* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#define ASSEMBLY 1
-#define __PRE_RAM__
-
-#define RAMINIT_SYSINFO 1
-#define CACHE_AS_RAM_ADDRESS_DEBUG 0
-
#define SET_NB_CFG_54 1
-//used by raminit
-#define QRANK_DIMM_SUPPORT 1
-
//used by incoherent_ht
//#define K8_ALLOCATE_IO_RANGE 1
//used by init_cpus and fidvid
-#define K8_SET_FIDVID 1
+#define SET_FIDVID 1
//if we want to wait for core1 done before DQS training, set it to 0
-#define K8_SET_FIDVID_CORE0_ONLY 1
+#define SET_FIDVID_CORE0_ONLY 1
#include <stdint.h>
#include <string.h>
#include <device/pnp_def.h>
#include <arch/romcc_io.h>
#include <cpu/x86/lapic.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-
-#if 0
-static void post_code(uint8_t value) {
-#if 1
- int i;
- for(i=0;i<0x80000;i++) {
- outb(value, 0x80);
- }
-#endif
-}
-#endif
+#include <pc80/mc146818rtc.h>
+#include <console/console.h>
#include <cpu/amd/model_fxx_rev.h>
#include "southbridge/broadcom/bcm5785/bcm5785_early_smbus.c"
+#include "southbridge/broadcom/bcm5785/bcm5785_enable_rom.c"
#include "northbridge/amd/amdk8/raminit.h"
#include "cpu/amd/model_fxx/apic_timer.c"
#include "lib/delay.c"
-
+#include <reset.h>
#include "cpu/x86/lapic/boot_cpu.c"
#include "northbridge/amd/amdk8/reset_test.c"
#include "northbridge/amd/amdk8/debug.c"
#include "superio/nsc/pc87417/pc87417_early_serial.c"
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
+#include "cpu/x86/mtrr/earlymtrr.c"
#include "cpu/x86/bist.h"
#include "northbridge/amd/amdk8/setup_resource_map.c"
#define SERIAL_DEV PNP_DEV(0x2e, PC87417_SP1)
#define RTC_DEV PNP_DEV(0x2e, PC87417_RTC)
#include "southbridge/broadcom/bcm5785/bcm5785_early_setup.c"
-static void memreset_setup(void)
-{
-}
static void memreset(int controllers, const struct mem_controller *ctrl)
{
}
#endif
-
-
static inline int spd_read_byte(unsigned device, unsigned address)
{
return smbus_read_byte(device, address);
}
#include "northbridge/amd/amdk8/amdk8_f.h"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-
#include "northbridge/amd/amdk8/incoherent_ht.c"
-
+#include "northbridge/amd/amdk8/coherent_ht.c"
#include "northbridge/amd/amdk8/raminit_f.c"
-
#include "lib/generic_sdram.c"
/* msi does not want the default */
#define DIMM6 0x56
#define DIMM7 0x57
-
-#include "cpu/amd/car/copy_and_run.c"
#include "cpu/amd/car/post_cache_as_ram.c"
#include "cpu/amd/model_fxx/init_cpus.c"
//first node
RC0|DIMM0, RC0|DIMM2, RC0|DIMM4, RC0|DIMM6,
RC0|DIMM1, RC0|DIMM3, RC0|DIMM5, RC0|DIMM7,
-#if CONFIG_MAX_PHYSICAL_CPUS > 1
//second node
RC1|DIMM0, RC1|DIMM2, RC1|DIMM4, RC1|DIMM6,
RC1|DIMM1, RC1|DIMM3, RC1|DIMM5, RC1|DIMM7,
-#endif
-
};
- struct sys_info *sysinfo = (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
+ struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE +
+ CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
int needs_reset;
unsigned bsp_apicid = 0;
dump_pci_device(PCI_DEV(0, 0x19, 0));
#endif
- print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\r\n");
+ print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\n");
setup_coherent_ht_domain();
bcm5785_early_setup();
-
#if 0
//it your CPU min fid is 1G, you can change HT to 1G and FID to max one time.
needs_reset = optimize_link_coherent_ht();
needs_reset |= optimize_link_incoherent_ht(sysinfo);
#endif
-#if K8_SET_FIDVID == 1
+#if SET_FIDVID == 1
{
msr_t msr;
msr=rdmsr(0xc0010042);
- print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n");
+ print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
}
{
msr_t msr;
msr=rdmsr(0xc0010042);
- print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n");
+ print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
}
#endif
// fidvid change will issue one LDTSTOP and the HT change will be effective too
if (needs_reset) {
- print_info("ht reset -\r\n");
+ print_info("ht reset -\n");
soft_reset();
}
#endif
}
#endif
- memreset_setup();
-
//do we need apci timer, tsc...., only debug need it for better output
/* all ap stopped? */
// init_timer(); // Need to use TMICT to synconize FID/VID
post_cache_as_ram();
-
}
+