM0, DIMM2, 0, 0,
+ DIMM1, DIMM3, 0, 0,
#if CONFIG_MAX_PHYSICAL_CPUS > 1
- (0xa<<3)|4, (0xa<<3)|6, 0, 0,
- (0xa<<3)|5, (0xa<<3)|7, 0, 0,
+ DIMM4, DIMM6, 0, 0,
+ DIMM5, DIMM7, 0, 0,
#endif
};
}
// post_code(0x32);
-
+
w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
console_init();
// dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE);
-
+
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
needs_reset |= ht_setup_chains_x();
if (needs_reset) {
- print_info("ht reset -\r\n");
+ print_info("ht reset -\n");
soft_reset();
}
#endif
post_cache_as_ram();
-
}
-